Featured categories
Your Recently Viewed Products
Epson T55J1 Photo Black Ink 700ml Cartridge for P6070, 7070, 8070 & 9070

Epson T55J1 Photo Black Ink 700ml Cartridge for P6070, 7070, 8070 & 9070
Beamz Tiger E 7R Moving Head Beam DMX
Beamz Tiger E 7R
The Beamz Tiger E 7R moving head has a very bright output due to the use of the 7R 230W high-intensity discharge bulb. The moving head is equipped with a colour, frost, gobo and prism effect wheel for ultimate control. The gobo wheel has 17 different gobos + open, together with the motorized 16-facet rotating prism it can create a wide range of light effects. The colour wheel has 14 colours + open. This Tiger 7R moving head works both in DMX or stand-alone mode. When operating in DMX mode you have complete control with 16 DMX channels. Among its features are a mechanical shutter and adjustable speed strobe, frost lens, rotation prism, motorized focus and mechanical dimmer.
Event Lighting PAR19X12L LED Par 19x12W RGBWAU w/ IR Remote
LiteGear LiteMat 1 Snapgrid 40 with Storage Bag
Easy as 1,2,3. TRP/DoPchoice SNAPGRIDS mount on the front of a PolySkirt with diffusion to control the spread of the light. Taking full advantage of DoPchoice’s patented instant set-up and self-tightening internal SNAPFRAMES, a SNAPGRID practically snaps out of its compact pouch ready to easily attach to your LiteMat.
Laserworld EL-230RGB Coloured Laser Display System
Laserworld EL-230RGB
The Laserworld EL-230RGB is a compact RGB laser system with a total output power of up to 230 mW. Designed for mobile entertainers, private parties and smaller venues. The laser comes with a safety key and is fitted with an interlock for added safety. Supplied with 50 built-in patterns including; layers, tunnels, fences, waves etc. that can be operated via the stand-alone and sound-to-light modes. For the sound-to-light mode the sensitivity of the integrated adjustable microphone can be adjusted. For more dynamic effects the laser can be controlled via DMX
Powering the laser projector are 3 primary modules; Red, Green, and Blue. The red diode laser module with a wavelength of 650 nm, the green DPSS laser module with a wavelength of 532nm, the royal-blue laser module with a wavelenght of 445 nm ensure beautiful colors and brightness. The beams have a diameter of about 4 mm and a beam divergence of about 1 mrad and the projector offers high-speed stepper motors with 2-5 kpps as well as a scan angle of up to 30°. For great coverage and effect.
For the best effect we recommend combining your laser projector with a smoke, or haze machine. This will allow you to see the beams of the laser in mid-air and will give your next party or event the WOW factor it deserves.
Kondor Blue Gerald Undone MK2 Coiled Right Angle Micro HDMI To Full HDMI (30 To 60cm) – Purple (R5/R6)

Kondor Blue Gerald Undone MK2 Coiled Right Angle Micro HDMI To Full HDMI (30 To 60cm) – Purple (R5/R6)
Connector 1: HDMI Type-A Male
Connector 2: HDMI Type-D Male Angled
Cable Length: 12″-24″
Weight: 1 oz
Maximum Resolution Support: 4096 x 2160 at 60 Hz
3D Support: Yes
Jacket Type: Nylon
Tilta Armor man 3.0 Universal Gimbal Ring Adapter Clamp(Pair)
If you have a ring-based gimbal, the Universal Gimbal Ring Adapter Clamps allow for an easy quick release solution to attach and detach your gimbal to the Armor Man 3.0’s mechanical arms when in the normal operating mode. The clamps attach to each side of the gimbal ring and then after the adapters are attached to each of the Armor Man’s arms, the operator can simply connect the arms to the clamps on the gimbal to start operating. When you want to detach the gimbal, push in the adapters’ quick release buttons to slide off of the clamps.