COLR Duo is a wireless camera control bridge and 2 channel LUT box, with support for 2 independent 33pt 3D LUTs. COLR Duo integrates with Pomfort LiveGrade Pro, allowing DITs and colourists to give everyone the right look.Looks Mean EverythingDuring camera prep, on your cart, through colour timing or on camera, COLR enables directors, ACs, and DITs to see what they need. Multiple presets, combining CDL and 3D LUTs, can be stored on the device for quick conversion or custom looks at the touch of a button. For even more control over the look of your footage, COLR Duo offers two fully configurable SDI outputs, allowing you to display two independent 33pt 3D LUTs or even the same LUT across two monitors.Works with Pomfort LiveGradeCOLR is integrated with Pomfort LiveGrade Pro, giving you fine control over your LUTS using WiFi, Ethernet, or USB. Each LUT can be sent to COLR and applied to your image immediately from within the application.Monitor Calibration with SpectraCalWhether your production requires industry standard colour and gamma-accurate monitors or large consumer-grade screens, COLR is compatible. With SpectraCal’s CalMAN software, you can use the COLR and COLR Duo to calibrate a video display with a 10-bit 33pt 3D LUT. To learn more, visit the CalMAN Setup Guide.Connected SetWith COLR as a piece of the puzzle, the Connected Set initiative encourages seamless integration between all Teradek products, ultimately streamlining on and off-set workflows. This will support a consistent workflow throughout the production process, whether on-set with zero delay transmission, iPad monitoring, or for off-site dailies review and final colour grading. Stay ahead of the curve via free firmware upgrades and native integration with other Teradek products including Bolt, Cube, and LOKR.What’s In The Box:1 x Power Supply Unit 2-pin Connector to 18W AC Adapter(Int) – 1.8m Cable2 x SDI – BNC to BNC Cable2 x Antenna 2dBi WiFi 2.4/5.8 GHz1 x Mini-USB to USB – 45cm Cable1 x Quickstart Guide – COLR1 x Free Trial Code for Pomfort LiveGrade Pro1-Year WarrantyVideoVideo Inputs: 1 x SD/HD/3G-SDI (75 Ohm BNC)Video Outputs: 2 x SD/HD/3G-SDI (75 Ohm BNC)Color Sampling: SDI Input/Output: 10-bit YCrCb 4:2:2Supported Resolutions1080p 23.98/24/25/29.97/30/50/59.941080i 50/59.94/601080PsF 23.98/24/25720p 50/59.94/60480i59.94, 576i50Video Processing Test Pattern Generator Support: NoneVideo Format Conversion Support: NoneColor CorrectionCDL/1024 1D LUT (supports 10-bit color)33x33x33 3D LUT (supports 10-bit color)Supports 2 Video Outputs with 2 independent LUT Pipelines eachProtocol SupportNetwork Protocols: TCP/IP, UDP, HTTP, DHCPSoftware Or Platform Integration: Pomfort LiveGrade, SpectraCal CalMAN, and moreInputsAudio Input: Embedded SDI Audio InputOutputsAudio Output: Embedded SDI Audio OutputPhysicalDimensions: 50.8 x 25.4 x 101.6 mm (2” x 1” x 4” )Weight: 170.1gInterfacesHttp: WebUI for Configuration and ControlConfiguration Interfaces: OLED Display with joystick navigation buttonsSwitches: On/Off SwitchUsb Interface Functionality: Powered USB 2.0 host portNetworkEthernet: 10/100/1000BASE-T GigabitWireless WiFi: 2.4/5GHz 802.11 ac/a/b/g/n MiMORf Channel Selection: Auto with 3 modes: (2.4 or 5 Ghz), Auto (2.4 GHz only), Auto (5 Ghz only), Configurable to specific channelsPowerPower Input: 2 Pin Connector Power InputNominal Power Consumption: 8W, 7W(no WiFi)Auxiliary Power Input: 6-28V DC
Teradek COLR Duo
LUT Box (CDL 1D and 33-Point 3D LUTs). HDMI/SDI Cross-Converter. Wireless Controller for Ethernet Cameras. Supports 10-Bit Colour. Simultaneous HDMI and SDI Outputs. Integrates with Pomfort LiveGrade Pro. Supports Virtually Every Camera Signal. Compatible with Virtually All Monitors. Convert RAW & LOG Signals for Monitoring. Configuration Options: COLR COLR Duo.