Bulky items
Showing 271–285 of 799 results
-
HMI lighting
K5600 Alpha HMI Fresnel 6/9kW Head Kit
The extremely compact and lightweight Alpha 9K: the go-to fixture for location shooting.
The Alpha 9K is the only 9K Fresnel on the market. Whether it’s creating a soft Fresnel look or a hard shadow, the Alpha 9K gives users the tool they need to get the job done. Additionally, the specially designed air ventilation system allows heat to be dissipated efficiently. In fact, it runs so “cool,” it can be illuminated in the straight down position.
Extremely Lightweight
“Open-Eye” HMI fixture converting to a very small Fresnel by a unique Drop-In Flood Fresnel Lens reducing overall fixture weightReflector and Chariot
Revolutionary Quartz Composite Reflector – 15% brighter than standard aluminum reflectorsCooling
Combination of high-efficiency small Quartz reflector with computer- designed structural air vents provides efficient convection cooling in any operating position – even pointing straight downLamp Suspension
Quick and safe release of the lamp via a simple latch on the ceramic G38 socketVersatility
Alpha 9K Spacelight Accessory can be used with industry standard spacelight accessories to create the brightest daylight spacelight on the marketSKU: K56-K9KALPHA -
Enlargers and copy stands
Kaiser Fototechnik 5301 Foldable Copy Stand RS 2 CP
Portable camera stand.
- Non-reflective matt grey baseboard with printed fine grid and cm/inch scale.
- Mattblack anodised aluminum section tube column with cm/inch scale.
- Hand-cranked height adjustment by friction drive in plastic bearings.
- With horizontally adjustable camera arm to change the distance to the column, moves approx. 7 cm (2.7 in.) back and forth. 1/4? mounting thread.
- Column folds down on baseboard.?
- Baseboard (WxHxD):?approx. 400 x 25 x 420 mm (15.7 x 1 x 16.5 in.)
- Column height:?approx.?60 cm (23.6 in.)
- Maximum load:?1.5 kg (3.3 lbs)?
- Comes in strong carrying case 67 x?47 x 23 cm (24.4 x 22.8 x 8.3 in.) with handle and shoulder strap.
Accessories
SKU: KFO-KF-5301 -
Enlargers and copy stands
Kaiser Fototechnik 5304 Copy Stand RS 2 NCP
Portable copy stand with RB 218N HF Lighting Unit (5464).
- Non-reflective matt grey baseboard with printed fine grid and cm/inch scale.
- Matt-black anodised aluminium section tube column with cm/inch scale.
- Hand-cranked height adjustment by friction drive in plastic bearings.
- With horizontally adjustable camera arm to change the distance to the column, moves approx. 7 cm (2.7 in.) back and forth. 1/4? mounting thread.
- Column folds down on baseboard.
- Baseboard (WxHxD): approx. 400 x 25 x 420 mm (15.7 x 1 x 16.5 in.)
- Column height: approx. 60 cm (23.6 in.)
- Maximum load: 1.5 kg (3.3 lbs)
- RB 218N HF Lighting unit with an all-electronic high-frequency operating system (approx. 40 kHz) for immediate ignition and flicker-free operation.
- Two small light banks, each equipped with a cold light fluorescent lamp, tiltable and adjustable in height.
- Angle of vertical arms adjustable by lock joint.
- Mounted with strong die-cast clamp bases.
- Clamp width 48 mm (1.9 in.)
- Lamps: 2 x 18 watt
- Color temperature: 5400 K
- CRI: 90-100
- Replacement lamp: 5458
- Comes in strong carrying case 67 x?47 x?23 cm (26.4 x?18.5 x 9.0 in.) with handle and shoulder strap.
Accessories
?
SKU: KFO-KF-5304 -
Enlargers and copy stands
Kaiser Fototechnik 5360 “reprokid” Copy Stand
Super-compact camera stand for small, lightweight cameras (digital compacts, CCD cameras, etc.).
- Non-reflective, matt-black baseboard.
- Column with cm/inch scale.
- Height-adjustable camera arm. 1/4? mounting thread.
- Baseboard (WxHxD): 32 x 1.9 x 38 cm (12.6 x 0.7 x 15 in.)
- Column height:?59 cm (23.2 in.)
- Max. load:?1 kg (2.2 lbs.)
- Includes lighting unit with two E 27 screw-in mounts for lamps up to 250 Watt (supplied without lamps).
- Power cables:?2 x 2.5 m (8 ft. 2 in.). with cord switch.
Suitable lamp:
3128: Reflector lamp 150 W, 3200 K, 1 piece?
