The Core SWX Powerbase Edge Sony L-series Battery Cable allows you to power devices that use Sony L-Series batteries from the Core SWX Powerbase EDGE battery. The cable runs 15cm long and features an L-Series dummy battery on one end and a barrel connector for the Powerbase EDGE on the other.
Core SWX Powerbase Edge Sony L-series Battery Cable
Use with Sony L-Series Devices
Sony L-Series Dummy Battery
Connect to Core SWX Powerbase EDGE
6″ Length
$55.00
Related products
-
Battery adapters and DC couplers
Dynacore D-SA V-Lock to Gold Mount Adaptor
0 out of 5(0)It may convert the V-plate to the Gold Mount bracket. It offers a solution to allow the use of Gold Mount batteries on V-Mount cameras.
It can also be used as a charger adapter, enabling you to charge Gold Mount batteries on V-lock chargers.
- Lock Gold Mount battery to the Gold Mount side of the D-SA, then the battery converts into V-Mount.
- Lock V-Mount side of D-SA with the camera, then the battery ready to work.
Weight: Approx 0.15Kg
Dimension: 120×84×24.5mmSKU: DYN-D-SA$100.00 -
Battery adapters and DC couplers
Dynacore D-TMS Tiny Hot Swap Plate for V-Mount Pocket-Sized Batteries
Battery adapters and DC couplersDynacore D-TMS Tiny Hot Swap Plate for V-Mount Pocket-Sized Batteries
0 out of 5(0)- Allows Hot Swapping of (2) Tiny V-Mount batteries
- LED Power Indicator for each Battery Position
- Adds 2x D-tap outputs
- Wire-Free internal
- Multiple circuit protection
SKU: DYN-D-TMS$250.80 -
Battery adapters and DC couplers
Dynacore D-2BS-24 Converter V-Lock 14.8V input to 24V output
0 out of 5(0)D-2BS/A-24 is a power station designed to utilise two 14.4 volt V-Lock batteries creating a power source outputing power for any device needing 24Volts, such as an LED panel.
It can supply up to 240Watt output (24V, 10A).
Designed to work with equal power batteries where a larger capacity is preferredLCD Display indicates Output Voltage
The unit has a Low Voltage Indicator LED to warn of potential problems shown here:
Color Red=Under/Over Voltage
Color Green=Good
Green Blinking=Battery LowOutput is via 3 Pin Female XLR Output
24V, 10A, 240W(Max)A Hexagon connector can be mounted to a stand using a super clamp or convi clamp.
SKU: DYN-D-2BS-24$289.00 -
Battery adapters and DC couplers
Dynacore D-MS-CA Mount Tiny V-Lock for camera cage
0 out of 5(0)Dynacore Tiny V-Lock Cage mount.
It can be fixed in any position in the camera cage with 1/4 thread.
It includes Two D-tap outputs for powering of multiple devices.
Weight: 0.1Kg
Size: 112*83*26mm
SKU: DYN-D-MS-CA$76.00