Tilta Armor man 3.0 Overhead Configuration Cable Pulley
This pulley attachment slides onto the Armorman 3.0’s mechanical arms when using the overhead configuration. It allows you to attach an extendable bungee cable to each arm so that you can grab onto and provide support for your gimbal from over the top of your camera setup.
$149.00
Related products
-
Stabilisers
Manfrotto MVGFF Follow Focus for Manfrotto Gimbals 220&460
Manfrotto Follow Focus for Gimbal is the perfect accessory for Manfrotto Gimbals, MVG220 and MVG460. It allows you to precisely control focus using the multi-function knob, making shooting easier and more accurate.
Based on a brushless motor and high-precision intelligent chip, this follow focus for gimbal controls the motor rotation and gives you real-time tracking in a few simple steps :1- Fix the lens gear to the camera’s focus ring position
2- Fasten the fixed bracket to the quick release plate of the Gimbal with a hexagonal screw, and insert the aluminium tube.
3- Insert the follower into the aluminium tube and lock the fixed thumb screw on the follower. Move the aluminium tube to adjust the front and rear position to make the follower gear and the lens gear engage, and lock the fixed thumb screw on the fixed bracket.
4- Insert the data cable into the USB port of the fixed plate and the installation is complete.
SKU: MAN-MVGFF -
Stabilisers
Manfrotto MVG300XM Professional 3-Axis Modular Gimbal up to 3.4kg
Manfrotto Modular Gimbal MVG300XM is a professional 3-Axis Stabilized Handheld Modular Gimbal. The handle can be easily detached to be used as a remote control and allows the gimbal to be used in combination with many different types of support.
Designed for CSC and DSLR cameras*, it can support up to 3.4 kg / 7.495 lbs and is perfect for videographers looking for versatility and modularity.The Gimbal handle features a LCD touch screen allowing easy choice of settings. A joystick enables straightforward operation of gimbal movements, while a multifunction knob provides greater control and focus control*.
When the handle is detached, it allows the gimbal to be controlled remotely and thanks to the integrated gyro, the handle movements can be mimic.
Balancing is made easier with a position memory red dot on both the vertical and cross arms.
300XM Gimbal offers different shooting modes including:
– Timelapse
– Inception
– Panorama
– Portrait
– SelfieIt is also supplied with a removable rear versatile handle that can be used for better support, especially when shooting at different angle. Also included a mini tripod for easy camera installation and balancing.
A dedicated Manfrotto Gimbal 300XM App is available for simple control of your gimbal and allow some functions to be performed remotely.
To prevent shaking and for easy transportation, the motor is equipped with independent locking for each axis.
*Please check the camera compatibility chart in the Downloads section.
SKU: MAN-MVG300XM -
Stabilisers
Manfrotto MVGEXT Extension in carbon fibre for Manfrotto Gimbals
The Carbon Fiber extension is a 257mm/10 inches pole that can be attached to the base of your gimbal.
It is a compact, portable and lightweight accessory that improves your shooting experience, increasing flexibility and versatility. Quick and easy to attach, it allows you to explore a wider range of perspectives and creative angles.
It is compatible with most of the gimbals available on the market, thanks to ¼-inch threaded studs and threaded holes on the top and bottom of the handle.SKU: MAN-MVGEXT -
Stabilisers
Manfrotto MVGBF-CFAC Gimboom accessory connector
Gimboom accessory connector is specifically designed for the revolutionary Gimboom, the fast boom by Manfrotto, allowing the addition of external accessories such as monitors or audio equipment to Gimboom.
It allows users to keep their focus on framing even when the Gimboom is fully extended and the camera display is too far away for the user to see the display. It offers a safe, solid and effortless attachment for any 3/8” threaded accessory, with an anti-rotation geometry to make it perfect for the 244 microarm.
Thanks to the dedicated knob, the one-hand attachment is easy to use even when the gimbal is mounted.
SKU: MAN-MVGBF-CFAC -
Stabilisers
Manfrotto MVGBF-CFSSKIT Gim-Pod accessory
Gim-Pod is specifically designed for the revolutionary Gimboom, the fast boom by Manfrotto, allowing users to instantly switch from a Gimboom to a tripod, creating the ultimate lightweight travel kit for dynamic users.
It’s dedicated to everyone who needs a multi-application photo and video solution in one piece of equipment, allowing you to shift from a boom to a tripod in a few seconds.
The Gim-Pod accessory includes a universal 3/8” thread connector for adding external accessories such as monitors or audio equipment to a Gim-Pod, and dependable, three-section aluminium legs made from anodized and CNC-machined aluminium for greater durability and a compact size. It can take a payload of up to 6.5kg/143.3lbs, and thanks to a dedicated knob, the one-hand attachment is easy to use, even when the stabilizer is mounted
With its twist-locking legs system and slimline design (only 7cm/2.76in), the Gim-Pod’s closed down length doesn’t exceed the Gimboom’s, making it super easy to store and carry with you anywhere you want to go.
This is a really fast solution that enables users to switch from a moving usage to static tripod-based shooting, allowing you to remotely control your Gimbal or mount a photographic head without having to detach the camera rig.
SKU: MAN-MVGBF-CFSSKIT
