Showing 196–210 of 220 results
NNHDT121LA
Clip a Pavotube to a light stand.
This affordable LED tube mount will allow you to secure the pavotube to a light stand, and position them vertically or horizontally.
Features a 16mm baby receiver to mount onto a stand or a boom.
Clip a Pavotube to a light stand.
The Nanlite HD-T12+BH is an affordable Pavotubtube mount. It will allow you to secure the pavotube to a light stand, and swivel them on the mini ballhead to any angle. This clip is compatible with the Pavotube II 6C, 15C, and 30C.
Features a 16mm baby receiver to mount onto a stand or a boom.
Tube Holder Ball Head Yoke with Gooseneck for 2 tubes.
This unit will allow you to clip up to 2 Pavotube LED tubes to a light stand, and position them vertically or horizontally.
Features a 16mm baby receiver to mount onto a stand or a boom.
Tube Holder Ball Head Yoke with Gooseneck for 4 tubes.
This unit will allow you to clip up to 4 Pavotube LED tubes to a light stand, and position them vertically or horizontally.
Features a 16mm baby receiver to mount onto a stand or a boom.
Tube Holder Ball Head Yoke with Swivel Pin for 1 tube.
The Nanlite HD-T12-1-BHP Pavotube holder unit will allow you to clip in a Pavotube 15C/15X or 30C/30X and easily adjust it into any angle and position. The robust ballhead mechanism is easy to adjust and fine-tune.
Features a steel 16mm baby pin to mount into a grip head.
Connect Pavotubes together to sync setting adjustments.
Using this Nanlite Pavotube cable allows you to control multiple Pavotubes from a single lead Pavotube.
Compatible with 2ft and 4ft Pavotubes.
This coiled cable expands from 37 to 75cm.
Eggcrate Grid for Tube Light 59.5cm x 9 cm.
Designed specifically for the 2-foot Nanlite Pavotube 15C, these barn doors add the ability to creatively control the light direction of the pavotube.
The included Eggcrate adds further light control to the barn doors.
Eggcrate Grid for Tube Light 97cm x 9 cm.
Designed specifically for the 4-foot Nanlite Pavotube 30C, these barn doors add the ability to creatively control the light direction of the pavotube.
The included Eggcrate adds further light control to the barn doors.
The Nanlite CB-DMX-USBC-1/3 control cable adds DMX/RDM Control to the Pavotube T8-7X and the Pavobulb.
When using the DMX/RDM control cable you can create more sophisticated animation effects. The cable has a Type-C connector at one end, and three DMX connectors to simultaneously connect to 3 x Pavotube T8 7X.
RGBW LED with 30W output and Nebula C4 light engine
Wide CCT range: 2700K–7500K with ±150 G/M adjustment
High output: 14,150 lux at 0.5m (5600K, bare)
14 built-in effects plus 8 group effects via NANLINK App
Lightweight design at just 420g
Quick control with onboard knob, buttons, and 1.28” display
Power via PD 3.0 USB-C or NP-F batteries
Includes barndoor, diffuser, and carrying bag
Mountable via 1/4”-20 thread for use with tripods or stands
Supports firmware updates via NANLINK App
RGBW LED with 30W output and Nebula C4 light engine
Wide CCT range: 2700K–7500K with ±150 G/M adjustment
High output: 14,150 lux at 0.5m (5600K, bare)
14 built-in effects plus 8 group effects via NANLINK App
Lightweight design at just 420g
Quick control with onboard knob, buttons, and 1.28” display
Power via PD 3.0 USB-C or NP-F batteries
Includes barndoor, diffuser, and carrying bag
Mountable via 1/4”-20 thread for use with tripods or stands
Supports firmware updates via NANLINK App
Setwear Glove Stealth Medium Black 
Tenacious P743BL Paper Tape Photographic Masking Matt Black 48mm x 55m 
Blackmagic Design ATEM Mini Pro 
