SmallRig Data Cable for DC5521 to NP-FW50 Dummy Battery 2921

It may convert the Gold Plate to the V-Lock bracket. It offers a solution to allow the use of V-lock batteries on Gold mount cameras.

It can also be used as a charge adapter, enabling you to charge V-lock batteries on Gold mount chargers.

1. Lock V-Mount battery to the V mount side of the D-AS, then the battery converts into AB mount.
2. Lock Gold Mount side of D-AS with the camera, then the battery ready to work.

Weight: Approx 0.15Kg
Dimension: 124×97×40mm

D-2BS/A-24 is a power station designed to utilise two 14.4 volt V-Lock batteries creating a power source outputing power for any device needing 24Volts, such as an LED panel.
It can supply up to 240Watt output (24V, 10A). 
Designed to work with equal power batteries where a larger capacity is preferred

LCD Display indicates Output Voltage

The unit has a Low Voltage Indicator LED to warn of potential problems shown here:
Color Red=Under/Over Voltage
Color Green=Good
Green Blinking=Battery Low

Output is via 3 Pin Female XLR Output
24V, 10A, 240W(Max)

A Hexagon connector can be mounted to a stand using  a super clamp or convi clamp.

Attach a pair of NPF batteries to extend the runtime of your Pavotube 15C or 30C.

The Nanlite BT-BA-SNP/DC can be easily mounted to a light stand or boom, and provide power to a high mounted Pavotube or Forza. The 15V DC output is designed for the Pavotube 15C, and Pavotube 30C, Forza 60, and Forza 60B.

A pair of NPF970 batteries mounted onto this adaptor will provide 88Wh of capacity. That is nearly as much as a small (98Wh) V-Mount battery.