B&S EB Ballast 6-12kW

B&S

Electronic ballast (universal) for use with 6000 W and 12000 W Metal Halide Lamps.

FEATURES
• Available for daylight lamps of all well-known manufacturers.
• Electronic detection of the used lamp types 6000 W and 12000 W.
• Lamp power constant controlled for steady light quality independent of line voltage and of the age of the bulb used.
• Flicker free operation by use of 75 Hz square wave current.
• Typical light ripple max. 3%.
• Additional `low-noise` modes (50 Hz / 60 Hz) to reduce the noise that might occur in the lamp head.
• Optionally equipped with 300 Hz operation mode for use with digital ‘high speed’ cameras.
• “Arc Control” to prevent unintended resonance arising inside bulbs of different designs.
• Dimming in range of 50 – 100% of nominal lamp power.
• With active line filter (PFC) for minimized apparent power and reduced disturbances of Power supply network.
• Large range for input voltage 180 – 250 V~.
• Additional input voltage range 90 – 125 V~ when used with 6000 W lamp.
• Protection against line overvoltage and overtemperature.
• Lamp outlet protected against no-load conditions and short circuit.
• Solid aluminium construction witch outside heat sinks.
• Very silent due to temperature regulated fans.
• Optionally equipped with digital remote control (DMX512).

SPECIFICATIONS
• Lamp Power: 6000 W / 12000 W.
• Supply Voltage: 90 – 125 V~ / 180 – 250 V~ 50 / 60 Hz 1,N,PE.
• Line Power: 6 kW: 6900 VA (max.), 12 kW: 13200 VA (max.).
• Power Factor: cos φ ≈0.98.
• Dimensions: 263 mm x 498 mm x 506 mm.
• Weight: approx. 40 kg.