Camera & Vision
Showing 5776–5790 of 6353 results
-
Lens filter systems and matte boxes
Tilta 95mm Variable ND for Tilta Mirage
The 95mm Variable ND for Tilta Mirage was developed in close collaboration with top tier optical manufacturers, the VND module accommodates multiple configurations, the lightest being only 130g.
Using new PL + CPL technology, the VND module can produce accurate colors even at its maximum density.
The Variable ND can be gradually adjusted, allowing you to keep consistent exposure when lighting conditions change unexpectedly.
The module has built-in hard stops between ND 0.3 ~ ND 2.7 to ensure no risk of an X-Pattern Cross Shadow.
The VND module can be wirelessly controlled by an optional micro motor to remotely adjust the ND level which offers more flexibility while shooting.
SKU: TIL-MB-T16-VND -
Camera rig attachments, brackets and components
Tilta Adjustable Lens Adapter Support for Sony FX9
This lens adapter support attaches to the Full Camera Cage for the Sony FX9 and FX6.
It improves the flexibility of the cages’ existing support system and allows you to easily secure various lens adapters.
This Adapter is specifically useful for securing the Sony E Mount to Canon EF Mount Lens Adapter.
SKU: TIL-ES-T18-LAS -
Camera rig attachments, brackets and components
Tilta Adjustable NATO Rail Extender Arms
These extender arms attach to the NATO rails on the side of the gimbal to provide you with adjustable rosette-based arms so that you can attach a variety of rosette-based operating handles to your setup.
Compatible with the DJI RS2, RSC2, RS3, and RS3 Pro.
SKU: TIL-TGA-ANA -
Phone rigs
Tilta Adjustable Phone Mounting Bracket (1/4″-20) – Black
Mount accessories via 1/4″-20 Thread and a Cold Shoe Receiver
supports a Wide Range of Smartphones
Supports Devices 58mm to 110m and Up to 15mm Thick
Offer Additional Security and Provide Dampened Clamping
Include Table Top Tripod Setups and Vehicle Interior RigsSKU: TIL-TA-PMB4-B -
Camera handles
Tilta Adjustable Top Handle for Sony FX6
This Adjustable Top Handle can rotate 180 degrees to fulfill your vertical shooting needs.
The handle is adjustable forward and backwards in either position to help you find your camera build’s center of gravity no matter which orientation you are shooting in.
Compatible with Camera Cage for Sony FX6, FX3, and FX30.
SKU: TIL-ES-T20-TH2 -
Lens filter systems and matte boxes
Tilta Advanced Control Knob for Tilta Mirage
This Advanced Control Knob for Tilta Mirage mounts directly to your Variable ND or Polarizer Filter in order to provide a more comfortable and precise option for adjusting the density of your filters.
The Control Knob attaches directly to these filters via two M3 threads which allows this accessory to be used in multiple situations, even when the filter is mounted directly to the lens via our Lightweight Clamp-On Adapter.
This accessory is the perfect solution for anyone who frequently needs to manually control their Variable ND or Polarizer.
SKU: TIL-MB-T16-ACK -
Camera rig attachments, brackets and components
Tilta Advanced I/O Module for RED V-RAPTOR
This Advanced I/O Module utilizes an integrated V-RAPTOR EXT Cable that expands communication with the camera body and offers increased functionality for Run Stop and Timecode via additional ports.
This Module can be mounted in a few different locations on the V-Raptor’s Camera Cage including the Top Handle, Top Plate, Bottom Mounting Plate or the integrated slot on the Battery Plate which can power and support the module.
When mounting the module in different locations other than the Battery Plate, the module can be powered via a 2 Pin Lemo input.
This allows this module to be incredibly versatile in terms of where and how it can be mounted to accommodate almost any camera build.
This Module includes a 3 Pin Fischer R/S port which allows users to trigger Run Stop and power a Nucleus M with a single cable via an optional 3 Pin Fischer Run Stop Cable.
The Module includes the following ports:
(1) 14.8V 2-Pin LEMO Input/Output
(1) 3 Pin Fischer R/S Port
(1) Timecode Port
(1) Red CTRL Port
(1) Genlock PortSKU: TIL-ESR-T08-IOM -
Camera rig attachments, brackets and components
Tilta Advanced kit for BMPCC 6K Pro- Black
Compatible with the original battery grip from Blackmagic Design. Under the half cage setup, remove the bottom plate and secure it to the bottom of the battery grip.
With the original battery grip mounted, the 15mm rod holder and 15mm rods can be installed to mount a follow focus, lens support, etc.
