Showing 2851–2865 of 6558 results
For 5631 Book Cradle.
Accessories
Special support for protective copy work from books with open sizes up to?73 x 45 cm (28.7 x 17.7 in.) and a thickness of 15 cm (5.9 in.).
Code no: 5631
Subject to errors and technical changes.
LED daylight lighting unit with thermo-management, consisting of two light banks for even and soft illumination.
For best reproducibility a thermo-management is necessary because light-emitting diodes also convert energy into heat, although the efficiency of LEDs is much higher than that of conventional light sources. As the temperature rises, both the brightness and the color temperature would change.
The integrated thermo-management ensures that the set brightness and color temperature always remain constant, regardless of the room and unit temperature, thus achieving reproducible results. In addition, the LEDs have a longer service life.
This thermo-management includes both sensor-controlled temperature monitoring with dynamic compensation control and elaborate passive cooling via LED board and aluminum housing.
Each light equipped with 272 selected white SMD LEDs, 5600 Kelvin, CRI = 95. Emitted light has absolutely no IR and UV content, is flicker free without residual ripple. Lights can be dimmed separately or synchronously in 1 %-steps from 10 % up to 100 %. Illuminated info screen.
The light intensity of the two LED panels is matched to each other. This results in precisely homogeneous illumination with symmetrical alignment of the two light banks.
Memory function: The copy lighting starts with the brightness that was set before the last switch-off.
Lamp housings made of sturdy anodized aluminum section, can be swiveled, shifted and adjusted in height. Detachable soft screens. Vertical arms with height markings, tiltable with detents. Mounted with strong die-cast clamp bases, clamp width up to 48 mm (1.9 in.). Comes with mains adapter.
Specifications:
Lights
LED arrays: 2 x 272 SMD LEDs
Color temperature: 5600 K
Color rendition index: CRI = 95
LED angle of radiation: 100?
Max. illumination* with soft screen: 6800 lux?
? ? ? ? ? ? ? ? ? ? ? ? ? ? ?w/o soft screen: 8000 lux
* based on uniform illumination of a 16.5 x 11.5 in. flat subject
Power consumption: 2 x ? 40 W
Operating voltage: 24 V
Light emitting area of one light: 58 x 16.5 cm (22.8 x 6.5 in.)
Vertical arms: 76 cm (29.9 in.) length / 20 x 20 mm (0.8 x 0.8 in.) edge dimension?
Mains adapter
Input: 100-240 V, 50/60 Hz
Output: 24 V, 4 A
Mains lead: approx. 2.50 m (8.2 ft.)
The RB 560 AL lighting unit is suitable for copy stands of the R1 System and RD system.
Subject to errors and technical changes.
This product is marketed for the purpose of illumination for image capture. It is not intended for use in other applications.
For RB 560 AL (5640) and RB 570 AX (5652) LED lighting units.
Eliminates and reduces reflections on non-metallic surfaces (e.g. glass, plastics, lacquer, oil paintings) when copying. (In addition a polarizing filter has to be used in front of the camera lens.)
Dimensions: approx. 60.3 x 16.9 cm (23.7 x 6.7 in.)
2 pieces.
Daylight-type LED lighting unit with two 100 watt soft lights for even and soft illumination. Dimmable. Vertical arms with 25 x 25 mm (1.0 x 1.0 in.) cross section and strong die-cast clamp bases.
Specifications:
Lights
LED arrays:?????????????????????? 2 x 504 High CRI LEDs
Color temperature:??????????? 5600 Kelvin
Color rendition index:??????? CRI ? 95
Angle of radiation:???????????? 85?
Light emitting area
?????? of one light:???????????????? 51 x 36 cm (20.1 x 14.2 in.)
Power consumption:????????? 2 x 100 W
Operating voltage:???????????? 100 – 240 V
Vertical arms
Length:?????????????????????????????? 87 cm (34.3 in.)
Cross section:?????????????????? 25 x 25 mm (1.0 x 1.0 in.)
Max. illumination*:????????????? 8200 lux
*based on uniform illumination of a 16.5 x 11.5 in. flat subject
Scope of delivery: 2 x soft light, 2 x vertical arm with die-cast clamp base and angle guide for the light, 2 x mains lead, 4 x cable holder.
Suitable for rePRO system copy stands and for RSDmot 1.8 (5600).
Additional information:
Excellent lighting quality due to 504 selected LEDs in each light. 5600 Kelvin color temperature (daylight / neutral color rendering), high color rendition index (CRI) of ? 95. Flicker-free light, free of infrared and UV content.
Specially textured diffuser screens (51 x 36 cm / 20.1 x 14.2 in.) scatter and direct the emitted light and thus provide for a soft illumination and high illuminance.
Brightness can be continuously dimmed between 10 and 100 %. Lights can be controlled individually.
