Dynacore D-TMS Tiny Hot Swap Plate for V-Mount Pocket-Sized Batteries
- Allows Hot Swapping of (2) Tiny V-Mount batteries
- LED Power Indicator for each Battery Position
- Adds 2x D-tap outputs
- Wire-Free internal
- Multiple circuit protection
$250.80
- Net Weight: 0.55kg
- Dimensions:151*104*32.5mm
Related products
-
Battery adapters and DC couplers
Dynacore D-HB26 Safety Adapter V-Lock 26V
Dynacore D-HB26 is a safety adaptor for 26 Volt V-Lock products
This adaptor allows the wiring of your 26 volt batteries to not work if accidentally installed on a 14.4 volt system.
Installing a 26 volt battery accidentally on a 14.4 Volt product will potentially overpower these items causing failure. Using these adaptors mean that you are protected from this happening. Please contact us for further details.
SKU: DYN-D-HB26 -
Battery adapters and DC couplers
Dynacore D-C Multi-Voltage Splitter V-Lock for camera rigs
Dynacore D-C Voltage splitter allows for connection of Multiple devices requiring different voltages on a camera rig.Multi-output adapter designed for DSLR cameras and accessories.
Output Voltage: 5V/7.2V/12V/15V(11V to 17V).
Built-in HDMI distributor, one standard signal input and two standard signal output.
V-Mount ENG batteries are required for the power.SKU: DYN-D-C Mount(With out HDMI) -
Battery adapters and DC couplers
Dynacore D-2BS-24 Converter V-Lock 14.8V input to 24V output
D-2BS/A-24 is a power station designed to utilise two 14.4 volt V-Lock batteries creating a power source outputing power for any device needing 24Volts, such as an LED panel.
It can supply up to 240Watt output (24V, 10A).
Designed to work with equal power batteries where a larger capacity is preferredLCD Display indicates Output Voltage
The unit has a Low Voltage Indicator LED to warn of potential problems shown here:
Color Red=Under/Over Voltage
Color Green=Good
Green Blinking=Battery LowOutput is via 3 Pin Female XLR Output
24V, 10A, 240W(Max)A Hexagon connector can be mounted to a stand using a super clamp or convi clamp.
SKU: DYN-D-2BS-24 -
Battery adapters and DC couplers
Blackmagic Design Blackmagic Pocket Camera Battery Pro Grip
The Blackmagic Pocket Camera Battery Pro Grip adds two extra NP-F570 batteries to the 6K G2 and 6K Pro for over 3 hours of shooting on a single charge. That’s a massive battery life, in a compact design that integrates seamlessly with the camera. Featuring a unique carbon fiber design, non‑slip hand grips, and a slide out tray, the battery grip makes long shoots easier because it gives you more to hold onto. You can view the status of the grip’s batteries on the touchscreen display, and charge the batteries via the camera’s 12V DC power connection in between takes!
SKU: BLA-CINECAMPOCHDXBT2 -
Battery adapters and DC couplers
Dynacore D-AS Gold Mount to V-Lock Adaptor
It may convert the Gold Plate to the V-Lock bracket. It offers a solution to allow the use of V-lock batteries on Gold mount cameras.
It can also be used as a charge adapter, enabling you to charge V-lock batteries on Gold mount chargers.
- Lock V-Mount battery to the V mount side of the D-AS, then the battery converts into AB mount.
- Lock Gold Mount side of D-AS with the camera, then the battery ready to work.
Weight: Approx 0.15Kg
Dimension: 124×97×40mmSKU: DYN-D-AS
