Global Shutter Full-Frame VV Sensor
Lightweight and Compact DSMC3 Design
Locking Canon RF Lens Mount
Global Vision with Extended Highlights
Phantom Track for Ghost Frame, Remapping
Supports up to 8K120, 800 MB/s Video
17+ Stops of Dynamic Range
Right-Side Assistant’s User Interface
REDCODE Raw HQ, MQ, LQ | ProRes Options
USB-C and Dual 12G-SDI Ports
Part of the Mini Rigging System, this 500mm 9.Solutions 3/8″ Rod Set consists of two aluminum 3/8″ rods each with 3/8″ thread at each of their ends. The rods can be fastened together via optional long nuts. The rods can also be mounted to other pieces of grip gear using their 3/8″-16 thread.
The Shure KSM32 is an embossed single-diaphragm, side-address, cardioid condenser microphone for highly critical studio recording and live sound productions. The Shure KSM32 offers an extended frequency response for an open, natural-sounding reproduction of the original sound source.
The REDVOLT NANO-V battery is a small lightweight power solution for the KOMODO-X, weighing in at only 0.63lbs (288g), ideal for gimbals, drones, and other setups where form factor and weight matter. The batteries dimensions (66 x 88 x 44mm) ensure a completely flat surface on the top and sides of the camera allowing for various combinations of cages and plates to be attached uninterrupted.
Featuring a 49Wh capacity with a maximum output of 6A the battery can power the KOMODO-X and DSMC3 RED Touch 7.0 inch LCD for short durations when wanting to shoot as light weight as possible.
REDVOLT NANO-V was designed in partnership with Core SWX and is compatible with most cameras/modules that accept V-Lock batteries. For issues or troubleshooting, please visit https://coreswx.supportsystem.com.
Matthews C Clamps are available in 4″, 6″, 8″, 10″ and 12″ with or without 5/8″ mounting pins or Junior Receivers. Each clamp has a steel channel welded to both sides of the opening for better and safer locking. Clamps made for mounting Baby fixtures have two separate pins at different angles so that the light fixtures may fit with minimal clearance. Junior Receivers are made in two fixed versions. Horizontal and Vertical and a Universal Mounting Junior Receiver which can be used in any one of eight different positions.
Matthews C Clamps are manufactured from premium drop forged steel. It should be noted however, that since the Matthews clamp is an adaptation of a standard C Clamp, there is no effective warranty on the part.
Nanlite Parabolic Softbox Grid 120cm 
Canon R5CBODY EOS R5 C Cinema Camera 
Chauvet DJ 4BARQUADILS Complete ILS Wash Lighting Solution 