Light housings made of high quality plastic, tiltable and adjustable in height along the vertical arms.
Vertical arms with height markings, tiltable in detent joints. For re-producible settings.
Strong die-cast clamp bases for mounting. Clamp width up to 55 mm (2.2 in.).
Cable holders for attaching the mains leads along the vertical arms.
Lights can also be used as studio lights on suitable stands and fixtures with 16 mm (5/8″) standard spigot.
Subject to errors and technical changes.
This product is marketed for the purpose of illumination for image capture. It is not intended for use in other applications.
?
LED daylight lighting unit with thermo-management, consisting of two light banks for even and soft illumination.
For best reproducibility a thermo-management is necessary because light-emitting diodes also convert energy into heat, although the efficiency of LEDs is much higher than that of conventional light sources. As the temperature rises, both the brightness and the color temperature would change.
The integrated thermo-management ensures that the set brightness and color temperature always remain constant, regardless of the room and unit temperature, thus achieving reproducible results. In addition, the LEDs have a longer service life.
This thermo-management includes both sensor-controlled temperature monitoring with dynamic compensation control and elaborate passive cooling via LED board and aluminum housing.
Each light equipped with 272 selected white SMD LEDs, 5600 Kelvin, CRI = 95. Emitted light has absolutely no IR and UV content, is flicker free without residual ripple. Lights can be dimmed separately or synchronously in 1 %-steps from 10 % up to 100 %. Illuminated info screen.
The light intensity of the two LED panels is matched to each other. This results in precisely homogeneous illumination with symmetrical alignment of the two light banks.
Memory function: The copy lighting starts with the brightness that was set before the last switch-off.
Lamp housings made of sturdy anodized aluminum section, can be swiveled, shifted and adjusted in height. Detachable soft screens. Vertical arms with height markings, tiltable with detents. Mounted with strong die-cast clamp bases, clamp width up to 55 mm (2.2 in.). Comes with mains adapter.
Specifications:
Lights
LED arrays: 2 x 272 SMD LEDs
Color temperature: 5600 K
Color rendition index: CRI = 95
LED angle of radiation: 100?
Max. illumination* with soft screen: 6800 lux?
? ? ? ? ? ? ? ? ? ? ? ? ? ? ?w/o soft screen: 8000 lux
* based on uniform illumination of a 16.5 x 11.5 in. flat subject
Power consumption: 2 x ? 40 W
Operating voltage: 24 V
Light emitting area of one light: 58 x 16.5 cm (22.8 x 6.5 in.)
Vertical arms: 87 cm (34.3 in.) length / 25 x 25 mm (1.0 x 1.0 in.) edge dimension?
Mains adapter
Input: 100-240 V, 50/60 Hz
Output: 24 V, 4 A
Mains lead: approx. 2.50 m (8.2 ft.)
The RB 570 AX lighting unit is suitable for copy stands of the rePRP System and for 5600 (from RD System).
Subject to errors and technical changes.
This product is marketed for the purpose of illumination for image capture. It is not intended for use in other applications.
Extremely sturdy column, made of a multi-section special extrusion, black anodized, with printed cm and inch scales with two-level motor-driven adjustment.
Specifications:
Total height: 216 cm (85 in.)
Column cross section: 120 x 80 mm (4.7 x 3.1 in.)
Maximum load:? on camera carrier: 10 kg (22 lbs.)
??????????????????????? on base board: 15 kg (33 lbs.)
Base board: 100 x 80 cm (39.4 x 31.5 in.)
Camera platform: 13 x 13 cm (5.1 x 5.1 in.)
Connecting thread (interchangeable): 1/4? / 3/8?
Subject to errors and technical changes.
Extremely sturdy column, made of a multi-section special extrusion, black anodized, with printed cm and inch scales.
Specifications:
Total height: 216 cm (85 in.)
Column cross section: 120 x 80 mm (4.7 x 3.1 in.)
Maximum load: 15 kg (33 lbs.)
Camera platform: 13 x 13 cm (5.1 x 5.1 in.)
Connecting thread (interchangeable): 1/4? / 3/8?
Subject to errors and technical changes.
Heavy-duty copy stand for analogue and digital image capturing work with two-level motor-driven adjustment.
Specifications:
Subject to errors and technical changes.
Heavy-duty copy stand for analogue and digital image capturing work with motor-driven height adjustment.
Stand is supplied without baseboard, intended to be used with Table for Copying Works?5712, with Table 5630?or custom-made devices.
Specifications:
Subject to errors and technical changes.
Wheeled table for RSP Xtra (5711) copy stand.
Ikan Air-Assist Pedestal with Easy Height Adjustment Lever E-Image Aluminium Pedestal 
Kaiser Fototechnik 6109 Cable Release with locking screw, 30 cm 
