The Miller CX10 Solo-Q 100 2 Stage Carbon Fibre Tripod System features the 100mm ball base CX10 Fluid Head and the Solo-Q 100 2-Stage Carbon Fiber Tripod, which has a lightweight and user-friendly design for the single-camera operator who frequently changes setups on the go. The kit also includes a soft case designed in a triangular shape with an extra-wide opening for easy access. The head supports 0 to 12kgs and has a sliding sideload plate. It offers 16 steps of counterbalance and 5-step pan/tilt drag plus zero. The tripod provides a wide height range from a very low 24 to 163cm. It has twist locks, adjustable leg angles, and spiked and rubber feet.
Miller CX10 Solo-Q 100 2 Stage Carbon Fibre Tripod System
Affordable, Stable, Robust.
100mm ball levelling.
Perfect for payloads to 0-12kg (26.4bs).
15+0 CB Plus selectable counterbalance positions.
Ergonomically located CB Plus switch.
5+0 selectable positions of fluid pan and tilt drag.
2-stage rapid leg lock extension.
Q-Lock for rapid set-up and stowage.
Lightweight carbon fibre legs.
Comes with a 2-stage tripod bag.
3 year warranty.
$3,766.00
Related products
-
100mm+ Systems
Benro BVX Carbon Fibre Video Tripod 25kg PL
0 out of 5(0)The Benro BVX25CFK is a professional heavy-duty carbon fiber video tripod and head combination. The BVX25H video head supports up to 55 lb (25 kg) and the 100mm bowl tripod has a maximum load capacity of 132 lb (60 kg).
There are 16 individual steps of counterbalance allowing you to dial in the right amount of counterbalance required for each setup. Each step is repeatable which helps save time when changing lenses or adding accessories. The pan drag and tilt drag mechanisms each provide 6 individual steps (1-6) of drag adjustment to help fine tune the smooth movements.
A sliding top plate with a snap-in style quick release can be shifted forward or backward to help properly balance your camera rig. The QRX25 camera plate comes with one ¼”-20 camera screw and one 3/8”-16 camera screw. An extra set of camera screws is included on the sliding platform.
The carbon fiber tripod is a 2 stage, 3 section tandem style which incorporates a 100mm bowl. The leg locks are oversized levers that can be operated while wearing gloves. The lower stage leg lock lever has an additional lip, which can be opened and closed with your foot. This allows you to hold onto your camera rig while adjusting the height of the tripod. Each tripod includes a floor spreader, a telescoping pan arm and a padded carrying case.
SKU: BEN-BVX25CFK -
100mm+ Systems
Miller ArrowX 3 Sprinter II 2 Stage Alloy Tripod System With Ground Level Spreader
0 out of 5(0)The 3038 Alloy, Sprinter II, 2-stage Arrowx 3 system, fitted with ground spreader is designed for speed of setup, high level of stability and flexibility of payload, is best suited for level terrain.
Featuring a wide payload range, precision fluid drag and Miller’s innovative 16 position CB Plus™ counterbalance system, Arrowx 3 delivers the flexibility, speed of set up and accuracy of shot, professionals expect and demand.
1-19kg (2.2-41.8lbs) payload range and 5 + 0 selectable pan-tilt fluid drag positions make Arrowx 3 ideal for news gathering and documentaries, enabling it to be used with a wide range of cameras, lenses and accessories.
The Arrowx 3 is matched with the 2 stage Sprinter II (alloy) tripod and ground spreader to give incredible speed of set up and incredible height range.
Gone are the days where you have to carry two tripods to use large and small cameras on the same shoot.SKU: MIL-3038 -
100mm+ Systems
Miller CX10 Toggle 2 Stage Alloy Tripod System With Ground Spreader
0 out of 5(0)The 3753 CX10 Toggle 2-stage (alloy) tripod system with a robust 100mm ball levelling fluid head designed for users needing the stability that comes with 100mm tripods, cost effectively.
CX10 employs CB Plus technology providing 16 positions of counterbalance and 5+0 levels of pan and tilt settings of Miller’s fluid drag with 60mm of camera plate travel, enabling you to easily select the perfect settings to match your configuration for ultimate camera control.
The CX10 is matched with the 2-stage Toggle (alloy) tripod and on-ground spreader to provide a large height range 543-1713mm (21.4-67.4″), positive leg toggle locks and quick pack down.SKU: MIL-3753 -
100mm+ Systems
Sachtler Tripod System 25 EFP 2 CF 150mm
0 out of 5(0)Comfortable with payloads up to 35 kg, the Sachtler Video 25 Plus is a remarkably lightweight studio and outside broadcast fluid head. A seven-step clamping system means that you be sure your shots won’t ever suffer from unwanted jerks and vibrations. The 18-step counterbalance system lets you concentrate on getting the perfect shot, knowing that your camera is always securely positioned and protected from tipping.
The days of fumbling around with clumsy attachments are over, with Touch & Go quick release and automatic locking for speedy mounting and removal. Sachtler’s frictionless leak proof fluid damping with seven levels of drag helps with smooth panning and there’s a sliding balance plate too. Designed to guarantee high performance in any kind of shooting environment, and in any lighting conditions.
This dual extendible 150 mm tripod’s lightweight doesn’t come at the expense of stability or carrying capacity. A carbon fibre construction, 22 mm (0.87”) diameter and 4.1 kg weight mean that you won’t be wasting energy or space carrying this tripod to any location. Supporting up to 95 kg without a loss of stability, the 150 EFP 2 CF’s double extension gives you an extended height of 161 cm.
This versatility is enhanced by the quick clamping system that locks the legs in position in seconds by releasing a single catch. Whatever the conditions and whatever your schedule, the 150 EFP 2 CF is always ready to go. The one-piece Carbon fibre design means this durable, twist and corrosion resistant tripod will be a trusted and reliable part of your gear for years to come. The 150 EFP 2 CF is suitable for long-term use in any environment.
SKU: SAC-2512 -
100mm+ Systems
Miller CX10 Toggle 2 Stage Alloy Tripod System With Above Ground Spreader
0 out of 5(0)The 3756 CX10 Toggle 2-stage (alloy) tripod system with a robust 100mm ball levelling fluid head designed for users needing the stability that comes with 100mm tripods, cost effectively.
CX10 employs CB PlusTM technology providing 16 positions of counterbalance and 5+0 levels of pan and tilt settings of Miller’s fluid drag with 60mm of camera plate travel, enabling you to easily select the perfect settings to match your configuration for ultimate camera control.
The CX10 is matched with the 2-stage Toggle (alloy) tripod and above-ground spreader to provide a large height range 543-1713mm (21.4-67.4″), positive leg toggle locks and the versatility of using the system across all terrains.SKU: MIL-3756