Inovativ Lite Kit With DigiBase

RoboCup is a utility patented caddy that securely holds two drinks, tools, fishing poles, drum sticks, phone, keys and much more by clamping instantly to both round and flat surfaces up to 2″ in size.

HOW TO USE: To open (1) hold the RoboCup with the jaws facing away from you and (2) using both hands squeeze the cups inwards using your chest muscles and (3) clamp onto a surface using both jaws equally.

REMOVABLE END CAPS: The two bottom end caps are removable for access to clean the RoboCup and for long objects including two fishing poles. Updated in mid-2017, these end caps now have threading with a perfect fit.

REINFORCED DESIGN: Ribs were added to reinforce the clamping jaws in mid-2017 making them 55% more durable. The poly material continues to have UV-inhibitors added for longevity against the sun.

HARDWARE: The hardware and two powerful springs are stainless steel for rust prevention.

CAUTION: The spring-loaded jaws are very powerful requiring proper use and caution. Do not put hot liquids in the RoboCup just in case the RoboCup gets knocked off.

Designed for large drinks up to a 3.75”/95mm in diameter including cups, mugs, glasses, koozies, tumblers and more. Perfect for Nalgene, Hydroflask, Yeti, RTIC, Contigo, Thermos and Camelbak.

Attach using the provided two straps and tighten snugly to secure. Remove all existing straps from the RoboCup before attaching the Plus.

For a more permanent attachment (not provided), use a stainless steel hose clamp for the top strap but be sure to not over-tighten and use a plastic cable-tie for the bottom strap.

The position of the Plus can be swiveled around the RoboCup for ideal placement. Tall wall height (4”/101mm) holds drinks securely and the top rim has a wavy design allowing convenient access for shorter drinks.

Double the RoboCup drink capacity by using two RoboCup Plus accessories. 1 included.

Built with a robust thick wall design with UV-stabilizers added for longevity. Backed by a “no hassle” 3 year warranty. Made in USA.

The Mag Tripod Holder can hold two full size Tripods, a rubber bungee secures Tripods in place.

The built-in 5/8in Baby Pin can accept anything with a 5/8in receiver, such as an Umbrella Holder, 9in Monitor Tray or a Mag Dual Video Bracket. The Tripod Holder can be flipped 180 degrees so it lays down flat when Nose is folded.