Tilta
Showing 1–15 of 351 results
-
Camera rig attachments, brackets and components
Tilta 10″ lightweight dovetail plate Black version
0 out of 5(0)Similar to other dovetails, this can be mounted to most support systems like tripod heads or camera cranes via 1/4″-20 and 3/8″-16 screws.
The Tilta Dovetail features a unique track in which camera systems using Tilta Baseplates can slide and lock onto in various positions.
This allows you greater flexibility when balancing your camera system on a tripod head for precise and easy operating.
The featured safety pin provides additional security which is especially important when extra assurance is needed such as when rigging overhead.
When paired with our Dovetail Shoulder Rig, this plate allows you to quickly swap between locked off and shoulder mounted handheld shots.
The Tilta Standard Dovetail is a lightweight, low profile option that perfectly complements our Tiltaing and Tilta Standard Baseplates.
Available in Black or Gray.
Dimensions: 10 x 2.5 x 0.5 inches
Weight: 1 lb
Net Weight: 0.42 lbs
Material: Aluminum-alloy, stainless steel
Color: Black, GraySKU: TIL-TT-C16-BLK$273.00 -
Camera rig attachments, brackets and components
Tilta 100g Counterweight
0 out of 5(0)This 100g counterweight can be used in conjunction with the Side Arm Counterweight Clamp and/or the Quick Release Baseplate Counterweight Adapter to provide additional weight if needed when balancing your camera setup on the gimbal.
SKU: TIL-TGA-CW-100$16.00 -
Camera rig attachments, brackets and components
Tilta 12″ dovetail plate
0 out of 5(0)This sleek, rugged Arri standard dovetail allows you to mount your camera rig easily and comfortably using any compatible Arri standard baseplate. Baseplate stopper toggles are on either end so that you can slide your camera onto the plate however you’d like.
SKU: TIL-TT-C07$610.00 -
Camera rig attachments, brackets and components
Tilta 14500 Battery Charger Set
0 out of 5(0)This 14500 Battery Charger Set allows you to charge a single 14500 rechargeable battery (included) via USB power.
The charger features two different modes for charging with 0.25A or 0.5A.
SKU: TIL-BCS-14500-K2$38.00 -
Lens filter systems and matte boxes
Tilta 14500 Power Supply for Tilta Mirage Motor
0 out of 5(0)WARNING: Do not power the motor via USB-C while this Power Supply is attached.
The 14500 Power Supply for Tilta Mirage Motor attaches directly to the motor and allows you to power it via a single 14500 battery.
This is the perfect lightweight solution for powering the Wireless Motor for Tilta Mirage.
NOTE: The Motor will draw a small amount of power from this unit when powered off.
Please remove the battery from this unit when not in use.
SKU: TIL-MB-TM-PS$30.00 -
Camera rig attachments, brackets and components
Tilta 15mm dovetail shoulder mount system(new version)
Camera rig attachments, brackets and componentsTilta 15mm dovetail shoulder mount system(new version)
0 out of 5(0)THE 15MM VERSION IS COMPATIBLE WITH TILTA STANDARD LWS BASEPLATES
This Dovetail Based Shoulder Rig is the perfect solution for shoulder mounted handheld camerawork with camera systems that utilize Tilta Standard Baseplates.
Simply slide the camera onto the Tilta Standard dovetail plate and adjust it to the desired position before locking it down.
The shoulder pad can also be independently adjusted allowing for perfect balance of the camera system on your shoulder.
The adjustable, extendable arms allow you to adjust the angle and length of the hand grips for maximum operating comfort.
When used in combination with our Tilta Standard Dovetail, you are easily able to quickly transition from from a tripod or other support system to shoulder mounted handheld.SKU: TIL-TT-0506-A15$1,468.00 -
Camera rig attachments, brackets and components
Tilta 15mm lens support PRO
0 out of 5(0)This lens support gives you stability for your lens while being compatible with 15mm LWS rods.
The center support screw can be finger-tightened to the “Y” support bracket and then raised and lowered to allow you to tightly secure your lens.
The center 3/8″-16 screw can also be connected directly to your lens and can be adapted to 1/4″-20 via the 3/8″-16 to 1/4″-20 Adapter.
It also features an open design to how it clamps onto the rods so that you can easily attach and detach it without the need to remove other accessories.
Weight: 0.3 lbs
Color: Gunmetal-gray
Material: Aluminum-alloy, stainless steel
Rod System: 15mm LWSSKU: TIL-LS-T05$175.00 -
Camera rig attachments, brackets and components
Tilta 15mm lens supporter(15mm rod adaptor)
0 out of 5(0)This lens support gives you stability for your lens while being compatible with 15mm LWS rods.
