LumenRadio CRMX Slim RX RDM IP65

Exalux Connect RX100s is a standalone wireless DMX receiver especially designed to be powered through the USB connectors of a LED panel. RX100s can also run up to 10 hours with the small Exalux PowerBank battery.

RX100s suits with any LED fixture thanks to the flexible connector on cable system.

The slimmer, splash resistant wireless DMX Solution. Enable any legacy fixture with a DMX input to be controlled wirelessly by plugging a Cintenna 2 in receive mode into it. Or use it as a wireless transmitter in a pinch: Using a DMX Male-to-Male Turnaround, plug a DMX output to a Cintenna 2 set to transmit mode. It will be able to transmit up to 512 channels of DMX to any linked LumenRadio CRMX-enabled receivers including other Cintenna 2s set to receive mode. Backwards compatible with early model RatPac Cintenna units and RatPac AKS devices.

*Results vary with previous generation lamps- always test before using.

This is the version with a dual processor and a TimoTwo transmitter.

• “All-in-one” DMX console in StormCase™ casing
• 7” capacitive touch screen 800×480 pixels
• Integrated CRMX LumenRadio™ transmitter
• Integrated Lithium-ion 70 W/h battery
• 14 addressable banks/512 DMX addresses
• Integrated DMX library
  • Including:
    Arri, BB&S, Creamsource, Cineo, DMG, Astera, Quasar science, Carpetlight, Litegear, Kino Flo, Litepanels, Dedolight, Aladdin, Rotolight, clay paky, luxli and more….
• Update of DMX library via USB
• Master setting via linear potentiometer
• Parameter setting via touch screen or buttons
• DMX outputs on XLR 5Pin
• Duration of operation on battery: up to 10 hours.