Rode
Showing 1–15 of 235 results
-
Audio
RODE AI-1 USB Audio Interface
The RODE AI-1 Audio Interface is stacked with incredible technology to ensure recording on your computer is easy, versatile and sounds superb.
The AI-1’s single input is a NeutrikTM Combo Jack, which takes both a 3-pole XLR (common to most microphones) and a quarter-inch jack common to most electric instruments like guitar, bass et al. Layering tracks is as easy as plug in, set level and go.Not only does the AI-1 deliver crystal clear audio to your computer software, but headphones have never sounded sweeter thanks to the discrete studio-quality headphone output and level control.
SKU: ROD-AI1 -
Audio
RODE AI-Micro USB Compact Audio Interface
The RODE AI-Micro is an ultra-compact dual-channel USB Audio Interface. It provides you with the ability to record high-quality audio to a mobile device or computer anywhere. It features (2x) 3.5mm inputs that you can use with a wide variety of microphones and includes auto-sensing inputs that detect whether you are using a TRS or TRRS cable. The AI-Micro will automatically switch to the appropriate connection type to accommodate your input.
Weighing less than 20 grams, the AI-Micro is extremely compact and lightweight. Just add two lavalier microphones and you have a complete, studio-quality recording setup that fits in your pocket.
A very important feature is the high-quality headphone output that offers zero-latency audio monitoring and playback. The AI-Micro is versatile as it will connect to USB-A, USB-C and Lightning devices via its universal USB output. Furthermore, it is compatible with the RODE app suite that offers you expanded features and functionality such as on-the-go configuration, and broadcast-quality recording on any device. The expanded features and functionality are available on RODEÂ Central, RODE Connect and RODE Reporter.
Also included with the AI-Micro is (1x) SC21 – USB Type-C to Lightning cable, (1x) SC22 – USB Type-C to USB Type-C cable and (1x) SC23 – USB Type-C to USB Type-A cable. The AI-Micro is also compatible with the SmartLav+, Lavalier GO, RODELink Lav, SC15, SC16, SC17, SC18, SC19 and all VideoMics with 3.5mm output.
The AI-Micro will provide a frequency response between; 20Hz and 20kHz and offers a 24-bit Rate with both sampling rates of 44.100 and 48kHz. It offers (2x) preamps and (2x) Silmutaineous I/O recording so you can record 2x channels simultaneous. This is a USB bus-powered interface so it’s perfect for interviews in the field, on-the-go podcasting, and making video calls or live streaming at home.
Â
Also available is the Rode SmartLav+, Lavalier GO, and RODELink Lav.SKU: ROD-AIMICRO -
Audio
Rode Backpack
The RĂ˜DE Backpack is a custom-designed carry bag for the RĂ˜DECaster series, including the RĂ˜DECaster Pro or RĂ˜DECaster Pro II. Made from high-quality materials, including a soft, durable Alcantara® handle, ballistic nylon straps and water-resistant exterior, it is rugged and hard-wearing. It can accommodate a RĂ˜DECaster Pro or Pro II, plus microphones, studio arms and other accessories, as well as laptops up to 16 inches. Ergonomic adjustable shoulder straps with back and chest support ensure absolute comfort, with exterior pockets and compartments providing additional storage.
SKU: ROD-BACKPACK -
Audio
Rode Blimp Extension Long Shotgun Mic Extension Kit
The Rode Blimp Extension is an add-on component kit for the original RĂ˜DE Blimp windshield system. And allows you to use longer style shotgun microphones, including the RĂ˜DE NTG8 and shotgun with barrel length of up to 600mm.
The kit includes a 256mm blimp extension piece that connects directly to your exisiting Blimp system. Also includes are two sets of rigid silicone bands, an extra long DeadWombat fur windshield and furry brush.
Please note that the original RĂ˜DE Blimp Wind sheild is required to use this product. And it is not currently compatible with the 2014 RĂ˜DE Blimp.
SKU: ROD-BLIMPEXT -
Audio
Rode Blimp Windshield and Shock Mount
The Blimp is the ultimate windshield and shock mounting system for RĂ˜DE shotgun microphones, as well as any third-party shotgun microphone up to 325mm in length. It features a Rycote® Lyre® suspension system for superior isolation from handling noise, plus an ultra-lightweight and ergonomic handle. Housed inside the grip is a heavy-duty Mogami® cable that splits via a junction box to a flexible thin cable inside the Blimp, which minimise the transference of vibration to the microphone.Â
The Blimp attaches to any standard boompole with a 3/8-inch thread attachment at the base. The Universal Blimp Mount is available as an option to remove the handle when the Blimp is being used primarily on a boompole. The Dead Wombat windshield, caring brush and tail/patch cable are included.Â
Complete windshield and shock mount system for shotgun microphones
Rycote® Lyre® suspension system for superior isolation from handling noise
Ultra-lightweight design
Attaches to any standard boompole
10-year warranty (no registration required)SKU: ROD-BLIMP -
Audio
Rode BlimpMount Universal Blimp Mount
The Rode BlimpMount is an interchangeable mounting adaptor for the RĂ˜DE Blimp windshield & shock mounting system. Featuring a quick lock angle adjustment for perfect microphone positioning. And designed to suit either a standard microphone stand or boom pole. It allows for simple and lightweight mounting and use of the RODE Blimp. A must have for on-location broadcast, interviews, and other ENG recordings.
