Exalux Connect RX-200N-REVERSE CRMX Receiver with RDM Subtotal: $760.00
Data and DMX distribution
TecArt Main/Backup Switcher Desktop DMX 2 in 1 out
The TecArt Main/Backup Switcher is primarily used for main and backup consoles. The unit automatically detects incoming DMX512, and automatically switches to the backup DMX stream as soon as the main input is disconnected or lost.
The TecArt Main/Backup Switcher can also be used to connect an external console to a live DMX network and will automatically switch over to take control.
The units are available with a choice of 3 or 5 pin connectors.
Related products
-
Data and DMX distribution
TecArt Merger Rack Mount DMX 2 in 8 out
The TecArt Merger is a 19” rack mount unit with 2 into 1 merging.
The DMX512 Merger combines data from two separate DMX512 inputs and provides a single merged data output on a HTP (Highest-Takes-Precedence) basis.
The unit can also have the merged output split across 8 opto-isolated outputs with separate drivers and power supplies.
The units are available with a choice of 3 or 5 pin connectors.
SKU: n/a -
Data and DMX distribution
TecArt Splitter DIN Rail RDM 4 way
The TecArt range of data splitters are available as DIN Rail mountable units.
Each output has a separate driver and opto-isolator to ensure the highest possible level of protection.
The unit is available as a standard DMX splitter or with the option of RDM.
RDM compliant device “ANSI/ESTA E1.20 Entertainment Technology – Remote Device Management over USITT DMX512”.
RDM or Remote Device Management is a protocol enhancement to DMX512 that allows Bi-directional communications between light fixtures and lighting consoles or RDM specific software over a standard DMX line.
DMXS4DR can be supplied with an external 12 – 48VDC power supply.
FEATURES
• DMX-512 In/Out/Thru.
• External Power Supply 12 – 48VDC.
• Terminal Strip Output and Input Connector.
• 2 Main indication LEDs.SPECIFICATIONS
• Input voltage: 12 – 48VDC.
• Power supply: External.
• Total power: 6W @ 24VDC.
• Dimension: 105mm (L) 85mm (W) 60mm (H).
• Mounting method: DIN Rail.
• DMX signal input: Terminal block.
• DMX signal output: Terminal block.
• Outputs: 4 Opto isolated.
• Temperature: 0 – 40 degree Celsius.SKU: n/a -
Data and DMX distribution
TecArt ArtNode 1 – 1 Universe
The ArtNode 1 is a Wi-Fi ArtNet to dual-purpose DMX node for architectural and entertainment lighting control applications.
FEATURES
• Multi mode: ArtNet to DMX, DMX to ArtNet.
• External power supply 9-24VDC (supplied separately).
• Robust housing.
• 2 main indication LEDs.SPECIFICATIONS
• Input Voltage: 9–24VDC.
• Power: 6VA (at 24VDC).
• Dimensions (mm): 117 L x 115 W x 53 H.
• Mounting Options: Desk-mount.
• DMX Input/Output: 5-pin XLR.
• Operating Temperature: 0 – +40°C.SKU: n/a -
-
Data and DMX distribution
TecArt USB to DMX Controller
The USB to DMX Controller allows the delivery of a DMX512 signal using third party computer-based lighting control software. It can also be used as an RDM addressing tool. The unit features a mini-USB connection and DMX input and output connectors via 5-pin male/female XLRs.
SKU: n/a