The center adjustable knob allows you to raise and lower the support to tightly secure your lens.
It also features an open design to how it clamps onto the rods so that you can easily attach and detach it without the need to remove other accessories.
SKU: TIL-LS-T03$100.00 -
Camera rig attachments, brackets and components
Tilta 15mm lightweight baseplate for RED WEAPON
0 out of 5(0)This 15mm LWS baseplate is used in conjunction with the Red DSMC2 line of Tilta camera cages. It’s set up to easily attach to the Tilta Standard Lightweight Dovetail Plate and has a very low profile to make your camera setup as compact as possible.
SKU: TIL-BS-T01$380.00 -
Camera rig attachments, brackets and components
Tilta 15mm LWS Baseplate for RED V-RAPTOR
0 out of 5(0)This 15mm LWS Baseplate adds 15mm rod support to your RED V-RAPTOR which allows you to utilize rod based accessories such as matte boxes and follow focus systems.
This baseplate natively connects to our Full Camera Cage for RED V-RAPTOR and features a quick release connection that allows you to easily detach your camera from this baseplate when needed.
The built in safety release pin helps lock the cage in place and provides additional security to ensure your camera stays securely connected to this baseplate.
Underneath this baseplate you’ll find a receiver that natively connects to our Tilta Standard Dovetails or ARRI Standard Dovetails via our optional Tilta Standard to Arri Standard Multi-Functional Baseplate.
This baseplate can also mount to third party quick release plates via 1/4″-20 and 3/8″-16 threads.SKU: TIL-ESR-T08-BSP$258.00 -
Camera rig attachments, brackets and components
Tilta 15mm LWS Rod Adapter for MB-T12 Matte Box
0 out of 5(0)This 15mm LWS rod adapter allows you to attach your MB-T12 4×5.65 Carbon Fiber Matte Box (Clamp-on) to a 15mm LWS rod system to add additional safety to how the matte box is mounted.
Included with the MB-T12 matte box.
Weight: 0.148 lbs
Color: Black
Material: Aluminum-alloy, stainless steel
Rod System: 15mm LWSSKU: TIL-MB-T12-RA$90.00 -
Camera rig attachments, brackets and components
Tilta 15mm LWS Support for Tilta Mirage
0 out of 5(0)The 15mm LWS Support for Tilta Mirage allows you to mount the Matte Box to your camera system via two 15mm rods.
This is the perfect solution for adding some additional security when weight is less of a concern or when using lenses that do not support the clamp on functionality of the Mirage.
SKU: TIL-MB-T16-LS$55.00 -
Camera rig attachments, brackets and components
Tilta 15mm Rod Holder to 1/4″-20 Adapter (Front Mounted) – Black
Camera rig attachments, brackets and componentsTilta 15mm Rod Holder to 1/4″-20 Adapter (Front Mounted) – Black
0 out of 5(0)This 15mm Rod Holder is the perfect option for mounting rod based accessories to your camera system via one of our Half or Full Camera Cages.
This specific variation mounts via a 1/4″-20 screw and utilizes a locating pin which helps prevent the rod from rotating when using accessories such as wireless follow focus motors.
This design allows this Rod Holder to be mounted to the front of a cage, allowing the rod to sit closer to the lens than it normally could via traditional baseplates.
This makes it the perfect solution for mounting single rod based follow focus systems to compact lenses.SKU: TIL-TA-15RH-1420F-B$19.00 -
Camera rig attachments, brackets and components
Tilta 15mm Rod Holder to 1/4″-20 Adapter (Side Mounted) – Black
Camera rig attachments, brackets and componentsTilta 15mm Rod Holder to 1/4″-20 Adapter (Side Mounted) – Black
0 out of 5(0)This 15mm Rod Holder is the perfect option for mounting rod based accessories to your camera system via one of our Half or Full Camera Cages.
This specific variation mounts via a 1/4″-20 screw and utilizes a locating pin which helps prevent the rod from rotating when using accessories such as wireless follow focus motors.
This design allows this Rod Holder to be mounted to the side of a cage as well as the top in both parallel and perpendicular configurations. (in relation to the width of the camera body)
This makes it the perfect solution for mounting follow focus systems and single rod matte boxes without traditional baseplates as well as Electronic Viewfinders on camera systems that don’t feature native EVF support.SKU: TIL-TA-15RH-1420S-B$19.00
Showing 1–15 of 351 results