The Miller Combo Pedestal for 100mm fluid heads s a compact, portable pedestal system for 100mm ball fluid heads. The pedestal features a load capacity of 30kgs, a 35cm stroke, and an adjustable air column system with a height range of 90 to 125cm. The large 12cm wheels move smoothly and are fitted with individual brakes. This sturdy system features a quick column lock, an 29cm steering wheel, and adjustable cable guards. The Combo Pedestal System is simple and easy to set up, and it incorporates a carry handle on its dolly.
Miller Combo Pedestal for 100mm fluid heads
Compact and portable with carry handle for dolly.
Wide height range 900mm (35.4?) up to 1250mm (49.2?).
Simple and easy to set up and use.
Air adjustable column system for quick payload balancing.
Quick action column lock.
Smooth 350 mm (13.8?) stroke.
Independent 125 mm (4.9?) dolly wheel brake system.
Sturdy adjustable cable guards.
Steering wheel diameter 294 mm (11.6?).
Dolly tracking width 920 mm (36.2?).
A portable hand pump is not included.
$5,746.00
Related products
-
100mm+ Legs
Miller 402G Toggle 2 Stage Alloy Tripod Legs
0 out of 5(0)Built for maximum torsional strength, high versatility and compact storage, the 402G 2-stage, 100mm, Toggle tripod is a proven workhorse used extensively worldwide. Constructed from lightweight alloy and employing single twist positive leg locks, the 402G 2-stage Toggle tripod is quick to set up and pack away after the shoot.
Employing flexible, adjustable spreader arms ground spreader, with pullover rubber stirrups, 402G is a reliable workhorse, requires minimal maintenance and can be used on even and semi even ground.SKU: MIL-402G$1,016.00 -
100mm+ Legs
Miller Combo Live 30 Pedestal to suit 100mm fluid heads
0 out of 5(0)Compact and portable with carry handle for column & dolly.
Wide height range 810mm (31.8?) up to 1690mm (66.5?) with extension (opt.).
Precise, smooth and low noise in-shot column with 450mm (17.7?) stroke.
Simple and easy to setup and use with drag control knob pressure column and lock lever pressure column.
Air adjustable column system for quick payload balancing.
Independent dolly wheel axle brake system eliminates wheel tyre indents.
Multiple wheel positions for linear or radius dolly tracking.
125mm (4.9?) dual ball bearing wheels for quick swivel-turn action.
Centre hub locking column with adjustable spider arm supports.
Steering wheel diameter 294mm (11.6?).
Dolly tracking width 970mm (38.2?).
Sturdy adjustable cable guards.
Portable hand pump with pressure gauge.SKU: MIL-3220$8,349.00 -
100mm+ Legs
Benro Aluminium 100mm Video Hi-Hat 2
0 out of 5(0)The Benro 100mm Hi-Hat is a versatile video production tool that allows for unique camera placement and comes in a portable package. This aluminium leg/magnesium bowl hi-hat can be placed low to the ground, on stairs or even secured to a wooden board.
The small footprint allows the hi-hat to be used in tight spaces and on smaller surface areas. Each leg can be independently positioned at one of the three locks located on the outside of the bowl. In addition, each leg features oversized rubber twist locks and is telescoping for adjusting the height. When you combine these two features, you can easily set up the hi-hat for use on uneven terrain and even stairs.
The 100mm version will accept a 100mm video head and includes a 3/8″-16 low profile tie down adapter for getting low to the ground shots. You can add a 100mm half-ball adapter (BL100) to mount any standard 3/8″-16 flat base video head or photo head. The large rubber feet are attached to a metal ball joint for quick positioning, which can be removed for attaching the included metal spiked feet. The feet also have pre-drilled holes for securing to wooden octagon boards when using on top of apple boxes or securing the board to the top of a ladder. There are three accessory mounts on the outside of the bowl come in handy for attaching monitor arms. Each 3/8″-16 male to ¼”-20 female insert can be used to convert any standard ¼”-20 screw to 3/8″-16 in addition to being removed for attaching 3/8″-16 accessories.Transporting the hi-hat is easy with the included carrying case.
SKU: BEN-HH100AV$431.00$457.00 -
100mm+ Legs
Miller HD150 1-Stage Tripod Legs
0 out of 5(0)HD tripod series is built for those who demand the highest levels of stability and strength from their tripods.
Featuring adjustable flip locks for quick setup and easy maintenance, the 943, 150mm tripod is built with the strength and torsional rigidity to take the full workload in extreme climates and environments.
The heavy-duty 24mm alloy tubing coupled with precision CNC machined tripod bowls deliver stability, reliability and durability. Adjustable precision flip leg locks mean effortless set-up and easy maintenance. The impact resistant leg locks are designed to provide positive and secure clamping every time.
No matter where your work takes you the HD tripod series performs in extreme climates and terrains every time.Feet and spreader sold separately
SKU: MIL-943$1,820.00 -
100mm+ Legs
Manfrotto 528XB 528XB Pro Video Heavy Tripod
0 out of 5(0)The 528XB is the ideal location tripod, with a massive 110 lbs (50kg) load capacity. It is a sturdy single-stage tripod with a single-tube leg structure. Tubes are made of stainless steel for strength under heavy loads, and aluminum for weight saving. The leg spread is fully adjustable, but also incorporates a 30° locked position for faster set up and greater strength. A 100mm bowl accepts industry-standard half-ball video heads and allows you to level the head quickly for accurate panoramic shots. The included claw ball allows you to use it with heads not equipped with a half ball. The 528XB includes a versatile mid-level spreader, which has telescopic ”ratchet” braces that click into place in each of the preset positions for faster deployment. Each brace can be individually set, allowing each tripod leg to be separately positioned.
SKU: MAN-528XB$1,810.00