The IDX Imicro-150 14.5V 145Wh Li-Ion V-Mount Battery features a compact size of only 3.8 x 2.8″. Supporting up to a 14A draw, it’s suitable for up to the most demanding cinema cameras, and its smaller size makes it a more flexible choice for gimbal and mobile applications. Despite its small form, the Imicro-150 provides two D-Tap outputs, one of them being an IDX D-Tap Advanced output that can alternatively be used to charge the battery. This advanced output supports D-Tap chargers such as the optional IDX VL-DT1, which is a portable charger. Otherwise, any IDX Endura V-mount battery can be used.
IDX iMicro-150 14.5V 145Wh Li-Ion V-Mount Battery
Supports up to 14A Loads
Compact Size Suitable for Gimbals/Drones
2 x D-Tap Outputs (One Allows Charging)
5-LED Gauge; Battery Circuit Protection
$429.00
Related products
-
V-Lock and B-Mount batteries
Core SWX Hypercore NEO 9S Mini 98Wh V-Mount Battery
0 out of 5(0)NEO 16A Peak with 12A draw
Firmware upgradable battery packs through USB
UN38.3 Certified for air travel safe transportation
New backlit multipurpose LCD
View battery vitals through RFID reader on the battery
Intergrated Smart P-Tap
Rates for 2000 cycles with a 2 year warranty
Rubberised housing to protect against accidental drops
Storage mode built-in
Hibernation mode when not in use after 48 hoursSKU: CSX-52.NEO-9S -
V-Lock and B-Mount batteries
Dynacore DS-260S Battery V-Lock Regular 14.8V 260Wh
0 out of 5(0)- Lightweight, compact, high-performance Lithium-ion battery pack.
- The five-step LED power status indicator shows accurately remaining battery capacity.
- Industry-standard Power Tap can fit on-board Camera Light.
- Built-in intelligent IC circuit control, protection for over-charge, over-discharge, over current, short circuit and non-equilibrium an unconventional situation.
- Non-memory effect.
- Environment-friendly: No poisonous elements such as hydrargyrum and cadmium, etc.
SKU: DYN-DS-260S -
V-Lock and B-Mount batteries
Fxlion BP-7S270 Battery V-Lock 26V 270Wh
0 out of 5(0)The 26V V-Mount/Gold-Mount battery is suited for equipment inputs ranging from 18 to 30VDC. The internal protection chips makes sure there won’t be any over-heating, over-charge, over-discharge and over- current, causing any risk or harm.
With a normal working current of 10 Amps at 26VDC the battery can provide much power. If your equipment uses more than the 10 Amps – you can get a maximum of 15 Amps Output.
The battery is chargeable and can be used in temperatures ranging from -20°C~ +55°C with a Maximum loss in sub zero temperatures of half the capacity.
A 4-level indicator shows you the remaining capacity. There’s a dedicated 26V charger available with a output of 29.4V at 5 Amps. This charger may not be used for any other equipment as the high voltage can kill electronic circuits that are not suitable.
SKU: FXL-BP-7S270 -
V-Lock and B-Mount batteries
Fxlion BM-HV300 B-Mount Battery 28.8V 293Wh
0 out of 5(0)28V B-Mount Battery
The ultra volume energy ratio design, use high power cells, rechargeable Li-ion battery, no memory effect.
With 2*D-Tap,1*USB-A and 1*USB-C multiple outputs options for equipment power supply.
Maximum 250W/10A output can power high voltage camera and high power lighting.
Build in smart PCB for over-heat, over-charge, over-discharge and over-current protections.
5-level indicators.
Build in smart communication system, can display the battery voltage / battery capacity / operating time / working current on the
camera with communication function.
More safe and compatible structure, with rubber corners can adapt to falling in the work without damaging the shell.
Use special materials for battery negative and positive can bear the temperature up to 230℃, The problem of high-temperature
damaged components caused by high current discharge is solved.
Use professional B-mount or USB-C charger to charge B-mount battery.
D-Tap,USB-A and USB-C ports with dust cap design.SKU: FXL-BM-HV300 -
V-Lock and B-Mount batteries
Dynacore DPM-98S Tiny V-Lock 14.8V 98Wh Battery
0 out of 5(0)- Tiny V-mount battery, Pocket fit
- 1x D-tap output & charging input
- 1x USB 5V/2A output
- 4-step LED power indicator
- Multiple circuit protections
- Voltage: 14.8V
- 98Wh/6.7Ah capacity
- -30°C ~ +50°C operating temperature
SKU: DYN-DPM-98S