Featured categories
Your Recently Viewed Products
Rycote Hyper Cardioid Shotgun Microphone 22cm, Long Directional Mono Mic 3 Pin XLR Connection

Rycote Hyper Cardioid Shotgun Microphone 22cm, Long Directional Mono Mic 3 Pin XLR Connection
The Rycote HC-22 is a hypercardioid shotgun microphone designed for a wide range of applications in cinema, TV, ENG, live broadcast, sound design, studio and field recording.
The HC-22 combines a highly directional polar pattern with extremely low self-noise. This provides solid off-axis rejection and isolation with a precise sound quality to match, making the HC-22 a great all around mic for recording environments which may require a more focused recording approach.
FEATURES
Capsule:
• Professional broadcast quality and individually fine-tuned back electret capsule
Preamp:
• Compact design
• Ultra low noise circuitry
• Sophisticated RF shielding
• Low power consumption
Connector:
• Gold-plated Neutrik XLR connector
RF-Protection:
• Active in-line filtering
• Fine-tuned mechanical RF shielding
• Thoroughly tested against digital wireless systems and walkie talkies
Materials:
• Preamp made from non-corrosive machined brass – low impedance to ensure best possible and longest lasting RF shielding
• Capsule / Interference tube made from lightweight machined aluminium
• Weight balanced to help keep center of gravity further back to provide improved handling when using Rycote Lyre shock mounts and slip-on wind protection
PRODUCT CODE: RYC079002
SPECIFICATIONS:
Frequency Range: 50 Hz – 20 kHz
Self Noise: 8.5 dB A (+/- 2 dB)
Polar Pattern: Hyper cardioid
Capsule Type: Back Electret Condenser
Output Sensitivity: 48.0 mV/Pa (-26.3 dB)
Max. Output Voltage: 5 V (if relative load is < 2kΩ)
Output Impedance: 100 Ω
Min. Recommended Load: 1 kΩ
Signal / Noise Ratio: 85 dB typical (@ 1 kHz/Pa A-weighted)
CMRR (@ 1 kHz): > 60 dB
Max. Cable Length: 100 m
Powering: P-48
Powering Valid Range: 48-24V (Max SPL reduced at 24V)
Current Consumption: ~ 3.0 mA
Max. SPL: 133 dB SPL (@ 1 kHz (1.0% THD typical)
RFI Shield: Yes
Connector: XLR-3M
Weight: 100 g
Colour: Matte Black w/ Red Accent
Dimensions: Length 221mm x Diameter 19mm
COMPATIBLE RYCOTE WINDSHIELDS
• 18cm SGM Foam
• 18cm Classic Softie
• 18cm Short Fur Softie
• 18cm Super Softie
• Nano Shield Kit NS4-DB
• Cyclone Windshield, Medium
• Modular Windshield Kit 3
Haida 77mm PROII Variable ND Filter
The Haida 77mm PROII Variable ND Filter is a solid variable neutral density filter that provides an exposure reduction of 2 to 5 stops. The 0.6 to 1.5 density creates a darkening of the entire image, allowing you to video or photograph with a wider aperture or slower shutter speed than normally required. The degree of density is easily controlled by rotating the front filter ring, helping you to predetermine the additional exposure length required. By slowing your exposure time or increasing your aperture, you are able to control depth of field and convey movement more easily. For easier, repeatable control over density settings, the front ring is also visually demarcated with dots that represent different density values.
Matthews Matthellini Ctr Jw 2″ Black
Provides strong, solid gripping of round, square, or rectangular tubing and many other common and irregular shapes. Features ergonomic handle design and reinforced jaws. Available with 2″ or 3″ Center Jaw and 2″ or 6″ End Jaw. The Center Jaw has a fixed jaw mounted at the base of the Baby Pin portion of the shaft providing strong support for the pin. The End Jaw has the fixed jaw mounted at the end of the threaded portion of the shaft.