Nanlite PavoTube II 30C RGBWW 4ft LED tube 2 kit

This kit includes 8 x of Astera’s most powerful batons in the Titan version. Supplied in a charging case that allows you to charge all of the fixtures at once while storing and protecting, Titan is the ultimate LED tube for filmmakers, TV studios and any creative person. It emits powerful, tuneable white with ultra-high colour rendering as well as coloured light which can be applied to individual pixels or the whole tube. The Titan tube offers unlimited range of potential including indoor and outdoor use, AC-powered or on battery, on the go with the Astera app, with wired or wireless DMX.

Voyager combines a light source, battery and remote controller into one system. Any number of Voyagers is easy to set up and control with the help of a phone, tablet or computer. Voyagers’ software platform is continually growing with a selection of shaders and features, such as automatic detection or video streaming. Voyagers come in two sizes: 2 FT, with 40 individually controlled RGBW pixels and 4 FT, with 80 of them.
With the Voyager, it is possible to use your favourite diffusion filter. There are two slots to install the filter. The first layer is inside the diffuser tube. The second layer is right over the LEDs, and the cutout strip mounts right into the groove around the LEDs.

Let your creativity run wild with these LED tubes. Put a splash of colour onto a background, or light up your subject with a specific hue. The PavoTubes feature 0 to 100% dimming with maximum illumination of 2850 lumens at 5600K, as well as a full spectrum RGB and pre-programmed special lighting effects. With the colour temperature adjustable from 6500-2700K, a CRI of 98 and a TLCI of 95 this RGB LED tube exceeds most studio lighting needs. It also features a choice of over 360 static light colours on the RGB spectrum and can cycle through the entire spectrum at a speed of your choice. With six pre-programmed special effects in a simple-to-use menu system, this NanLite RGB light tube makes it easy to create lighting scenes that can otherwise be difficult to replicate.

At the touch of a button, you can output the red and blue flash of a police car, a flickering flame (candlelight), the flash of a lightning storm, the Flicker of a TV screen, the flicker of a dying light bulb. and an SOS signal. Each of the special effects has many different settings to help you adjust it and create the exact effect you need, as well as a built-in LCD panel showing you exactly what settings you’re using, making it easy to fine-tune and then recreate them in future. With easy-to-use dials and buttons built into the light tube, as well as built-in 2.4GHz radio control and master/slave functions, this RGB tube light is versatile enough to fit right into your existing set up without needing a lot of extra preparation.