-
×
Dynacore DS-260S Battery V-Lock Regular 14.8V 260Wh
1 × $559.00
Subtotal: $559.00
Battery adapters and DC couplers
Nanlite BH-FZ60V Battery handle V-Mount
Achieve long runtimes by powering the Forza 60 with a V-mount battery.
The Nanlite BH-FZ60V allows you to run a Forza 60 or Forza 60B from a V-Mount battery. The BH-FZ60V battery handle includes a 5.5mm DC-out cable to connect to the DC-in port on the Nanlite Forza 60 or Forza 60B, and a V-Mount buckle to mount the battery.
The Nanlite BH-FZ60V V-mount battery adaptor can be mounted on a light stand, and also includes a handle to enable the Forza 60 to be operated hand-held, ideal for run and gun filmmaking.
The Nanlite Forza 60 V-Mount battery handle is only compatible with 14.8V V-Mount batteries.
Forza 60 runtime from a 100Wh V-Mount battery is approximately 100 minutes.
$35.00
Related products
-
Battery adapters and DC couplers
Dynacore D-AS Gold Mount to V-Lock Adaptor
It may convert the Gold Plate to the V-Lock bracket. It offers a solution to allow the use of V-lock batteries on Gold mount cameras.
It can also be used as a charge adapter, enabling you to charge V-lock batteries on Gold mount chargers.
- Lock V-Mount battery to the V mount side of the D-AS, then the battery converts into AB mount.
- Lock Gold Mount side of D-AS with the camera, then the battery ready to work.
Weight: Approx 0.15Kg
Dimension: 124×97×40mmSKU: DYN-D-AS -
Battery adapters and DC couplers
Dynacore D-C Multi-Voltage Splitter V-Lock for camera rigs
Dynacore D-C Voltage splitter allows for connection of Multiple devices requiring different voltages on a camera rig.Multi-output adapter designed for DSLR cameras and accessories.
Output Voltage: 5V/7.2V/12V/15V(11V to 17V).
Built-in HDMI distributor, one standard signal input and two standard signal output.
V-Mount ENG batteries are required for the power.SKU: DYN-D-C Mount(With out HDMI) -
Battery adapters and DC couplers
Dynacore D-2BS-24 Converter V-Lock 14.8V input to 24V output
D-2BS/A-24 is a power station designed to utilise two 14.4 volt V-Lock batteries creating a power source outputing power for any device needing 24Volts, such as an LED panel.
It can supply up to 240Watt output (24V, 10A).
Designed to work with equal power batteries where a larger capacity is preferredLCD Display indicates Output Voltage
The unit has a Low Voltage Indicator LED to warn of potential problems shown here:
Color Red=Under/Over Voltage
Color Green=Good
Green Blinking=Battery LowOutput is via 3 Pin Female XLR Output
24V, 10A, 240W(Max)A Hexagon connector can be mounted to a stand using a super clamp or convi clamp.
SKU: DYN-D-2BS-24 -
Battery adapters and DC couplers
Dynacore D-TS Hot-Swap Adapter V-Lock
Dynacore D-TS Hot Swap system.
The D-TS is a Universal Hot-Swap battery mount, it allows the user to hot-swap a fresh battery while still operating equipment, so you can remove the depleted battery while the leaving the other battery connected so that there is no downtime.
Utilising the V-Lock mounting system, it can be attached to any portable device with an existing battery bracket.SKU: DYN-D-TS
