Visual Departures Steadybag Jr Model 3 Camera Support 225g Blue
Steadybag is a high-tech update of the old-fashioned beanbag. Steadybag virtually eliminates camera shake without the need for time-consuming tripod setup. Use it for rock-solid shooting on car hoods, fenceposts, window ledges, rocks or branches.
$47.50
Related products
-
Stabilisers
Tilta Armor man 3.0 Overhead Configuration Gimbal Ring Adapter Clamp(Pair)
If you have a ring-based gimbal, the Overhead Configuration Gimbal Ring Adapter Clamps allow for an easy quick release solution to attach and detach your gimbal to the Armor Man 3.0’s mechanical arms when in the overhead operating mode. The clamps attach to the left and right sides of the top of the gimbal ring and then after the Overhead Configuration Cable Pulleys are attached to each of the Armor Man’s arms, the operator can simply use the carabiners of the extendable bungee cables to attach to the gimbal to then start operating. When you want to detach the gimbal, simply release the carabiners off of the clamps.
SKU: TIL-ARM-T03-ORAC -
Stabilisers
Cinekinetic Fasty Straps
5′ long polyester seat belt webbing Cinesaddle Fasty Straps are designed to work with the Cinesaddle Stirrups or Anchors to secure your Cinesaddle to a moving or stationary platform. The Fasty Straps feature a buckle that allows you to secure the strap from loosening once you have cinched it tight.
You loop the Fasty strap around a Stirrup (not included) and put it under tension. Or when working with a Cinesaddle Anchor (not included), you can thread the end of the Anchor through the Fasty Strap’s buckle to hold it fast.
SKU: CKN-FASTYSTRAPS -
Stabilisers
Manfrotto MVGEXT Extension in carbon fibre for Manfrotto Gimbals
The Carbon Fiber extension is a 257mm/10 inches pole that can be attached to the base of your gimbal.
It is a compact, portable and lightweight accessory that improves your shooting experience, increasing flexibility and versatility. Quick and easy to attach, it allows you to explore a wider range of perspectives and creative angles.
It is compatible with most of the gimbals available on the market, thanks to ¼-inch threaded studs and threaded holes on the top and bottom of the handle.SKU: MAN-MVGEXT -
Stabilisers
Tilta Armor man 3.0 Arm (L)
This shock-absorbing stabilized left arm for the Armor Man 3.0 attaches to the back of the Armor Man 3.0 vest when in the normal operating mode and can also be attached to the top of the vest when operating in the overhead configuration. When engaged, the arm has two adjustable tension knobs to allow you to adjust for the weight of your gimbal/camera rig as well as your preferred operating style (whether you want the arms bowed out away from your body or tight and compact to your body).
You can attach a variety of gimbal supports to the end of the arm to allow you to use the Armorman with any kind of 3-axis gimbal, whether a top bar-based gimbal, a ring-based gimbal, or even if you want to use the Nucleus-M handles on your gimbal. Each of these supports attach to the arm on a sliding dovetail-based system so that you can adjust them for maximum comfort based on your operating preferences.
SKU: TIL-ARM-T03-A-L -
Stabilisers
Tilta Armor man 3.0 Support Cup(pair)
If you have a top bar-based gimbal, the Armor Man 3.0 Support Cups allow for an easy solution to attach and detach your gimbal to the Armor Man 3.0’s mechanical arms while they are in the lower operating position. When you want to attach the Armor Man to the gimbal, simply fit the side arms of the gimbal into the support cups and then re-grab the arms like normal to start operating. When you want to stop operating, simply dock the gimbal, grab onto the support cups and detach them from the handles.
SKU: TIL-ARM-T03-SC