5361:?”reprokid” Camera Stand
Same as 5360, but without lighting unit.Accessories
?
SKU: KFO-KF-5360 -
Enlargers and copy stands
Kaiser Fototechnik 5361 Copy Stand
Super-compact camera stand for small, lightweight cameras (APS, digital compacts, CCD cameras, etc.).
- Non-reflective, matt-black baseboard.
- Column with cm/inch scale. Height-adjustable camera arm. 1/4″ mounting thread.
Specs
- Baseboard (WxHxD): 32 x 1.9 x 38 cm (12.6 x 0.7 x 15 in.)
- Column height: 59 cm (23.2 in.)
- Max. load: 1 kg (2.2 lbs.)
SKU: KFO-KF-5361 -
Enlargers and copy stands
Kaiser Fototechnik 5411 Copy Stand RS 2 XA
Non-reflective matt grey baseboard with printed fine grid and cm/inch scale.
- Matt-black anodised aluminum section tube column with cm/inch scale.
- Hand-cranked height adjustment by friction drive in plastic bearings.
- Column can be mounted rotated 180?
- With horizontally adjustable camera arm to change the distance to the column, moves approx. 7 cm (2.7 in.) back and forth. 1/4″ mounting thread.
- Baseboard (WxHxD): approx. 400 x 25 x 500 mm (15.7 x 1 x 19.7 in.)
- Column height: approx. 76 cm (30 in.)
- Maximum load: 1.5 kg (3.3 lbs)
SKU: KFO-KF-5411 -
Enlargers and copy stands
Kaiser Fototechnik 5507 “microdrive” Copy Stand
- Non-reflecting matt gray base board with printed fine grid.
- Feet adjustable in height.
- Spirit level in column base.
- Extra-wide and extremely vibration-resistant column of dull black anodized aluminium tubing with cm and inch scales.
- Hand crank-operated height adjustment by friction drive on plastic bearings.
- Weight compensation by roll-off spring mechanism.
- Column can be mounted rotated 180?.
Specs
- Base board: approx. 450 x 500 x 28 mm (17.7 x 19.7 x 1.1 in.)
Column height: approx. 1000 mm (39.4 in.)
Downloads
SKU: KFO-KF-5507 -
Enlargers and copy stands
Kaiser Fototechnik 5510 Copy Stand RS 1
Non-reflecting matt gray base board with printed fine grid.
- Feet adjustable in height. Spirit level in column base.
- Extra-wide and extremely vibration-resistant column of dull black anodized aluminium tubing with cm and inch scales.
- Hand crank-operated height adjustment by friction drive on plastic bearings. Weight compensation by roll-off spring mechanism.
- Column can be mounted rotated 180?.
Specs
- Base board: approx. 450 x 500 x 28 mm (17.7 x 19.7 x 1.1 in.)
- Column height: approx. 1000 mm (39.4 in.)
SKU: KFO-KF-5510 -
Enlargers and copy stands
Kaiser Fototechnik 5511 Copy Stand RS 1
Non-reflecting matt gray base board with printed fine grid. Feet adjustable in height. Spirit level in column base. Extra-wide and extremely vibration-resistant column of dull black anodized aluminium tubing with cm and inch scales. Hand crank-operated height adjustment by friction drive on plastic bearings. Weight compensation by roll-off spring mechanism. Column can be mounted rotated 180?.
Base board: approx. 450 x 500 x 28 mm (17.7 x 19.7 x 1.1 in.)
Column height: approx. 1000 mm (39.4 in.)5511: RS 1 Camera Stand?
with RT 1 copy and titling arm with two camera mounting points for portrait and landscape formats.
Mounting the camera on the inside of the camera carrier for landscape format produces images which are not upside-down. This is very convenient for comic, animation and stop-motion films.
A parallel guide makes the camera platform longitudinally adjustable, and it can be locked in any position. The entire copy and titling arm is tiltable to allow for reproduction of vertical subjects.
With interchangeable ??/1/8? connecting thread.
Maximum load: 3 kg.5510: RS 1 Camera Stand?
with RA 1 camera arm with interchangeable threaded bush 1/4?/ 3/8? and camera adjustment device.
Maximum load: 4 kg (8.8 lbs.)5507: RS 1 “microdrive” Camera Stand?
Same as RS 1 Camera Stand (5510), but with hand-cranked, rack-and-pinion height adjustment, additionally counter-balanced by a built-in scroll spring. Additional fine drive with 1:6 step-down transmission for super-fine adjustment. Locking screw prevents inadvertent changing of the adjusted heightSubject to errors and technical changes.
