-
×
Tether Tools TetherPro USB-C to 2.0 Mini-B 8-Pin
1 × $80.00 -
×
LARH Textile Grid Half (1/2) Silent White 20' X 20'
1 × $1,261.70
Subtotal: $1,341.70
Lighting
Showing 4876–4890 of 5161 results
-
Fluorescent and tungsten lighting
TecArt Retrofit KinoFlo Ballast 4 bank
This ballast type is compatible with no modifications for the following KinoFlo models:
• 4 Bank System.
• 2 Bank System.
• Single System.
• Mega Double System.
• Mega Single System.FEATURES
• Better performance.
• Greater reliability.
• Higher output.
• Perfect colour temperature.
• 240V operation.
• Very competitively priced.SKU: n/a -
Fluorescent and tungsten lighting
TecArt Retrofit KinoFlo Ballast card
This is a direct swapover card requiring no modifications for all KinoFlo ballast models, including 2ft, 4ft Single, Double, 4 Bank, 6ft & 8ft Mega Lights and Wall-o-lights.
FEATURES
• Better performance.
• Greater reliability.
• Higher output.
• Perfect colour temperature.
• 240V operation.
• Pin-to-pin direct replacement.
• Very competitively priced.SKU: n/a -
Fluorescent and tungsten lighting
TecArt Retrofit KinoFlo Ballast single
This ballast type is compatible with no modifications for the following KinoFlo models:
• 4 Bank System.
• 2 Bank System.
• Single System.
• Mega Double System.
• Mega Single System.FEATURES
• Better performance.
• Greater reliability.
• Higher output.
• Perfect colour temperature.
• 240V operation.
• Very competitively priced.SKU: n/a -
Data and DMX distribution
TecArt Splitter Desktop DMX 4 way
The TecArt range of data splitters are available as desktop units.
Each output has a separate driver and opto-isolator to ensure the highest possible level of protection.
The unit is available as a standard DMX splitter or with the option of RDM.
RDM compliant device “ANSI/ESTA E1.20 Entertainment Technology – Remote Device Management over USITT DMX512”.
RDM or Remote Device Management is a protocol enhancement to DMX512 that allows Bi-directional communications between light fixtures and lighting consoles or RDM specific software over a standard DMX line.
DMXS4DT can be supplied with an external 12 – 48VDC power supply.
FEATURES
• DMX-512 In/Out/Thru.
• External Power Supply 12 – 48VDC.
• 2 Main indication LEDs.SPECIFICATIONS
• Input voltage: 12 – 48VDC.
• Power supply: External.
• Total power: 6W @ 24VDC.
• Dimension: 105mm (L) 85mm (W) 60mm (H).
• Mounting method: Desktop.
• DMX signal input: XLR.
• DMX signal output: XLR.
• Outputs: 4 Opto isolated.
• Temperature: 0 – 40 degree Celsius.SKU: n/a -
Data and DMX distribution
TecArt Splitter Desktop RDM 4 way
The TecArt range of data splitters are available as desktop units.
Each output has a separate driver and opto-isolator to ensure the highest possible level of protection.
The unit is available as a standard DMX splitter or with the option of RDM.
RDM compliant device “ANSI/ESTA E1.20 Entertainment Technology – Remote Device Management over USITT DMX512”.
RDM or Remote Device Management is a protocol enhancement to DMX512 that allows Bi-directional communications between light fixtures and lighting consoles or RDM specific software over a standard DMX line.
DMXS4DT can be supplied with an external 12 – 48VDC power supply.
FEATURES
• DMX-512 In/Out/Thru.
• External Power Supply 12 – 48VDC.
• 2 Main indication LEDs.SPECIFICATIONS
• Input voltage: 12 – 48VDC.
• Power supply: External.
• Total power: 6W @ 24VDC.
• Dimension: 105mm (L) 85mm (W) 60mm (H).
• Mounting method: Desktop.
• DMX signal input: XLR.
• DMX signal output: XLR.
• Outputs: 4 Opto isolated.
• Temperature: 0 – 40 degree Celsius.SKU: n/a -
Data and DMX distribution
TecArt Splitter DIN Rail DMX 4 way
The TecArt range of data splitters are available as DIN Rail mountable units.
Each output has a separate driver and opto-isolator to ensure the highest possible level of protection.
The unit is available as a standard DMX splitter or with the option of RDM.
RDM compliant device “ANSI/ESTA E1.20 Entertainment Technology – Remote Device Management over USITT DMX512”.
RDM or Remote Device Management is a protocol enhancement to DMX512 that allows Bi-directional communications between light fixtures and lighting consoles or RDM specific software over a standard DMX line.
DMXS4DR can be supplied with an external 12 – 48VDC power supply.
FEATURES
• DMX-512 In/Out/Thru.
• External Power Supply 12 – 48VDC.
• Terminal Strip Output and Input Connector.
