RED KOMODO Link Adapter
The KOMODO Link adapter provides KOMODO with a USB-C interface to extend the usability of the camera. Directly connect the KOMODO Link adapter to an iPhone or Android device and get a live preview with minimal latency via RED_CONTROL. Remote camera control and FTPS* (File Transfer Protocol Secure) functions via Ethernet are also capable if you attach a USB-C to Ethernet adapter (not included) which can be used for the following additional functions:
Wired Camera Control
-Remote view/access over camera and menus over long distances
-Control multiple cameras networked in an Array**
Upload and Download from Camera via FTPS
-Upload files such as LUT’s, CDL’s, presets and firmware upgrades
-Download R3D or ProRes media files***, LUT’s, CDL’s and presets
Physical connection where Wi-Fi is not suited.
NOTE: The KOMODO Link adapter is not compatible with DSMC, DSMC2 or RED RANGER camera systems. KOMODO Link will not work in conjunction with the KOMODO Outrigger Handle.
*Available in KOMODO firmware v1.5 or later
**Using RCP2 commands
***The data rate of the FTPS transfer with encryption maxes out at roughly Gigabit ethernet speeds.
$685.00
Related products
-
Camera rig attachments, brackets and components
Manfrotto Rods 300mm for Camera Cage Fits MVCCS, MVCCM, MVCCL paired with MVCCBP
Camera rig attachments, brackets and componentsManfrotto Rods 300mm for Camera Cage Fits MVCCS, MVCCM, MVCCL paired with MVCCBP
These 300mm (11.8”) long Rods are one of the basic building blocks of all SYMPLA rigs, and are always used in parallel pairs to create a track which allows components to be mounted and positioned correctly.
Rods can be united to make longer tracks (using the included screw junctions), joined at different heights using the V-Offset component, or shifted laterally using the H-Offset component. Although the possible uses are numerous, these long Rods primarily serve as the track for SYMPLA Fixed or Variable Plates, since the extra length allows a wide range of camera and lens (and viewfinder) combinations to be correctly positioned for the operator and for other SYMPLA components, such as the Flexible Mattebox.
Made in 15mm (0.59”) diameter tubular aluminum for strength and reduced weight, 300mm Rods are the longer of SYMPLA’s two sizes. Supplied as a pair, with two 1/2”-13UNC screw junctions included.
SKU: MAN-MVA520W -
Camera rig attachments, brackets and components
SmallRig 3206 Sunhood for Sony Alpha 7S III/Alpha 7C/ZV-1/FX3 Camera
Camera rig attachments, brackets and componentsSmallRig 3206 Sunhood for Sony Alpha 7S III/Alpha 7C/ZV-1/FX3 Camera
1. Dedicated Shading Hood for Sony Alpha 7 IV / A7S III / A7C / ZV-E1 / ZV-E10 / ZV-1F / ZV-1 II / ZV-1 / FX3.
2. Reduces reflections during shooting and shades the screen.
3. Slide-in mounting, fastened by hook & loop.
4. Raised internal edges for stability and to prevent twists.
5. Folded flat for transport and storage.SKU: SRI-3206 -
Camera rig attachments, brackets and components
Wooden Camera Top Plate (Sony FX9)
Top plate specifically for the Sony FX9. Arrays of various mounting points. Can be used with original Sony handle. Sony XDCA-FX9 Extension Unit can also be attached to the rear of the camera without obstruction.
SKU: WOO-54.275100
