$1,218.95
The Nanlux FL-28 is a lighter-weight Fresnel lens for the Evoke series LED spotlights. Built for use on the Evoke 900C, Evoke 1200, Evoke 1200B, and Evoke 2400B, the Nanlux FL-28 is designed for easy travel and rigging. It’s significantly smaller and lighter than its Nanlux FL-35 sibling. The FL-35 weighs 10.84kg, whereas the new, more svelte FL-28 weighs only 3.86kg.
The new Nanlux FL-28 reduces the size of the FL-35 by 60%, saving precious space in your van.
Despite its smaller size, it’s still extremely bright. With the Evoke 1200B, it puts out 50,330 lux at 3 metres with a 17° beam angle. On the Evoke 900C, this drops down to a still impressive 38,580 lux.
The FL-28 can still handle the heat of the maximum output of Evoke 1200W lights. When it comes to the most recent Evoke 2400B spotlight, the FL-28 will work with that fixture, but it will automatically limit the output to roughly 50% to prevent heat damage to the Fresnel lens. This will result in a maximum reading of 25,610 lux @3m (5600K, 17° beam angle). NANLUX will soon launch another new Fresnel lens specifically for the Evoke 2400B that will make full use of its higher output.
The NANLUX FL-28 uses the company’s NL mount system with communication pins, so the fixture will know which accessory is installed. This way, the FL-28 Fresnel can tell a 2400B fixture to operate at a maximum of 50%, to prevent melting.
The existing NANLUX FL-35YK Fresnel will remain available for users who require a larger degree of beam angle adjustment. The FL-35YK offers a glass lens and tighter 11° spot, and a wider 45° flood range (versus the 17° to 43° of the FL-28).
When both Fresnel lenses are set at a 30° beam angle, the output achieved by either Fresnel lens is similar:
| Brand |
|---|
The Nanlite SB-MM60 parabolic softbox offers a quality diffused light that will enhance videos, photos etc. features an outer diffusion material and an optional grid to control light spill and give more direction.
This softbox includes a mount specifically designed to fit the Forza FM Mount lights. As of October 2020, the Nanlite SB-FMM60 softbox also includes a Bowens S-mount adaptor ring to allow this softbox to be mounted to the larger range of Forza lights, such as the Forza 200, Forza 300 and Forza 500. To swap the Forza 60 mount ring to use the Bowens mount ring, you will need a screwdriver to remove the screws holding the mount into the softbox.
The SB-FMM60 softbox also includes two outer diffuser options, a lighter “high transmission” diffuser ideal for the Forza 60, 60B and Forza 150, and a more opaque “soft” diffuser better suited to higher output lights such as the Forza 200, 300, and 500.
The Nanlite Para 90 Softbox with Bowens Mount (35in). A 16-Sided Softbox with a deep parabolic design that creates even lighting with a wrap-around quality and natural-looking catchlights while increasing directional control.
Godox TL30 2 Light RGB Tube Light Kit 30cm 
Godox TL30 RGB Tube Light 30cm 
Nanlite protective COB LED cap for Forza 300 and 500 
Lishuai Softbox for Lishuai Huescape LED Panel RGBW 60 x 45cm 120W 
