Tilta Armor man 3.0 Support Vest

If you have a ring-based gimbal, the Overhead Configuration Gimbal Ring Adapter Clamps allow for an easy quick release solution to attach and detach your gimbal to the Armor Man 3.0’s mechanical arms when in the overhead operating mode. The clamps attach to the left and right sides of the top of the gimbal ring and then after the Overhead Configuration Cable Pulleys are attached to each of the Armor Man’s arms, the operator can simply use the carabiners of the extendable bungee cables to attach to the gimbal to then start operating. When you want to detach the gimbal, simply release the carabiners off of the clamps.

Manfrotto Follow Focus for Gimbal is the perfect accessory for Manfrotto Gimbals, MVG220 and MVG460. It allows you to precisely control focus using the multi-function knob, making shooting easier and more accurate.
Based on a brushless motor and high-precision intelligent chip, this follow focus for gimbal controls the motor rotation and gives you real-time tracking in a few simple steps :

1- Fix the lens gear to the camera’s focus ring position

2- Fasten the fixed bracket to the quick release plate of the Gimbal with a hexagonal screw, and insert the aluminium tube.

3- Insert the follower into the aluminium tube and lock the fixed thumb screw on the follower. Move the aluminium tube to adjust the front and rear position to make the follower gear and the lens gear engage, and lock the fixed thumb screw on the fixed bracket.

4- Insert the data cable into the USB port of the fixed plate and the installation is complete.

MOVE is the first quick-release system to help increase your pace on set and make switching set-ups effortless.

It is designed to reduce downtime when switching between tripods, motion control gear, and stabilizers in fast paced, creative environments.

At the core of this revolutionary system is a flat base and plate set-up that creates a universal connector.

The plate is made of hard anodized, machined aluminum and thanks to its standard 3/8”and 1/4” top attachment screw ensure a unique versatility to be mounted with a wide range of products.

This innovative plate combines practicality with high performance, it features a grub screw (antirotation pin) to guarantee a strong connection with any supports, stabilizers or motion control where mounted and a dedicated 1/4” adapter seat to always bring 1/4” adapter with you.

The Move plate’s design makes it extremely easy to set up and lock your camera in any configuration.