Miller Skyline 70 1STG AL Tripod System

The 3038 Alloy, Sprinter II, 2-stage Arrowx 3 system, fitted with ground spreader is designed for speed of setup, high level of stability and flexibility of payload, is best suited for level terrain.
Featuring a wide payload range, precision fluid drag and Miller’s innovative 16 position CB Plus™ counterbalance system, Arrowx 3 delivers the flexibility, speed of set up and accuracy of shot, professionals expect and demand.
1-19kg (2.2-41.8lbs) payload range and 5 + 0 selectable pan-tilt fluid drag positions make Arrowx 3 ideal for news gathering and documentaries, enabling it to be used with a wide range of cameras, lenses and accessories.
The Arrowx 3 is matched with the 2 stage Sprinter II (alloy) tripod and ground spreader to give incredible speed of set up and incredible height range.
Gone are the days where you have to carry two tripods to use large and small cameras on the same shoot.

The 3753 CX10 Toggle 2-stage (alloy) tripod system with a robust 100mm ball levelling fluid head designed for users needing the stability that comes with 100mm tripods, cost effectively.
CX10 employs CB Plus technology providing 16 positions of counterbalance and 5+0 levels of pan and tilt settings of Miller’s fluid drag with 60mm of camera plate travel, enabling you to easily select the perfect settings to match your configuration for ultimate camera control.
The CX10 is matched with the 2-stage Toggle (alloy) tripod and on-ground spreader to provide a large height range 543-1713mm (21.4-67.4″), positive leg toggle locks and quick pack down.

The Benro BVX25CFK is a professional heavy-duty carbon fiber video tripod and head combination. The BVX25H video head supports up to 55 lb (25 kg) and the 100mm bowl tripod has a maximum load capacity of 132 lb (60 kg).

There are 16 individual steps of counterbalance allowing you to dial in the right amount of counterbalance required for each setup. Each step is repeatable which helps save time when changing lenses or adding accessories. The pan drag and tilt drag mechanisms each provide 6 individual steps (1-6) of drag adjustment to help fine tune the smooth movements.

A sliding top plate with a snap-in style quick release can be shifted forward or backward to help properly balance your camera rig. The QRX25 camera plate comes with one ¼”-20 camera screw and one 3/8”-16 camera screw. An extra set of camera screws is included on the sliding platform.

The carbon fiber tripod is a 2 stage, 3 section tandem style which incorporates a 100mm bowl. The leg locks are oversized levers that can be operated while wearing gloves. The lower stage leg lock lever has an additional lip, which can be opened and closed with your foot. This allows you to hold onto your camera rig while adjusting the height of the tripod. Each tripod includes a floor spreader, a telescoping pan arm and a padded carrying case.