Hasselblad Battery Charging Hub Set
2-Bay Charger with USB Type-C Connector
LED Indicators Show Status & Capacity
For Current X System 3400mAh Batteries
Charges First Gen X System Batteries
Audible Chime Announces Charge Complete
Includes Power Supply
$329.00
The Hasselblad Battery Charging Hub for X System supports the current 3400mAh batteries. It charges a single battery in two hours and 18 minutes and two cells charge in two hours and 48 minutes. The charging hub is also compatible with first-generation X System 3200mAh batteries that will charge in approximately three hours. When the cells are fully charged, the hub will announce an audible chime. Additionally, the charger supplies power to the batteries from power banks through its USB Type-C connector or via its included power supply. During the charging process, the front LEDs indicate the status and capacity of the batteries.
Related products
-
Battery adapters and DC couplers
Dynacore D-HB26 Safety Adapter V-Lock 26V
Dynacore D-HB26 is a safety adaptor for 26 Volt V-Lock products
This adaptor allows the wiring of your 26 volt batteries to not work if accidentally installed on a 14.4 volt system.
Installing a 26 volt battery accidentally on a 14.4 Volt product will potentially overpower these items causing failure. Using these adaptors mean that you are protected from this happening. Please contact us for further details.
SKU: DYN-D-HB26 -
Battery adapters and DC couplers
Dynacore D-2BS-24 Converter V-Lock 14.8V input to 24V output
D-2BS/A-24 is a power station designed to utilise two 14.4 volt V-Lock batteries creating a power source outputing power for any device needing 24Volts, such as an LED panel.
It can supply up to 240Watt output (24V, 10A).
Designed to work with equal power batteries where a larger capacity is preferredLCD Display indicates Output Voltage
The unit has a Low Voltage Indicator LED to warn of potential problems shown here:
Color Red=Under/Over Voltage
Color Green=Good
Green Blinking=Battery LowOutput is via 3 Pin Female XLR Output
24V, 10A, 240W(Max)A Hexagon connector can be mounted to a stand using a super clamp or convi clamp.
SKU: DYN-D-2BS-24 -
-
Battery adapters and DC couplers
Aputure Power Station V-Lock 2-Bay
The Aputure 2-Bay Battery Power Station is a battery inverter that uses two industry-standard 14.4V/14.8V Gold or V Mount batteries and outputs a 48V DC current via 3-pin XLR. With this power station, users can bring the flexibility of battery power to any 48V lighting fixture, such as the Nova P300c or Amaran 100 & 200 series of LED lights.
SKU: APU-25.2BAYPWST -