SKU: ROD-BLIMPMOUNT -
Audio
Rode BoomPole Bag Microphone Boom Carry Bag
The Rode BoomPole Bag is a professional neoprene carry bag for storing and transporting your microphone boom. Designed to fit most RĂ˜DE Boompoles, with a microphone and shock mount attached making set-up and pack down even easier. The high quality neoprene material helps to prevent dust and moisture from getting to the boom and microphone, while also providing padding for additional protection. This is a must have bag from any audio professional, or film crew with a boom microphone set-up.
SKU: ROD-BOOMPOLEBAG -
Audio
Rode BoomPole Clips Microphone Boom Cable Clips
The Rode BoomPole Clips is a pack of 5 handy cable management clips. Perfect for keeping your cables out of the way and free from knotting and tangling. Super easy to install with a large clip to suit your microphone boom pole, and a smaller clip for cables. The pack of 5 is perfect for larger boom where multiple clips may be needed to keep cables from drooping and knotting. These are a must have for any Boom operator looking for a fast and easy cable management solution, or alternative to Gaffa tape. Supplied in a pack of 5 clips.
SKU: ROD-BOOMPOLECLIPS -
Audio
Rode Boompole MICRO PRO Modular Microphone Boom
The Rode Boompole MICRO PRO is a high grade professional boom pole for location and over-head recording. Made from high grade Carbon-fibre for strength without the weight most metal boom’s have, even when fully assembled. Also featured is a modular design, adjustable up to 2.2m, or can even be used to extend the BoomPole PRO to reach over 3.7m. The boom pole comes with a 3/8″ thread that allows you to mount almost any microphone securely. And then swivel it in a range of directions that will allow you to easily change positions and follow your sound source. Perfect for a range of portable recording situations such as broadcasts, interviews, and on site recordings.
SKU: ROD-BOOMPOLEMICROP -
Audio
Rode Boompole MICRO Telescopic Microphone Boom Pole
The Rode Boompole MICRO is a high-grade professional boom pole for location and over-head recording. Machined from high grade aluminium for strength even when fully extended. Also featured is a telescopic design, adjustable from 0.84m to 2.00m with precision balance for easy use. The Boompole MICRO boom pole comes with a 3/8″ thread that allows you to mount almost any microphone securely. And then swivel it in a range of directions that will allow you to easily change positions and follow your sound source. Above all, this Rode Boom Pole is perfect for a range of portable recording situations such as broadcasts, interviews, and on-site recordings.
SKU: ROD-BOOMPOLEMICRO -
Audio
Rode Boompole MINI Telescopic Microphone Boom
The Rode Boompole MINI is a high grade professional boom pole for location and over-head recording. Machined from high grade aluminium for strength even when fully extended. Also featured is a telescopic design, adjustable from 0.84m to 2.05m with precision balance for easy use. The boom pole comes with a 3/8″ thread that allows you to mount almost any microphone securely. And then swivel it in a range of directions that will allow you to easily change positions and follow your sound source. Perfect for a range of portable recording situations such as broadcasts, interviews, and on site recordings.
SKU: ROD-BOOMPOLEMINI -
Audio
Rode Boompole PRO Telescopic Microphone Boom
The Rode Boompole PRO is a high-grade ultra-light professional boom pole for location and over-head recording. Made from high quality carbon fibre for strength without the weight that most metal boom’s have, even when fully extended. Also featured is a telescopic design, adjustable from 0.81m to 3.0m with precision balance for easy use. The boom pole comes with a 3/8″ thread that allows you to mount almost any microphone securely. And then swivel it in a range of directions that will allow you to easily change positions and follow your sound source. Perfect for a range of portable recording situations such as broadcasts, interviews, and on site recordings.
SKU: ROD-BOOMPOLEPRO -
Audio
Rode Boompole Telescopic Microphone Boom Pole
The Boompole is a precision-balanced professional boompole for location recording. Machined from high-grade, lightweight aluminium, the Boompole allows you to mount your microphone securely and swivel it in a range of directions to easily follow your sound source. It has a reach of 3.3 metres and weighs 980 grams.
Key Features:
Lightweight professional boompole
3m (10′) reach
Ultra-smooth extension and retraction system
Easy-to-use locking mechanismSKU: ROD-BOOMPOLE -
Audio
Rode Broadcaster Condenser Brodcast Microphone
The Broadcaster is a premium large-diaphragm, end-address condenser microphone designed to provide the ultimate performance for broadcast applications. Its frequency response has been tailored for radio broadcast, podcasting and voice-over applications, with a rich, controlled proximity effect that has made it an industry standard in radio stations the world over. It features an internal pop filter to control plosives and a switchable 75Hz high-pass filter.
Key Features:
Broadcast-quality condenser for podcasting, radio production and voice-overs
Internal pop filter
High-pass filter
On-air’ indicator LED
10-year warrantySKU: ROD-BROADCASTER -
Audio accessories
Rode Charge Case for Wireless GO II
The Charge Case for Wireless GO II is a convenient solution to securely storing, transporting and recharging your wireless kit on the road or at home. It can fit two transmitters and a receiver and top up all three units with an extra two full charges, giving you up to 21 hours of use. With a durable exterior and an innovative zip-up design, the Charge Case will not only keep your Wireless GO II topped up, it will also ensure it’s kept safe and secure whether you’re at home or between shoots.
Key Features:
Custom charging case for the Wireless GO II
Fits three Wireless GO II units – two transmitters and a receiver
Provides an additional two recharges for up to 21 hours of use
Rugged protective case with a zip to keep your Wireless GO II kit safe and secure
Charging status LEDSKU: ROD-WIGOIICHARGINGCASE