SKU: KFO-KF-5511 -
Enlargers and copy stands
Kaiser Fototechnik 5512 Copy Stand RSX
Big non-reflecting matt grey baseplate with printed grid, cm and inch scale.
- Feet adjustable in height.
- Spirit level in column base.
- Especially wide and low-vibration column made of matt black anodized aluminium tubing with cm and inch scale.
- Height adjustment with hand crank and rack with extra weight compensation by integrated coil spring.
- Blocking screw to stop accidental changing of height.
- Column can be mounted rotated 180?.
With RTX camera arm (5522):
- Camera carrier turns ? 90? and can be blocked in every position. With spirit level for fine adjustment.
- Camera mount horizontally adjustable via parallel guides with fine adjustment.
- Camera can be mounted on the inside or outside of the camera carrier. Mounting the camera on the inside of the camera carrier for landscape format produces images which are not upside-down. This is very convenient for comic, animation and stop-motion films.
- The entire copy and titling arm is tiltable to allow for reproductions of vertical subjects.
- With interchangeable 1/4″/ 3/8″ connecting thread.
- Base board (WxHxD): approx. 600 x 500 x 32 mm (23.6 x 19.7 x 1.3 in.)
- Height of column: approx. 1.20 m (4 ft.)
- Maximum load: 3.5 kg (7.7 lbs.)
SKU: KFO-KF-5512 -
Enlargers and copy stands
Kaiser Fototechnik 5513 Copy Stand RS 10
Large non-reflecting, matt grey baseboard with a printed fine grid and cm/inch scale.
- Height-adjustable feet. Spirit level integrated into the base.
- Especially wide, virtually vibration-free column made of matt black anodised aluminium section tube with cm/inch scale.
- Hand-cranked, rack-and-pinion height adjustment, additionally counter-balanced by a built-in scroll spring.
- Locking screw prevents inadvertent changing of the adjusted height.
- Column can be mounted rotated 180?.
- RTP camera arm (5524) with precision, parallel-guided horizontal adjustment over approx. 8 cm (3.1 in.). Reversible mounting thread 1/4″/ 3/8″.
- Including dust cover.
- Baseboard (WxHxD): approx. 600 x 32 x 500 mm (23.6 x 1.3 x 19.7 in.)
- Column height: approx. 1 m (39 in.)
- Maximum load: 4 kg (8.8 lbs.)
SKU: KFO-KF-5513 -
Enlargers and copy stands
Kaiser Fototechnik 5600 RSD mot Copy Stand
- Column made of special aluminium multi-section tubing, matt black anodised, with cm and inch scales.
- Camera carrier made of aluminum section, can be horizontally adjusted over approx. 25 cm (9.8 in.) with rack-and-pinion parallel guides.
- Left hand/right hand operation, two blocking screws prevent inadvertent changing of the adjusted position.
- Camera mounting plate tiltable by ? 90?. Connecting screw horizontally adjustable. Height adjustment motorized, with two speeds.
- Cable remote control.
- Constant adjustment speed, independent of load.
- Automatic end switch by magnet sensor.
- Large non-reflecting matt grey base plate with printed grid, cm and inch scales.
- Feet adjustable in height.
- Spirit level.
??????? Specifications:
- Base plate (WxHxD): 900 x 38 x 730 mm (35.4 x 1.5 x 28.7 in.)
- Height of column: 1.80 m (5.9 ft.)
- Column cross section: 105 x 74 mm (4.1 x 2.9 in.)
- Loading capacity: 8 kg (17.6 lbs.)
- Camera mounting plate: 130 x 78 mm (5.1 x 3.1 in.)
- Reversing mounting thread: 1/4? / 3/8? changeable
Subject to errors and technical changes
SKU: KFO-KF-5600 -
Enlargers and copy stands
Kaiser Fototechnik 5602 RSD Copy Stand
Column made of special aluminum multisection tubing, matt black anodized, with cm and inch scales.
- Camera carrier made of aluminum section, can be horizontally adjusted over approx. 16 cm (6.3 in.) with rack-and-pinion parallel guides.
- Left hand/right hand operation, two blocking screws prevent inadvertent changing of the adjusted position.
- Camera mounting plate tiltable by ? 90?.
- Connecting screw horizontally adjustable.
- Height adjustment with hand crank (5602) or motorized (5603).
- Large non-reflecting matt grey base plate with printed grid, cm and inch scales.
- Feet adjustable in height.
- Spirit level.