Newly patented viewfinder extension. Provides a fully immersive operating experience.
Find your best viewing angle. Easily adjustable for different user’s operating needs. Provides the best view for operating.
Extremely adjustable. The connecting joint supports 360° adjustment. The support arm can be adjusted both horizontally and vertically.
The top plate has 3 built-in cold shoe mounts and 1/4”-20 screw holes for mounting various accessories.
Supports the new Tilta M.2 SSD case. Easily mounts onto any 1/4”-20 screw holes on the camera cage.
Compatible with T5 and T7 SSD drives.
Includes ARRI Compatible Rosette, 1/4”-20 Screw Holes with Locating Points, and NATO Rail.
90° angled cable adapter for more secured mounting. Provides more efficient operating and data protection.
With the NATO rail adapter mounted, it can be installed to any 1/4”-20 screw hole.
Reserved space for securing an M.2 SSD case.
From Blackmagic Design.
Arm your camera with the Tiltaing Camera Cage for the Blackmagic Pocket Cinema Camera 6K Pro and 6K G2.
This Basic Kit for the BMPCC6K Pro/G2 provides protective armor for the camera body and includes relevant accessories to improve functionality.
The Full Cage offers several 1/4”-20 threads with locating pins, cold shoe receivers, a NATO Rail for Type IV and VI Side Handles, as well as Rod Attachment Ports for our Single Rod Holders.
It also features ARRI compatible rosettes, which are specifically designed for our Adjustable Top Handle Plus for more flexible operating and handling.
The right side arm module can be removed to turn this Full Cage into a Half Cage.
This offers more flexibility in situations where lighter builds are required such as when using a gimbal.
The Bottom Plate provides several ¼”-20 mounting points for attaching your camera to various quick release plates and is compatible with the ARCA Receiver of the RS2 Mounting Plate.
When using the Half Cage, the bottom plate can be extended to support the Black Magic Design Battery Grip.
A 15mm rod mount can be installed to support 15mm rods in front of the camera body when using the Battery Grip in a Half Cage setup.
When not using the Battery Grip, the included Quick Release Plate can be used to connect the camera cage to the included 15m LWS Baseplate Type VI.
The 15mm LWS Baseplate adds 15mm rod support to the system and allows you to mount rod based accessories such as matte boxes and follow focus systems.
The bottom of this baseplate natively connects to our Tilta Standard Dovetails and also supports various quick release plates via 1/4″-20 and 3/8″-16 threads.
The Advanced Power Handle mounts to the left side of the cage via a NATO Rail connection.
This handle features a 12V Micro DC Port (3.5/1.35mm) and an 8V USB-C port for powering your camera body or other accessories like our Nucleus Nano Wireless Lens Control System.
The handle is also able to control Run Stop on the BMPCC 6K Pro/G2 via an included Run Stop Cable.
The rotation of the handle and additional hand strap allows for comfortable and flexible operation of your camera system when shooting handheld.
The included Quick Release Top Handle can be attached to the top of the cage via a cold shoe receiver and can be further secured by a 1/4”-20 screw.
This provides an extremely secure connection to comfortably handle and operate your camera when shooting low angles.
The Top Handle features additional 1/4”-20 threads, cold shoe receivers and a horizontal 15mm rod holder for mounting external monitors or EVFs.
The SSD Drive Holder attaches directly to the cage via a 1/4″-20 screw and locating pin.
It can then clamp onto a m.2 SSD drive, securing it to your camera setup and allowing you to record footage onto a separate SSD card.
The included USB-C cable is then able to screw into the SSD Holder and the Side Panel of the Cage near the USB-C Port.
This creates an extremely secure connection between your camera and drive.
The 90 Degree HDMI Adapter mounts to the cage near the camera’s HDMI port and offers a secure connection that limits wear on the port itself.
