Featured categories
Your Recently Viewed Products
Tilta Single-sided cinema follow focus(with safety case)
This single-sided follow focus has a 1:1 hand wheel-to-gear ratio for extremely accurate focus pulls.
It attaches to both 15mm LWS and 19mm rod supports by snapping onto the rods.
This allows you to adjust, mount and remove it without the need to remove other accessories that are also mounted onto the rods such as matte boxes and lens supports.
The gear is attached to a swivel that allows you to rotate it against the lens for a tight fit.
You can also slide the whole unit from side-to-side, allowing you to easily adjust to fit any size of lens.
Laserworld EL-900RGB 4 Head RGB Laser Effect 900mW
Laserworld EL-900RGB
The Laserworld EL-900RGB is a complete laser show in one device. It has been designed to especially meet the demands of mobile DJs and smaller nightclubs to fill the whole room and overcome the limits of rather narrow scan angles.
The EL-900RGB is an RGB show laser system with a total overall output power of up to 900mW and fast step motors with 3-8 kpps. it has four beam apertures with an individual pair of step motors.
Many of the built-in patterns have been programmed in a way that the four laser outlets play well together and fill the whole room, like a multi-unit laser show. The curved shape of the unit allows for a very large horizontal deflection angle, so the laser can cover the whole room.
The Laserworld EL-900RGB can be run in sound-to-light, stand-alone or DMX mode. It can display many different colors, including white!
The red diode laser module with a wavelength of 650nm, the green DPSS laser module with a wavelength of 532nm and the royal-blue laser module with a wavelength of 450nm ensure beautiful colors and bright beams. The beam has 3 mm diameter at the aperture and a divergence of about 2 mrad. About 50 preset basic patterns, like layers, tunnels, fences, waves etc. are included. Many of them do not output all the same way on all four laser outlets, but some of the x-axis mirrored or modified in a way, that the laser display looks nice and homogenous.
The sensitivity of the integrated microphone can be adjusted for the sound-to-light signal perception.