B&S
Showing all 9 results
-
HMI lighting
B&S EB Ballast 1.2-1.8kW
Electronic ballast (universal) for use with 1200 W and 1800 W Metal Halide Lamps.
FEATURES
• Available for daylight lamps of all well-known manufacturers.
• Automatic detection of the connected luminaires 1200 W and 1800 W.
• Lamp power constant controlled for steady light quality independent of line voltage and of the age of the bulb used.
• Flicker free operation by use of 75 Hz square wave current.
• Typical light ripple max. 3% .
• Dimming in range of 50 – 100% of nominal lamp power.
• With active line filter (PFC) for minimized apparent power and reduced disturbances of power supply network.
• CCL (Compensation of Cable Losses): The CCL function compensates the electrical losses on head to ballast cables by automatically increasing the output power (only in conjunction with suitable 1800 W luminaires).
• Large range for input voltage 90 – 130V~ / 180 – 250 V~ (auto – switching).
• Protection against line overvoltage and overtemperature.
• Lamp outlet protected against no-load conditions and short circuit.
• Solid aluminium construction with inside heat sinks.
• Very silent due to temperature regulated fan.
• Optionally equipped with digital remote control (DMX 512).SPECIFICATIONS
• Lamp Power: 1200 / 1800 W.
• Supply Voltage: 90 – 130V~ / 180 – 250 V~ 50 / 60 Hz 1,N,PE.
• Line Power: 2600 VA (max.).
• Power Factor: cos φ ≈ 0.98.
• Dimensions: 200 mm x 156 mm x 335 mm.
• Weight: approx. 8 kg.SKU: n/a -
HMI lighting
B&S EB Ballast 12-18kW
Electronic ballast (universal) for use with 12000 W and 18000 W Metal Halide Lamps.
FEATURES
• Available for daylight lamps of all well-known manufacturers.
• Electronic detection of the used lamp types 12000 W and 18000 W.
• Lamp power constant controlled for steady light quality independent of line voltage and of the age of the bulb used.
• Flicker free operation by use of 75 Hz square wave current.
• Typical light ripple max. 3%.
• Additional `low-noise` modes (50 Hz / 60 Hz) to reduce the noise that might occur in the lamp head.
• Optionally equipped with 300 Hz operation mode for use with digital ‘high speed’ cameras.
• “Arc Control” to prevent unintended resonance arising inside bulbs of different designs.
• Dimming in range of 50 – 100% of nominal lamp power.
• With active line filter (PFC) for minimized apparent power and reduced disturbances of Power supply network.
• Large range for input voltage 190 – 250 V~.
• Protection against line overvoltage and overtemperature.
• Lamp outlet protected against no-load conditions and short circuit.
• Solid aluminium construction witch outside heat sinks.
• Silent due to temperature regulated fans.
• Optionally equipped with digital remote control (DMX512).
• Caddie for transport included.SPECIFICATIONS
• Lamp Power: 12000 W / 18000 W.
• Supply Voltage: 190 – 250 V~ 50 / 60 Hz 1,N,PE.
• Line Power: 12 kW: 13000 VA (max.), 18 kW: 19400 VA (max.).
• Power Factor : cos φ ≈0.98.
• Dimensions: 283 mm x 548 mm x 506 mm.
• Weight: approx. 49 kg (64 kg incl. caddie).SKU: n/a -
HMI lighting
B&S EB Ballast 125-200W
Electronic ballast (universal) for use with 125 W and 200 W Metal Halide Lamps.
FEATURES
• Available for daylight lamps of all well-known manufacturers.
• Automatic detection of the connected luminaires 125 W and 200 W.
• Lamp power constant controlled for steady light quality independent of line voltage and of the age of the bulb used.
• Flicker free operation by use of 200 Hz square wave current.
• Typical light ripple max. 3%.
• Dimming in range of 70 – 100% of nominal lamp power.
• With active line filter (PFC) for minimized apparent power and reduced disturbances of power supply network.
• Large range for input voltage 90 – 130 V~ / 180 – 250 V~ (auto-switching).
• Protection against line overvoltage and overtemperature.
• Lamp outlet protected against no-load conditions and short circuit.
• Solid aluminium construction with inside heat sinks.SPECIFICATIONS
• Lamp Power: 125 W / 200 W.
• Supply Voltage: 90 – 130 V~ / 180 – 250 V~ 50/60 Hz 1,N,PE.
• Line Power: 125 W: 150 VA (max.), 200 W: 240 VA (max.).
• Power Factor: cos φ ≈0.98.
• Dimensions: 130mm x 65mm x 240 mm.
