Featured categories
Your Recently Viewed Products
Godox V860IIIN I-TTL Li-Ion Flash For Nikon
Power, speed, and integrated radio transmission make the Ving V860III TTL Li-Ion Flash Kit from Godox a hard-to-beat option for your Canon cameras. Fully compatible with TTL systems, the Ving V860III supports many advanced functions and features. Also, it features the Godox X wireless radio system, which provides both master and slave TTL functionality at a distance.
On top of this, the flash is powerful and versatile, featuring a guide number of 197′ at ISO 100 and 200mm along with a zoom range of 20-200mm. And this flash runs off a rechargeable lithium-ion battery pack that ensures fast recharge with a capacity of up to 480 full-power flashes.
For general operation, the Ving V860III features full bounce flash capabilities, including tilting and rotation left and right. As a TTL-compatible unit, this flash offers support for high-speed sync, flash exposure compensation, 1st and 2nd curtain sync, and much more. Additionally, it can function as an optical master or slave unit if needed.
What’s included
Rosco Mini Mix RGB Panel
Featuring True Rosco Color Inside
The patented MIX technology features a proprietary blend of six LEDs: Red + Lime + Green + Blue + Amber + White. This enables the MINI MIX fixture to generate a wide gamut of colors and create accurate Rosco gel matches that have been authenticated by Rosco’s color experts.
The MINI MIX allows filmmakers to add colored accent lighting wherever they need it. The ultra-thin, lightweight fixture features a powerful array of emitters that can produce virtually any color desired – anywhere its needed on set.
Set lighting technicians know that speed is of the essence when the cameras are rolling. There are no complicated menus on the MINI MIX. Simply choose between three different modes: White Mode, Gel Mode and Color Mode, then choose the color temperature, hue or Rosco gel color desired and adjust as-needed. All of these features are available using the fixture’s on-board controls, or via the myMIX app from your mobile device.
Jupio PowerVault III 2-Port USB & Wireless
This Jupio Powervault is ideal for powering up your smartphone, tablet and other digital device while you are on the go. This unit is tough yet lightweight, so you won’t mind storing in your backpack or handbag, to rely on in case of an emergency. This Jupio powerbank, with its 10,000 mAh capacity charges via USB-C, while USB-A and Micro USB outputs are also included, so you are giving a multitude of options for charging various devices.
Jupio PowerVault III 10,000mAh Ultra small Powerbank
Manfrotto Dolly Video for spiked feet with Cable guards 60kg Payload 127mm Wheels
Manfrotto Dolly Video for spiked feet with Cable guards 60kg Payload 127mm Wheels
Secure, heavy duty dolly for absolute stability. Designed to keep even the heaviest gear locked in place, this practical Video Dolly is an essential on set.
It’s built to last in durable aluminium. Plus each wheel has an individual brake. Perfect for when you need to keep everything safe and securely in place.
Despite its impressive heavy lifting capabilities, this dolly is neat and compact when folded away. Ideal for popping in your kit bag, transporting to outdoor shoots, or tidying away at the end of the day.
Compatible with 545B, 545GB, 546B and 546GB Manfrotto tripods.
Beamz Fuze 75S 75W Spot LED Moving Head DMX IR
Beamz Fuze 75S
The Beamz Fuze 75S Moving Head is a lightweight and compact spot moving head featuring a powerful 75W LED. Producing a sharp, light-coloured beam with customisable options and up to 8 colours using the colour and gobo wheels.
Also featuring is a 3-facet prism which splits the beam, to cover larger areas and create great effects. Operated via DMX, auto mode, sound active mode or master/slave mode. Making this the ideal moving head light for freedom and simplicity.
It’s the perfect fixture for lighting designers, DJs, bands, clubs, bars and installations where a small footprint and lightweight fixture is ideal.
RODE WS11 Deluxe Windshield Deadcat Fits VideoMicNTG
The WS11 is an easy-to-use high-performance windshield for the VideoMic NTG. Designed to for use in windy recording environments, the WS11 combines an open-cell foam surround with an outer layer of acoustically transparent artificial fur. A rubber grip system prevents any wind noise from entering the rear of the microphone pickup area.
Key Features:
High-performance windshield for RØDE VideoMic NTG
For use in high-wind conditions
Acoustically transparent synthetic fur
Easy to fit and remove
ProGrade Digital PGSD64GBCKNA 64GB SDXC UHS-II V90 Memory Card (Cobalt)
The UHS-II SDXC V90 Memory Card from ProGrade Digital features a storage capacity of up to 512GB per card and takes advantage of the UHS-II bus to support maximum read speeds of 300 MB/s and maximum write speeds of 250 MB/s. This SD memory card has also been designed with the V90 Video Speed Class rating, which guarantees minimum write speeds of at least 90 MB/s, allowing the SDXC card to be used in DSLRs, mirrorless cameras, camcorders, and digital cinema cameras that produce rich data streams, including 6K, 5K, 4K, UHD 4K, and high bit rate MPEG-4 video. It is also well-suited for raw photos and rapid-fire bursts.
SDXC UHS-II cards achieve their speed through an extra row of pins and while this card has been designed for cameras that are UHS-II / V90 compatible, it may be used in devices that do not support UHS-II / V90. However, bear in mind that this SD card will then default to your device’s speed class and bus rating, such as UHS-II and V60, which supports minimum write speeds of 60 MB/s, UHS-II and V30, which supports minimum write speeds of 30 MB/s, or UHS-I and U3, which also supports minimum write speeds of 30 MB/s. If your device does not support U3, this card is compatible with the U1 and Class 10 standards, each of which guarantee minimum write speeds of 10 MB/s.
Built for extreme conditions, ProGrade Digital’s UHS-II SDXC V90 Memory Card is able to withstand temperatures from -13 to 185°F, allowing you to take this card with you into extreme environments, such as snow and deserts. It is also shockproof and X-ray proof, and a built-in write protect switch helps to safeguard your content from being erased.
TecArt Dimmer VX Wall Mount 12 channel 2.5kW
The TecArt series of wall dimmers are an Australian designed and manufactured high-performance dimmer rack for the professional entertainment and production market. The unit features dimmer curves and full 512 channel start address. An LCD and keypad enable functionality such as soft-patch, internal memory scene and interactive test mode.
FEATURES
• Thermal-magnetic circuit breaker protection of outputs.
• DMX status LED and phase 1/2/3 LEDs.
• LED indicators for channel operation.
• LCD for DMX addressing and temperature.
• Dimmer curves and soft-patch.
• Simple test functions per channel built-in.
• DMX-512 control.
• High rise time toroidal chokes.
• Single or three phase operation.
• Internal quiet fan with microprocessor auto control.
• Easy to change Triacs/SSRs.
• Available with or without standard 10A outlets.
• Mains cable and plug available on request.
Rode WS12 – Windshield for Rode VideoMic GO II
The WS12 is a professional-grade windshield for the RØDE VideoMic GO II microphone. Featuring open cell foam covered by synthetic fur, it is designed to minimise wind noise and plosives when recording. Includes a wind seal made of synthetic rubber to block any unused sockets (USB-C or 3.5mm) on the microphone, preventing wind entering the rear of the microphone.
Key Features:
High-performance windshield for RØDE VideoMic GO II
For use in high-wind conditions
Acoustically transparent synthetic fur
Easy to fit and remove