Proaim Airwave Camera Vibration Isolator Arm (5-15kg) | Customizable for 30kg Payloads
Special Order Item – Please call to order.
Absorbs and Dampens Vibration
Micro-Adjustable Springs and Dampers
For Ronin, Ronin M, and Ronin MX
Mounts on Standard Diameter Speed Rail
Optional Heavy-Duty Spring Set
Included Flight Case
The Proaim Airwave Vibration Isolator Arm supports gimbal rigs from 11 to 33 pounds, reducing vibration from moving platforms to help provide smooth shots taken over challenging conditions. The system features micro-adjustable springs and dampers, allowing you to adjust for the weight of your rig, the speed of your vehicle, and the terrain conditions. It comes with a mounting plate designed for the DJI Ronin, Ronin M, and Ronin MX, but it can also be used with other gimbals. The arm mounts onto a standard speed rail with diameters from 1.5 to 2″. An optional heavy-duty spring set is available to increase the payload supported from 33 to 66 pounds. An included flight case allows you to pack your arm and take it with you.
Related products
-
Arms Articulated/Magic/Friction and Flexible
Manfrotto 196AB-3 Arm Single Articulated 3 Sec Extends to 85cm 1.5kg Payload 2x 16mm Stud 1/4” & 3/8” F
Arms Articulated/Magic/Friction and FlexibleManfrotto 196AB-3 Arm Single Articulated 3 Sec Extends to 85cm 1.5kg Payload 2x 16mm Stud 1/4” & 3/8” F
Single articulated arm with three sections. Top attachment with a 16mm spigot 3/8” light attachment. Bottom attachment with a 16mm spigot (compatible with light attachment Superclamp) with 1/4” thread.
SKU: MAN-196AB-3 -
Arms Articulated/Magic/Friction and Flexible
Avenger D244N Arm Variable Friction T-Handle 3Kg Payload 53cm Long 2x 5/8 stud 3/8 & 1/4 Female
Arms Articulated/Magic/Friction and FlexibleAvenger D244N Arm Variable Friction T-Handle 3Kg Payload 53cm Long 2x 5/8 stud 3/8 & 1/4 Female
The Avenger D244N Variable Friction Arm with large locking T-Knob is one of the most popular arms made by Avenger! Often called a Magic Arm™ the D244N is used for lights, camera and audio applications and is the industry standard for most remote rigging applications. The D244N Variable Friction Arm uses a central friction locking handle to lock all 3 points of the arm in place. The length of the arm is 53 cm/20.87 inch and is capable of holding loads up to 3 kg/6.6 lb. Typically the D244N arm is mounted on to a Super Clamp™ or a gravity cast Super Clamp™ but you can also mount it to light stands and other accessories such as wall plates by using the baby 16 mm/ 5/8 inch pin on either end of the arm. The baby pins on each end of the arms also have a 9.53 mm/ 3/8 inch thread receiver or a 6.35 mm/ 1/4 inch threaded receiver. The remote mounting possibilities of this versatile tool are endless! Recommended Accessories: C1575B, C1550, 125, 147, C155, FF3276, 014-14, 014-38, F301, F831TH.
SKU: AVN-D244N -
Arms Articulated/Magic/Friction and Flexible
Manfrotto 196B-2 Arm Articulated w Bracket Sing Extends to 60.5cm 1kg Payload 2x 16mm Stud 1/4” & 3/8” F
Arms Articulated/Magic/Friction and FlexibleManfrotto 196B-2 Arm Articulated w Bracket Sing Extends to 60.5cm 1kg Payload 2x 16mm Stud 1/4” & 3/8” F
A versatile Single Articulated Arm with telescopic features that make this product even more compact than before. Swivelling arm; each section is separately locked. Length: 23.6′ Comes with removable 143BKT Camera Bracket 2 Section, 5/8′ spigot Bottom attachment: 5/8 spigot with 1/4′ thread (compatible with Superclamp).
SKU: MAN-196B-2 -
Arms Articulated/Magic/Friction and Flexible
Manfrotto 143RC Arm Magic
Your extra arm in the studio. One lever locks three pivot points. Supplied with a quick release camera plate with secondary safety lock based on the 200PL-14 system. Ideal for mounting a camera or a camcorder exactly at the angle you need it. Fits any 5/8” female sockets, works especially well with 035 Super Clamp.
SKU: MAN-143RC
