Kupo
Showing 1–15 of 17 results
-
-
Arms Grip/Extension, Boom and Tripod Mount
Kupo 241B Black 40″ Extension Grip Arm with hex baby pin
The KUPO Black 40″ Extension Grip Arm with hex baby pin handle is a 2 1/2″ grip head mounted on the end of a 40″ piece of steel tubing 5/8″ (16mm) in diameter. The Hex pin end prevents heavy light fixtures from twisting under their own weight.
SKU: KUP-KPKCP241B -
-
Stands Combo and Overhead
Kupo 542MB Black 3.5m Master Cine Stand
- 2 risers, 3 sections of diameters 45mm, 40mm, 35mm
- Leg diameter of 25mm x 25mm, with 1 levelling leg
- Chrome plated steel construction
- Folded dimensions: 143cm
- Fully extended height: 350cm
- Minimum working height: 139cm
- Product weight: 11.1kg
- Footprint diameter: 140cm
- Maximum safe working load: 40kg
SKU: KUP-KP542MB -
Stands C-Stand
Kupo CT-40MK C-Stand Master Kit Silver 40″ with quick release base
The Kupo CT-40MK 40″ Silver Master C-Stand Kit with Quick Release “Turtle Base” is a steel lighting support kit with 2 risers and 3 sections that extends to a maximum height of 295cm. Century Stands or “C-Stands”, are the most common type of grip equipment used by the filmmaking industry due to their strength and versatility. This C-stand is so versatile that it can be used on its own, or in combination with the supplied grip head and grip arm. With studio flash modifiers getting bigger and bigger, the need to properly support them in a varying range of positions is increasing. When you buy a Kupo Master C-Stand, you buy it for life.
SKU: KUP-CT-40MK -
Stands C-Stand
Kupo CT-40MKB C-Stand Master Kit Black 40″ with quick release base
The Kupo CT-40MKB 40″ Black Master C-Stand Kit with Quick Release “Turtle Base” is a sturdy steel lighting support kit with 2 risers and 3 sections that extends to a maximum height of 295cm. Century Stands or “C-Stands”, are used extensively throughout the filmmaking industry due to their strength and versatility. This C-stand can be used on its own, or in combination with the supplied grip head and grip arm. With studio flash modifiers getting bigger and bigger, the need to properly support them in a varying range of positions is increasing. The flat black finish on this Kupo 40″ Master C-Stand reduces the chance of the stand reflecting back onto your subject. This makes your set-up easier and reduces post-production time.
SKU: KUP-CT-40MKB -
-
Clamps Super and Spring
Kupo KCP-710B Convi G Clamp with Adjustable handle – Black
Kupo Super Clamp
Length: 123.8 mm
Width: 90.8 mm
Height: 55.8 mm
Weight: 440g
Primary Material: Black Lightweight Alloy
Secondary Material: Stainless Steel Bolts
Maximum Load: 20 kg
Minimum Jaw Diameter: 5 mm
Maximum Jaw Diameter: 51 mmSKU: KUP-KPKCP710B -
Adaptors, Spigots and Studs
Kupo KS-017 Brass 16mm spigot with 3/8″ male and 1/4″ male thread
The KUPO KS-017 Brass 16mm Spigot with 3/8″ Male and 1/4″ male thread is a universal double-sided, baby 5/8″ (16mm) stud with 1/4″-20 male thread on one side and a 3/8″-16 thread on the other. The stud is round and will fit into any 5/8″ (16mm) receiver.
SKU: KUP-KPKS017 -
Adaptors, Spigots and Studs
Kupo KS-024 1/4” Camera Mounting Plate with 5/8″ Stud’
This Kupo KS-024 head mounting plate with Stud is an aluminum disc with a 5/8″ stud on 1 side and a standard 1/4″-20 mounting screw on the other. It’s ideal for attaching a tripod head, DSLR camera, field recorder or any other accessory with a female 1/4″-20 thread to a Kupo Convi Clamp or any other piece of grip equipment with a 5/8″ receiver.
SKU: KUP-KPKS024 -
Adaptors, Spigots and Studs
Kupo KS-097 Baby Ballhead Adapter with 3/8” male thread and 5/8” receiver
Adaptors, Spigots and StudsKupo KS-097 Baby Ballhead Adapter with 3/8” male thread and 5/8” receiver
The Kupo KS-097 adaptor allows you to mount a Tripod Ballhead onto a Light Stand or C-Stand. It secures onto any 5/8″ spigot, as found on all our light stands and C-Stands
The KS-097 adaptor can also be used to mount a tripod ball head very low. Use this ballhead adaptor to mount a ballhead onto the base of a C-Stand.
The outer diameter of the KS-097 is 28mm, (1-1/8″) to fit into a junior receiver, enabling this adaptor to also mount onto larger light stands and booms.
SKU: KUP-KPKS097