NOTE: If you receive a kit with a T7 Holder, please contact us at: [email protected]
1:Full Camera Cage for BMPCC 6K Pro *1
2:Tiltaing Quick Release Handle *1
3:Tiltaing SSD Drive Holder for T5 *1
4:Tiltaing Left Side Advanced Power Handle with Run/Stop (F570 Battery) *1
5:Tiltaing Advanced Left Side Handle Attachment Type VI *1
6:Advanced Side Handle Run/Stop Cable for USB-C Port(RS-TA3-USBC)*1
7:Tiltaing 15mm LWS Baseplate Type VI *1
8:HDMI 90-Degree Adapter for BMPCC 4K/6K（TA-T01-HDA-90）*1
9:90-Degree USB-C Cable (30cm) for BMPCC 4K/6K（CB-USBC-30）*1
10:Aluminum rod 15*200mm Black *2
11:Aluminum rod 15*100mm Black *2
12:Connection Screw for 15mm Rod *2
13:Accessory Mounting Bracket for BMPCC 6K Pro Battery Grip *1
Dimensions: 13 x 6.5 x 3.5 inches
Weight: 3.1 lbs
Net Weight: 0.4 lbs
Materials: Aluminum alloy, stainless steel
Color: Black, Tactical GraySKU: TIL-TA-T11-A-B -
Stabilisers
Tilta Advanced Ring Grip for RS 2
Carbon fiber multi-functional ring grip. Supports dual-handed remote control of the gimbal and the camera.
Left handle supports Nucleus series lens control motors. Easily control focus and zoom to get smoother images.
Right handle controls gimbal and mode settings, as well as the record and photo functions of the camera.
A top handle bracket allows you to use the DJI RS 2 battery grip to provide power to your gimbal.
Reserved space for ARRI standard locating pins and cold shoes. Supports on-board monitor, microphone, and phone.
Provides options for gimbal battery and external V-mount/gold mount battery. Allows for continuous shooting and more productivity.
The D-tap port’s 14.8V 3A output and USB-A port’s 1.5 3A output allow you to power such accessories as an on-board monitor, wireless video transmitter, phone, etc.
Gimbal joystick, M-Key, Camera Control Key (auto focus / recording / photo control), Dual-NATO connectors
Menu Key for switching interface, accessing settings, gimbal control, and sleep/awake modes. Front focus wheel set up the connection to Nucleus-series lens control motors. Trigger for switching gimbal modes.
Reserved space for V-mount/gold mount battery plate. More power for the gimbal equals less downtime on set.
DJI RS 2 compatible quick release design. Efficient and secure.
WARNING: Please take extreme caution when connecting P-Tap power cables to the Power Supply Module (not included) as connecting cables backwards can damage your gimbal
The Advanced Ring Grip for RS2 and RS3 Pro allows you more flexibility when powering your gimbal, mounting accessories, controlling wireless follow focus motors and operating the gimbal body.
The design of the Ring Grip allows for further stability via multiple points of contact when operating the RS 2 and the included kickstands allow you to set the gimbal down after long takes to ensure the operator does not become fatigued.
The Ring Grip allows you to turn the RS2 or RS3 Pro’s Battery Handle into a Top Handle so you can quickly transition to low angle shots while providing additional power to your gimbal.
The system allows you to power the RS2 or RS3 Pro with either a Gold Mount Battery, V-Mount Battery, or the gimbal’s Battery Handle. The Advanced Ring Grip allows you to mount the Battery Handle to the top of the ring which doubles as a power source and top handle.
This can be used in combination with a Gold or V-Mount Battery Plate, which gives you more flexibility for powering accessories and longer battery life on set.
The included Remote Control Handle attaches to the right side of the Advanced Ring Grip to give you easy access to your gimbal’s settings as well as the record and photo functions of your camera.
The Thumbstick allows you to control the Pan and Tilt of your gimbal for maximum precision while operating and the Focus Wheel allows you to wirelessly control either a DJI or Nucleus Series Lens Control Motor.
The included Dual Channel Wireless Lens Control Handle attaches to the left side of the Advanced Ring Grip and allows you to control two channels of the Nucleus Series Lens Control Motors.
Easily adjust the Focus, Iris, or Zoom on your lens with the two Focus Wheels on the Handle — one on the back of the handle for your thumb to rotate and one on the front for your index finger.
Includes limited control of the RS2 and RS3 Pro’s Menu Settings via the Menu Key and features a trigger for quick switching between gimbal modes.
Each handle requires a single 18650 battery to operate wirelessly.
They can be powered by the Top Handle or Battery Plate when connected to the Ring Grip.
NOTE: Please take extreme caution when mounting 18650 batteries as placing them in the wrong orientation can damage the handles.
RS3/RS3 Pro: The M Key is NOT able to mimic the function of the gimbal. The M Key on this unit can ONLY change the Mode setting.
Dimensions: 24 x 13 x 4 inches
Weight: 4.6 lbs
Net Weight: 2.5 lbs
Material: Carbon fiber
Color: Black
The diameter of the Basic/Advanced Ring Grip is 570mm x 510mm x 175mm.
The diameter of the Grip is 30mm.SKU: TIL-TGA-ARG -
-
-
