Showing 16–30 of 67 results
The 5/8″ Rod Set consists of two 5/8″ (16mm) diameter rods made from high grade aluminum.
The rods have 3/8″-16 female threads on each end. Increase the rod’s length by connecting additional rods with 9.Solutions 5/8″ Rod Connectors. Additionally, 9.Solutions 3/8″ Rods can also be threaded into the ends of the 5/8″ rods, making it easy to adapt from one riggingsize standard to another.
The 5/8″ Rod Set consists of two 5/8″ (16mm) diameter rods made from high grade aluminum.
The rods have 3/8″-16 female threads on each end. Increase the rod’s length by connecting additional rods with 9.Solutions 5/8″ Rod Connectors. Additionally, 9.Solutions 3/8″ Rods can also be threaded into the ends of the 5/8″ rods, making it easy to adapt from one riggingsize standard to another.
The Action Camera Flat Clamp is perfect for mounting equipment onto cloth or straps. It has a 1/4″-20 threaded hole on both sides which can be used to attach accessories directly onto it, such as the Action Camera L-bracket or Quick Mount Angle Joint.
The Action Camera L-bracket makes a great companion to GoPro cameras. It can be used in a variety of different configurations to accommodate 90 degree positioning. An included 1/4″-20 thumb screw allows for attachment to any 1/4″-20 female threaded equipment. The 9.Solutions thumb screw has the same size head as the GoPro thumb screw, so any GoPro wrench can be used tighten it.
The four-pack of Adhesive Tape from 9.Solutions provides additional mounts for the separately available Quick Mount Receiver to Adhesive Plate. Use these adhesive tapes as part of the modular Quick Mount action-camera support system.
Designed to carry equipment weighing up to 33 lb on its ball joint, the Angled El-Bo Arm from 9.Solutions has a compression-handle locking mechanism that allows you to secure gear with one hand, as you would with a pistol grip.
The Barracuda Clamp is the real super clamp that delivers more versatility and innovation than any other clamp on the market. Whether round, square, or flat, the Barracuda Clamp will open wider and bite with more force than the competition. Its unique mouth design allows it to clamp onto different shaped objects without any additional pieces, and the clamping pressure is spread more equally than the competitors. It also features a true snap-in socket that locks down when a pin is inserted, allowing you to hang equipment with one hand.
Highlights:
– No friction in clamping mechanism when opening and closing
– Stronger clamping force than the competition
– Fits with all super clamp adapter pieces and studs
– Snap-in socket locks down on 5/8″ pins when inserted
– 0-60mm mouth opening
– Kipp lever for tight spaces
The 9.SOLUTIONS Handlebar Kit for Small Cameras allows you to attach a compact and lightweight camera to bicycle/motorcycle handlebars and roll bars measuring 1.02 to 1.18″ in diameter. The kit includes a handlebar mount that utilizes the 9.SOLUTIONS Quick Mount Receiver interface. For attaching your camera, a 1/4″-20 Quick Mount is included. The handlebar mount fastens to bars via two Allen screws, which can be tightened using the included Multi-Tool or any 3/16″ Allen wrench. The Multi-Tool also functions as a wrench for GoPro-style thumbscrews and can even be used as a bottle opener.
The multi purpose 9.Solutions Cheese plate differentiates itself from most other cheese plates by offering the possibility to build your rigging out from its side tapped mounting blocks.
Each of its three corner positioned blocks are tapped with 3/8″-16 side and bottom holes.
It also features an elongated 10x36mm center slot for accurate positioning of ball heads.
All 10mm through plate holes and four of the 1/4″-20 tapped holes are spaced with the industry standard 1 inch center distances.
The three included 3/8″ rod clamps can be repositioned in any 3/8″ tapped hole.
Due to its spring loaded clamping, this cold shoe clamp enables one to one-handedly mount shoe fitted equipment very easily. Its finger screw serves both as a push knob for opening the clamp and for tightening down the clamping securely.
It fits the standard shoe sizes of 18, 20 and 22mm.
The Cold Shoe Clamp is tapped with 1/4″-20 and 3/8″-16 holes on the back side
Like the El-Bo Arm the Double El-Bo Arm from 9.Solutions has a locking mechanism that makes it easy to secure gear with one hand. Unlike the El-Bo arm the Double El-Bo is jointed at its center for greater flexibility in placement. It has a 5/8″ pin with a female 3/8″ thread at one end and a 3/8″ male thread at the other.
The long, 660mm Double Joint Arm from 9.Solutions has ball joints at each end with 5/8″ pins tapped with a 3/8″-16 thread. The pins and threads offer a wide means of support using optional clamps. They are loosened and tightened by a central clamping lever. Uses include support of scrims, signs, and video monitors.
The medium, 460mm Double Joint Arm from 9.Solutions has ball joints at each end with 5/8″ pins tapped with a 3/8″-16 thread. The pins and threads offer a wide means of support using optional clamps. They are loosened and tightened by a central clamping lever. Uses include support of scrims, signs, and video monitors.
The Double Joint Arm has ball joints on both ends that are locked into position by a single-point tightening mechanism. Each ball joint has a 5/8″ pin with a 3/8″-16 female thread, making it easy to mount and position lights, cameras, monitors, or a wide variety of equipment at any angle.
The short, 360mm Double Joint Arm from 9.Solutions has ball joints at each end with 5/8″ pins tapped with a 3/8″-16 thread. The pins and threads offer a wide means of support using optional clamps. They are loosened and tightened by a central clamping lever. Uses include support of scrims, signs, and video monitors.
LumenRadio Aurora CRMX Transmitter/Receiver Single Universe DMX/RDM, sACN/Art-Net, CRMX and W-DMX 
Chauvet DJ D-FI XLR-TX - Wireless DMX Transmitter 