Specifications
- Base plate (WxHxD): 680 x 38 x 570 mm (26.8 x 1.5 x 22.4 in.)
- Height of column: 1.20 m (3.9 ft.)
- Column cross section: 105 x 74 mm (4.1 x 2.9 in.)
- Loading capacity: 8 kg (17.6 lbs.)
- Camera mounting plate: 130 x 78 mm (5.1 x 3.1 in.)
- Reversing mounting thread: 1/4? / 3/8? changeable
5602 RSD Copy Stand: Hand-cranked, rack-and-pinion height adjustment, additionally counter-balanced by a built-in coil spring. Blocking screw to stop accidental changing of height.
5603 RSD mot Copy Stand:?Height adjustment motorized, with two speeds. Cable remote control. Constant adjustment speed, independent of load. Automatic end switch by photo sensors.
Recommended lighting systems for the RD System copy stands are RB 5070 DX2 and the copy lighting units of the R1 system
Accessories
Code no: 5602
Subject to errors and technical changes.
SKU: KFO-KF-5602 -
Enlargers and copy stands
Kaiser Fototechnik 5603 RSD mot Copy Stand
- Column made of special aluminum multisection tubing, matt black anodized, with cm and inch scales.
- Camera carrier made of aluminum section, can be horizontally adjusted over approx. 16 cm (6.3 in.) with rack-and-pinion parallel guides.
- Left hand/right hand operation, two blocking screws prevent inadvertent changing of the adjusted position.
- Camera mounting plate tiltable by ? 90?.
- Connecting screw horizontally adjustable.
- Height adjustment with hand crank (5602) or motorized (5603).
- Large non-reflecting matt grey base plate with printed grid, cm and inch scales.
- Feet adjustable in height.
- Spirit level.
Specifications
- Base plate (WxHxD): 680 x 38 x 570 mm (26.8 x 1.5 x 22.4 in.)
- Height of column: 1.20 m (3.9 ft.)
- Column cross section: 105 x 74 mm (4.1 x 2.9 in.)
- Loading capacity: 8 kg (17.6 lbs.)
- Camera mounting plate: 130 x 78 mm (5.1 x 3.1 in.)
- Reversing mounting thread: 1/4? / 3/8? changeable
5602 RSD Copy Stand: Hand-cranked, rack-and-pinion height adjustment, additionally counter-balanced by a built-in coil spring. Blocking screw to stop accidental changing of height.
5603 RSD mot Copy Stand:?Height adjustment motorized, with two speeds. Cable remote control. Constant adjustment speed, independent of load. Automatic end switch by magnet sensor.
Recommended lighting systems for the RD System copy stands are RB 5070 DX2 and the copy lighting units of the R1 system
Accessories
Code no: 5603
Subject to errors and technical changes.
SKU: KFO-KF-5603 -
Enlargers and copy stands
Kaiser Fototechnik 5710 RSP 2motion Copy Stand
Heavy-duty copy stand for analogue and digital image capturing work with two-level motor-driven adjustment.
- Accepts originals up to 100 x 80 cm (39.4 x 31.5 in.).
- Extremely sturdy column, made of a multi-section special extrusion, black anodized, with printed cm and inch scales.
- Column foot made of double strutted steel tube.
- Steel socket for bolting the column.
- Four levelling feet.
- Detachable base board made of 4 mm aluminium with stabilizing substructure.
- Camera carrier made of die-cast aluminium, horizontally adjustable by parallel guides with friction drive and hand cranks for right-hand/left-hand operation.
- Two blocking screws.
- Camera mounting plate tiltable by +/- 90?. Built-in spirit level.
- Camera carrier and base board with individual motorized height adjustment.
- Two travel speeds, independent of load.
- Self-limiting worm gear: any height position is exactly held.
- Automatic end switch by magnet sensor.
- Anti-collision device.
- Cable remote control.
Specifications:
- Total height: 227 cm (89.4 in.)
- Maximum working span: 160 cm (63 in.)
- Column cross section: 120 x 80 mm (4.7 x 3.1 in.)
- Maximum load on camera carrier: 10 kg (22 lbs.)
- Maximum load on base board: 15 kg (33 lbs.)
- Base board: 100 x 80 cm (39.4 x 31.5 in.)
- Camera platform: 13 x 13 cm (5.1 x 5.1 in.)
- Connecting thread (interchangeable): 1/4? / 3/8?
- Required floor space (WxD) : 100 x 126 cm (39.4 x 49.6 in.)
Accessories
Subject to errors and technical changes.
SKU: KFO-KF-5710