• Weight: approx. 1.9 kg.SKU: n/a -
HMI lighting
B&S EB Ballast 2.5-4kW
Electronic ballast (universal) for use with 2500 W and 4000 W Metal Halide Lamps.
FEATURES
• Available for daylight lamps of all well-known manufacturers.
• Electronic detection of the used lamp types 2500 W and 4000 W.
• Lamp power constant controlled for steady light quality independent of line voltage and of the age of the bulb used.
• Flicker free operation by use of 75 Hz square wave current.
• Typical light ripple max. 3%.
• Additional “low-noise” modes (50 Hz / 60 Hz) to reduce the noise that might occur in the lamp head.
• Optionally equipped with 300 Hz operation mode for use with digital ‘high speed’ cameras.
• “Arc Control” to prevent unintended resonance arising inside bulbs of different designs.
• Dimming in range of 50 – 100% of nominal lamp power.
• With active line filter (PFC) for minimized apparent power and reduced disturbances of power supply network.
• Large range for input voltage 190 – 250 V~.
• Additional input voltage range 90 – 125 V~ as option (auto switching).
• Protection against line overvoltage and overtemperature.
• Lamp outlet protected against no-load conditions and short circuit.
• Solid aluminium construction with outside heat sinks.
• Very silent due to temperature regulated fans.
• Optionally equipped with digital remote control (DMX 512).SPECIFICATIONS
• Lamp Power: 2500 W / 4000 W.
• Supply Voltage: 90 – 125 V~ / 180 – 250 V~ 50 / 60 Hz 1,N,PE.
• Line Power: 4650 VA (max.).
• Power Factor: cos φ ≈ 0,98.
• Dimensions: 243 mm x 358 mm x 450 mm.
• Weight: approx. 20 kg.SKU: n/a -
HMI lighting
B&S EB Ballast 400-575W
Electronic ballast (universal) for use with 400 W and 575 W Metal Halide Lamps.
FEATURES
• Available for daylight lamps of all well-known manufacturers.
• Automatic detection of the connected luminaires 400 W and 575 W.
• Lamp power constant controlled for steady light quality independent of line voltage and of the age of the bulb used.
• Flicker free operation by use of 200 Hz square wave current.
• Typical light ripple max. 3%.
• Dimming in range of 50 – 100% of nominal lamp power.
• With active line filter (PFC) for minimized apparent power and reduced disturbances of power supply network.
• Large range for input voltage 90 – 130 V~ / 180 – 250 V~ (auto-switching).
• Protection against line overvoltage and overtemperature.
• Lamp outlet protected against no-load conditions and short circuit.
• Solid aluminium construction with inside heat sinks.
• Very silent (temperature regulated fan).
• Optionally equipped with digital remote control (DMX 512).SPECIFICATIONS
• Lamp Power: 400 W / 575 W.
• Supply Voltage: 90 – 130 V~ / 180 – 250 V~ 50/60 Hz 1,N,PE.
• Line Power: 400 W: 480 VA (max.), 575 W: 690 VA (max.)
• Power Factor: cos φ ≈0.98.
• Dimensions: 155 mm x 91mm x 270mm.
• Weight: approx. 3.2 kg.SKU: n/a -
HMI lighting
B&S EB Ballast 575W-1.2kW
Electronic ballast (universal) for use with 575 W and 1200 W Metal Halide Lamps.
FEATURES
• Available for daylight lamps of all well-known manufacturers.
• Automatic detection of the connected luminaires 575W and 1200 W.
• Lamp power constant controlled for steady light quality independent of line voltage and of the age of the bulb used.
• Flicker free operation by use of 75 Hz square wave current.
• Optionally equipped with 300 Hz operation mode for use with digital ‘high speed’ cameras.
• Typical light ripple max. 3%.
• Dimming in range of 50 – 100% of nominal lamp power.
• Large range for input voltage 90 – 125V~ / 180 – 250 V~ (auto – switching).
• Protection against line overvoltage and overtemperature.
• Lamp outlet protected against no-load conditions and short circuit.
• Solid aluminium construction with outside inside heat sinks.
• Very silent due to temperature regulated fan.
• Certification: BG Prüfzert No. 984702.
• Optionally equipped with digital remote control (DMX 512).SPECIFICATIONS
• Lamp Power: 575 / 1200 W.
• Supply Voltage: 90 – 125V~ / 180 – 250 V~ 50 / 60 Hz 1,N,PE.
• Line Power: 2290 VA (max.).
• Power Factor: cos φ ≈ 0.6.
• Dimensions: 200 mm x 150 mm x 300 mm.
