The IDX CUE-D300 286Wh Li-ion V-Mount Battery powers your camera or other pro video equipment. The battery can supply up to 16.8 VDC to the plate, and can also provide up to 100W of unregulated power for accessories through the integrated D-Tap output. The IDX CUE-D300 is designed to power your camera or light for extended periods of time, limiting the number of battery changes during your production day. CUE series batteries feature an internal pack design which cradles each cell and isolates it to enhance reliability and safety. IDX CUE-D batteries should be charged using IDX-ENDURA chargers; third-party chargers may not charge CUE-D batteries correctly.
IDX CUE-D300 286Wh Li-ion V-Mount Battery
High-Capacity and High-Load Battery
Supports up to 14A Draw
V-Mount
Internal Pack Design Protects Cells
$549.00
Related products
-
V-Lock and B-Mount batteries
Dynacore DS-150SI Battery V-Lock Regular 14.8V 150Wh with built in charger
V-Lock and B-Mount batteriesDynacore DS-150SI Battery V-Lock Regular 14.8V 150Wh with built in charger
0 out of 5(0)● Internal Charger Battery V-Mount.
● Lightweight, compact, high-performance Lithium-ion battery pack.
● It can be charged by itself without using an external charger. The LED indicator will light on from 1 LED to 5 LEDs during charging, and all off when fully charged.
● The five-step LED power status indicator shows accurately remaining battery capacity.
● Industry-standard Power Tap& USB output(5V, 2A) can fit on-board Camera Light and other accessories. Before using the USB output, long-press the LED check button for 3 seconds to activate it.
● Input Voltage AC90V~240V 50~60Hz, apply to the global power grid.
● Built-in intelligent IC circuit control, protection for over-charge, over-discharge, over-current, outside circuit short and non-equilibrium an unconventional situation.
● Non-memory effect.
● Environment-friendly: No poisonous elements
● Dynacore Batteries are manufactured according to CE, ROHS standardSKU: DYN-DS-150SI -
V-Lock and B-Mount batteries
RED REDVOLT NANO-V Mount 49Wh Battery
0 out of 5(0)The REDVOLT NANO-V battery is a small lightweight power solution for the KOMODO-X, weighing in at only 0.63lbs (288g), ideal for gimbals, drones, and other setups where form factor and weight matter. The batteries dimensions (66 x 88 x 44mm) ensure a completely flat surface on the top and sides of the camera allowing for various combinations of cages and plates to be attached uninterrupted.
Featuring a 49Wh capacity with a maximum output of 6A the battery can power the KOMODO-X and DSMC3 RED Touch 7.0 inch LCD for short durations when wanting to shoot as light weight as possible.
REDVOLT NANO-V was designed in partnership with Core SWX and is compatible with most cameras/modules that accept V-Lock batteries. For issues or troubleshooting, please visit https://coreswx.supportsystem.com.
SKU: RED-740-0059 -
V-Lock and B-Mount batteries
IDX Duo-C98 (96Wh Li-Ion V-Mount Battery w 2x D-Tap and USB)
0 out of 5(0)The DUO-C98 is the worlds most compact high capacity IATA friendly(<100Wh) Li-ion professional battery with multiple power outputs – perfect for handheld gimbal and aerial setups. The DUO-C98 comes equipped with two built-in D-Taps and a single built-in USB output to power ancillary accessories.
- 14.4V 96Wh V-Mount Battery
- Data Information Displays in Viewfinder
- Handles Up to 10A Loads
- Two Unregulated D-Tap Accessory Outputs
SKU: IDX-ID-DUO-C98 -
V-Lock and B-Mount batteries
Core SWX Hypercore NEO 9 Mini 98Wh AB-Mount Battery
0 out of 5(0)NEO 16A Peak with 12A draw
Firmware upgradable battery packs through USB
UN38.3 Certified for air travel safe transportation
New backlit multipurpose LCD
View battery vitals through RFID reader on the battery
Intergrated Smart P-Tap
Rates for 2000 cycles with a 2 year warranty
Rubberised housing to protect against accidental drops
Storage mode built-in
Hibernation mode when not in use after 48 hoursSKU: CSX-52.NEO-9AG -
V-Lock and B-Mount batteries
Fxlion BM-HV300 B-Mount Battery 28.8V 293Wh
0 out of 5(0)28V B-Mount Battery
The ultra volume energy ratio design, use high power cells, rechargeable Li-ion battery, no memory effect.
With 2*D-Tap,1*USB-A and 1*USB-C multiple outputs options for equipment power supply.
Maximum 250W/10A output can power high voltage camera and high power lighting.
Build in smart PCB for over-heat, over-charge, over-discharge and over-current protections.
5-level indicators.
Build in smart communication system, can display the battery voltage / battery capacity / operating time / working current on the
camera with communication function.
More safe and compatible structure, with rubber corners can adapt to falling in the work without damaging the shell.
Use special materials for battery negative and positive can bear the temperature up to 230℃, The problem of high-temperature
damaged components caused by high current discharge is solved.
Use professional B-mount or USB-C charger to charge B-mount battery.
D-Tap,USB-A and USB-C ports with dust cap design.SKU: FXL-BM-HV300