Miller Skyline 90 HD 1 Stage Alloy Tripod System

The 3753 CX10 Toggle 2-stage (alloy) tripod system with a robust 100mm ball levelling fluid head designed for users needing the stability that comes with 100mm tripods, cost effectively.
CX10 employs CB Plus technology providing 16 positions of counterbalance and 5+0 levels of pan and tilt settings of Miller’s fluid drag with 60mm of camera plate travel, enabling you to easily select the perfect settings to match your configuration for ultimate camera control.
The CX10 is matched with the 2-stage Toggle (alloy) tripod and on-ground spreader to provide a large height range 543-1713mm (21.4-67.4″), positive leg toggle locks and quick pack down.

The Benro BV10 tripod kit supports up to 10kgs making it a perfect match for studio applications and larger fully rigged video cameras.

All of the main controls, other than counterbalance, are located on the left side of the head making it easy to make adjustments with a single hand while operating the camera. The 5-step counterbalance (steps 0-4) allows you to dial in the correct amount of counterbalance for your set-up. The 4 step pan & tilt movements make sure your movements are smooth and steady. One 3/8″ accessory mount come in handy when needing to add a simple audio recorder or monitor. For added versatility, the tie down stud is removable to convert the BV10 head to flat base mode for mounting to a slider. Excellent stability is achieved with the integrated 100mm metal ball. The eighth generation two stage aluminium tripod is a double tandem leg design that uses an adjustable, removable spreader, a metal 100mm bowl, oversized quick positive leg locks and dual spike feet with pads, making this kit perfect for heavy loads, ideal for supporting jibs and fully rigged cameras.

The tripod system extends to a maximum height of 164cm, while getting as low as 74cm. A carry case and shoulder strap are included.

The 3097 Alloy, Sprinter II, 2-stage Arrowx 5 system, fitted with ground spreader is designed for speed of setup, high level of stability and flexibility of payload, is best suited for level terrain.
Featuring a wide payload range, precision fluid drag and Miller’s innovative 16 position CB Plus™ counterbalance system, Arrowx 5 delivers the flexibility, speed of set up and accuracy of shot, professionals expect and demand.
2-21kg (4.4-46.2lbs) payload range and 7 + 0 selectable pan-tilt fluid drag positions make
Arrowx 5 ideal for ENG and EFP, enabling it to be used with a wide range of cameras, lenses and accessories and offering.

The Arrowx 5 is matched with the 2 stage Sprinter II (alloy) tripod and ground spreader to give incredible speed of set up and incredible height range.
Gone are the days where you have to carry two tripods to use large and small cameras on the same shoot.