• Weight: approx. 7 kg.SKU: n/a -
HMI lighting
B&S EB Ballast 6-12kW
Electronic ballast (universal) for use with 6000 W and 12000 W Metal Halide Lamps.
FEATURES
• Available for daylight lamps of all well-known manufacturers.
• Electronic detection of the used lamp types 6000 W and 12000 W.
• Lamp power constant controlled for steady light quality independent of line voltage and of the age of the bulb used.
• Flicker free operation by use of 75 Hz square wave current.
• Typical light ripple max. 3%.
• Additional `low-noise` modes (50 Hz / 60 Hz) to reduce the noise that might occur in the lamp head.
• Optionally equipped with 300 Hz operation mode for use with digital ‘high speed’ cameras.
• “Arc Control” to prevent unintended resonance arising inside bulbs of different designs.
• Dimming in range of 50 – 100% of nominal lamp power.
• With active line filter (PFC) for minimized apparent power and reduced disturbances of Power supply network.
• Large range for input voltage 180 – 250 V~.
• Additional input voltage range 90 – 125 V~ when used with 6000 W lamp.
• Protection against line overvoltage and overtemperature.
• Lamp outlet protected against no-load conditions and short circuit.
• Solid aluminium construction witch outside heat sinks.
• Very silent due to temperature regulated fans.
• Optionally equipped with digital remote control (DMX512).SPECIFICATIONS
• Lamp Power: 6000 W / 12000 W.
• Supply Voltage: 90 – 125 V~ / 180 – 250 V~ 50 / 60 Hz 1,N,PE.
• Line Power: 6 kW: 6900 VA (max.), 12 kW: 13200 VA (max.).
• Power Factor: cos φ ≈0.98.
• Dimensions: 263 mm x 498 mm x 506 mm.
• Weight: approx. 40 kg.SKU: n/a -
HMI lighting
B&S EB Ballast 6-9kW
Electronic ballast (universal) for use with 6000 W and 9000 W Metal Halide Lamps.
FEATURES
• Available for daylight lamps of all well-known manufacturers.
• In connection with suitable lampheads compensation of cable losses between ballast and lamphead. (CCL – Compensation of Cable Losses).
• Electronic detection of the used lamp types 6000 W and 9000 W.
• Lamp power constant controlled for steady light quality independent of line voltage and of the age of the bulb used.
• Flicker free operation by use of 75 Hz square wave current.
• Typical light ripple max. 3%.
• Additional `low-noise` modes (50 Hz / 60 Hz) to reduce the noise that might occur in the lamp head.
• Optionally equipped with 1000 Hz operation mode for use with digital ‘high speed’ cameras.
• “Arc Control” to prevent unintended resonance arising inside bulbs of different designs.
• Dimming in range of 50 – 100% of nominal lamp power.
• With active line filter (PFC) for minimized apparent power and reduced disturbances of power supply network.
• Large range for input voltage 180 – 250 V~.
• Protection against line overvoltage and overtemperature.
• Lamp outlet protected against no-load conditions and short circuit.
• Solid aluminium construction witch outside heat sinks.
• Very silent due to temperature regulated fans.
• Optionally equipped with digital remote control (DMX512).SPECIFICATIONS
• Lamp Power: 6000 W / 9000 W.
• Supply Voltage: 180 – 250 V~ 50 / 60 Hz 1,N,PE.
• Line Power: 6kW: 7600 VA (max.), 9kW: 11200 VA (max.).
• Power Factor: cos φ ≈ 0,98.
• Dimensions: 263 mm x358 mm x 450 mm.
• Weight: approx. 28 kg.SKU: n/a -
HMI lighting
B&S EBB Ballast 125-200W
Battery operated electronic ballast for use with 125 W and 200 W Metal Halide Lamps.
FEATURES
• Available for daylight lamps of all well-known manufacturers.
• Automatic detection of the connected luminaires 125 W and 200 W.
• Lamp power constant controlled for steady light quality.
• Flicker free operation by use of 150 Hz square wave current.
• Typical light ripple max. 3%.
• Dimming in range of 70 – 100% of nominal lamp power.
• Large range for input voltage 20 – 36 V DC.
• Protection against under- / overvoltage and reversed polarity.
• Lamp outlet protected against no-load conditions and short circuit.
• Solid aluminium construction.SPECIFICATIONS
• Lamp Power: 125 W / 200 W.
• Supply Voltage: 20 – 36 V DC.
• Line Power: 225 VA (max.).
• Dimensions: 130 mm x 70 mm x 158 mm.
• Weight: approx. 1.2 kg.SKU: n/a