This Battery Charger from Godox is a replacement for the one that comes with your V350 flash. It is designed for the VB20 lithium-ion battery, charging it fully in approximately 2.5 hours. On the front are five LED indicators that conveniently display the battery level and show whether the charger is receiving power.
Godox C20 Charger For WB20 Lithium Battery For V350
Replacement or Spare Part
Recharges Battery Fully in 2.5 Hours
Five LEDs Show Power and Battery Level
Made to work with Godox VB20 battery
$28.46
Related products
-
Battery adapters and DC couplers
SmallRig NP-F Battery Adapter Plate Lite for BMPCC 4K, 6K – 3093
0 out of 5(0)1. The plate fits Sony NP-F type batteries to provide greater battery life for BMPCC 4K & 6K.
2. It provides different output ports, including a 12V DC output port and a 7.4V DC output port.
3. LED indicator for low battery warning.
4. Rubber pads on the bottom for a more stable installation.
5. Two Charging Cables – LP-E6 Dummy Battery Cable and a DC to 2 Pin LEMO Cable.SKU: SRI-3093$75.00 -
Battery adapters and DC couplers
Tether Tools Case Relay Camera Power System
0 out of 5(0)- Continually power your camera with USB battery packs
- Hot swap batteries mid-shooting with no downtime
- No need to purchase multiple camera batteries
- Compatible with most camera brands
- Can be adapted to work with D-Tap batteries; use D-Tap to USB Converter
- More cost effective than purchasing multiple proprietary camera batteries
- Power sources are non-proprietary. Power your camera with the same 5V battery you use to charge phones or tablets.
- Never need to charge camera batteries again. And never run out power.
- A Relay Camera Coupler (sold separately) is required to use Case Relay External Power System.
SKU: TET-30.CRUPS110$215.00 -
Battery adapters and DC couplers
Dynacore D-C Multi-Voltage Splitter V-Lock for camera rigs
0 out of 5(0)Dynacore D-C Voltage splitter allows for connection of Multiple devices requiring different voltages on a camera rig.Multi-output adapter designed for DSLR cameras and accessories.
Output Voltage: 5V/7.2V/12V/15V(11V to 17V).
Built-in HDMI distributor, one standard signal input and two standard signal output.
V-Mount ENG batteries are required for the power.SKU: DYN-D-C Mount(With out HDMI)$220.00 -
Battery adapters and DC couplers
Jupio ProLine V-Mount Adapter plate for 2x Sony NP-F Series Batteries
Battery adapters and DC couplersJupio ProLine V-Mount Adapter plate for 2x Sony NP-F Series Batteries
0 out of 5(0)- V-Mount Adapter plate allows you to use 2 x Sony NP-F series batteries
SKU: JUP-BVM0250$44.00 -
Battery adapters and DC couplers
Tether Tools Case Relay Camera Coupler CRN5B for Nikon
0 out of 5(0)- More cost effective than purchasing multiple proprietary camera batteries
- Power sources are non-proprietary. Power your camera with the same 5V battery you use to charge phones or tablets.
- Never need to charge camera batteries again. And never run out power.
- Compatible with most Canon, Nikon, Sony, Panasonic, Fujifilm, and Olympus cameras. Check to confirm your camera model is supported.
- A Case Relay Camera Power System (sold separately) is required to use the Relay Camera Coupler.
SKU: TET-30.CRN5B$59.00