Showing 2776–2790 of 6560 results
For insertion into 4583 compound negative carrier of SYSTEM-V enlargers and for former 4483 and 4493 compound negative carrier. Also for the holding devices FilmCopy Vario and FilmCopy Vario Kit.
For insertion into 4583 compound negative carrier of SYSTEM-V enlargers and for former 4483 and 4493 compound negative carrier.
For insertion into the 4583 compound negative carrier of SYSTEM-V enlargers and for former 4483 and 4493 compound negative carrier.
Device for positioning filters and masks below the enlarging lens. For all Kaiser enlargers built after 1981.
B & W enlarger for all film formats up to 6 x 9 cm (2.4 x 3.5 in.) and lenses up to 105 mm focal length.
B & W Enlargers SYSTEM-V
General specifications:
Technical specifications:
Lamp: Opal lamp 75 W, E 27 socket
Cord: approx. 2.50 m (8 ft. 2 in.)
Filter drawer: 85 x 85 mm (3.3 x 3.3 in.)
Column (HxWxD): approx. 1000 x 70 x 35 mm (39.4 x 2.8 x 1.4 in.)
Distance between optical axis and column base: approx. 220 mm (8.7 in.)
Can be converted into a copy stand.
Scope of supply: Incl. compound negative carrier, lamp, two lens holder rings and dust hood, without lens.
(Replacement lamp: 4356)
Suitable for all Kaiser enlargers.
(Replacement lamp: 4356)
For SYSTEM-V enlargers. Simple fitting with two coin screws on the enlarger head lower part 4568.
4449: for formats up to 6 x 9 cm (2.4 x 3.5 in.).
Fits all enlargers made from 10/94 on (05 series).
4542: for formats up to 6 x 6 cm (2.4 x 2.4 in.)
4443: for formats up to 24 x 36 mm (35 mm)
For use with all negative masks and glass inserts size 100 x 72,5 mm (3.9 x 2.9 in.). Suitable for all SYSTEM-V enlargers made from 10/94 on (05 series).
For mounted 6 x 6 slides with outer dimensions 7 x 7 cm (2.8 x 2.8 in.). Suitable for all SYSTEM-V enlargers made form 10/94 on (05 series). Four steplessly adjustable masking strips for selecting the desired detail.
Dimensions: approx. 142 x 37 x 123 mm (5.6 x 1.4 x 4.8 in.)
For formats up to 30 x 40 cm (12 x 16 in.)
Dimensions: 630 x 70 x 515 mm (24.8 x 2.8 x 18.4 in.)
Camera stand with integrated transmitted light source.
5278 – RB 5270 DX Copylizer Lighting Unit
5292 – Pressure Plate for Copylizer and Illumina Base exe.cutive
5294 – Metal Plate for Copylizer and Illumina Base exe.cutive
Can be combined with components of the Kaiser R1 system.
LED reflected light illuminating unit for Copylizer (5215) and exe.cutive LED Illumina Base Plate (5244) with two light banks for even and soft illumination.
Each light equipped with 161 selected white SMD LEDs. Emitted light has absolutely no IR and UV content. DC operation provides for flicker free light without residual ripple. Lights continuously dimmable, separately or in conjunction. Incl. removable diffusing cover (5466).
Lights can be tilted, swiveled and adjusted in height. Vertical lamp arms with height markings, tiltable with detents. Attaches to Copylizer/Illumina Base Plate with articulated joint bases. Comes with mains adapter.
LED surface lighting unit with thermo-management, consisting of two light banks for even and soft illumination. Suitable for Copylizer exe.cutive LED (5215) and Illumina Base?exe.cutive LED (5244). Can also be used as surface lighting unit for TopTable PRO shooting table (5921).
The efficiency of LEDs is much higher than that of conventional light sources. However, because LEDs also convert energy into heat, a thermal management system is necessary for optimal reproducibility, as otherwise both brightness and color temperature would change as the temperature rises.
The integrated thermo-management ensures that the adjusted brightness as well as the color temperature always remain constant, regardless of the room and unit temperature, thus achieving reproducible results. In addition, the LEDs have a longer service life.
This thermo-management includes both sensor-controlled temperature monitoring with dynamic compensation control and elaborate passive cooling via LED board and aluminum housing.
Each light equipped with 192 selected white SMD LEDs, 5600 Kelvin, CRI = 95. Emitted light has absolutely no IR and UV content, is flicker free without residual ripple. Lights can be dimmed separately or synchronously in 1 %-steps from 10 % up to 100 %. Illuminated info screen.
The light intensity of the two LED panels is matched to each other. This results in precisely homogeneous illumination with symmetrical alignment of the two light banks.
Memory function: The copy lighting starts with the brightness that was set before the last switch-off.
Lamp housings made of sturdy anodized aluminum section, can be swiveled, shifted and adjusted in height. Detachable soft screens. Vertical arms with height markings, tiltable with detents. Mounted with strong articulated joint bases. Comes with mains adapter.
Specifications:
Lights
LED arrays: 2 x 192 SMD LEDs
Color temperature: 5600 K
Color rendition index: CRI = 95
LED angle of radiation: 100?
Max. illumination* with soft screen: 4600 lux
?? ??????????????????????????w/o soft screen: 5200 lux
* based on uniform illumination of a 16.5 x 11.5 in. flat subject
Power consumption: 2 x ? 28 W
Operating voltage: 24 V
Light emitting area of one light: 39 x 16.5 cm (15.4 x 6.5 in.)
Vertical arms: 76 cm (29.9 in.) length / 20 x 20 mm (0.8 x 0.8 in.) edge dimension
Mains adapter
Input: 100-240 V, 50/60 Hz
Output: 24 V, 3 A
Mains lead: approx. 2.50 m (8.2 ft.)
Subject to errors and technical changes.
This product is marketed for the purpose of illumination for image capture. It is not intended for use in other applications.
Rosco E-Colour Gel Sheet 441 Full CT Straw (CTS) 1.2m x 53cm 
Manfrotto R111635 Column Locking Cone 
Kaiser Fototechnik 4489 Negative Mask, for 5 x 5 cm slides 