• 2 Main indication LEDs.SPECIFICATIONS
• Input voltage: 12 – 48VDC.
• Power supply: External.
• Total power: 6W @ 24VDC.
• Dimension: 105mm (L) 85mm (W) 60mm (H).
• Mounting method: DIN Rail.
• DMX signal input: Terminal block.
• DMX signal output: Terminal block.
• Outputs: 4 Opto isolated.
• Temperature: 0 – 40 degree Celsius.SKU: n/a -
Data and DMX distribution
TecArt Splitter DIN Rail RDM 4 way
The TecArt range of data splitters are available as DIN Rail mountable units.
Each output has a separate driver and opto-isolator to ensure the highest possible level of protection.
The unit is available as a standard DMX splitter or with the option of RDM.
RDM compliant device “ANSI/ESTA E1.20 Entertainment Technology – Remote Device Management over USITT DMX512”.
RDM or Remote Device Management is a protocol enhancement to DMX512 that allows Bi-directional communications between light fixtures and lighting consoles or RDM specific software over a standard DMX line.
DMXS4DR can be supplied with an external 12 – 48VDC power supply.
FEATURES
• DMX-512 In/Out/Thru.
• External Power Supply 12 – 48VDC.
• Terminal Strip Output and Input Connector.
• 2 Main indication LEDs.SPECIFICATIONS
• Input voltage: 12 – 48VDC.
• Power supply: External.
• Total power: 6W @ 24VDC.
• Dimension: 105mm (L) 85mm (W) 60mm (H).
• Mounting method: DIN Rail.
• DMX signal input: Terminal block.
• DMX signal output: Terminal block.
• Outputs: 4 Opto isolated.
• Temperature: 0 – 40 degree Celsius.SKU: n/a -
Data and DMX distribution
TecArt Splitter Rack Mount DMX 8 way
The TecArt range of data splitters are available as 19” rack mount units.
The units are available with a choice of 3 or 5 pin connectors. Each output has a separate driver, opto-isolator and power supply to ensure the highest possible level of protection.
SKU: n/a -
Data and DMX distribution
TecArt Splitter Rack Mount RDM 8 way
The TecArt range of data splitters are available as 19” rack mount units.
The units are available with a choice of 3 or 5 pin connectors. Each output has a separate driver, opto-isolator and power supply to ensure the highest possible level of protection.
SKU: n/a -
Data and DMX distribution
TecArt Splitter Truss Mount DMX 4 way
The TecArt range of data splitters are available as truss mount units.
The units are available with a choice of 3 or 5 pin connectors and have 4 outputs. Each output has a separate driver, opto-isolator and power supply to ensure the highest possible level of protection.
The unit is available as a standard DMX splitter or with the option of RDM.
RDM compliant device “ANSI/ESTA E1.20 Entertainment Technology – Remote Device Management over USITT DMX512”.
RDM or Remote Device Management is a protocol enhancement to DMX512 that allows Bi-directional communications between light fixtures and lighting consoles or RDM specific software over a standard DMX line.
SKU: n/a -
Data and DMX distribution
TecArt Splitter Truss Mount RDM 4 way
The TecArt range of data splitters are available as truss mount units.
The units are available with a choice of 3 or 5 pin connectors and have 4 outputs. Each output has a separate driver, opto-isolator and power supply to ensure the highest possible level of protection.
The unit is available as a standard DMX splitter or with the option of RDM.
RDM compliant device “ANSI/ESTA E1.20 Entertainment Technology – Remote Device Management over USITT DMX512”.
RDM or Remote Device Management is a protocol enhancement to DMX512 that allows Bi-directional communications between light fixtures and lighting consoles or RDM specific software over a standard DMX line.
SKU: n/a -
Data and DMX distribution
TecArt USB to DMX Controller
The USB to DMX Controller allows the delivery of a DMX512 signal using third party computer-based lighting control software. It can also be used as an RDM addressing tool. The unit features a mini-USB connection and DMX input and output connectors via 5-pin male/female XLRs.
SKU: n/a -
Workstations and accessories
Tether Tools AeroTrac 1/4″-20 Accessory Threads (Set Of 3)
For the AeroTrac Workstation
Adds Mounting Points for Accessories
Mounts to the Top or Bottom of the Track
1/4″-20 Threads Fit Most Gear
Secure Installation and Hold
Aluminum Alloy Construction
Limited Lifetime WarrantySKU: TET-30.ATQ20-3 -
Workstations and accessories
Tether Tools AeroTrac 3/8″-16 Accessory Threads (Set Of 3)
- For the AeroTrac Workstation
- Adds Mounting Points for Accessories
- Mounts to the Top or Bottom of the Track
- 3/8″-16 Thread for Wide Compatibility
- Secure Installation and Hold
- Aluminum Alloy Construction
- Limited Lifetime Warranty
SKU: TET-30.AT38-3 -
