Featured categories
Your Recently Viewed Products
Manfrotto 190LC Levelling Centre Column for the new 190 series
The new Levelling Column allows quick levelling of photo or video heads without the need for time-consuming adjustments to the length and angle of each single tripod leg.
Thanks to the levelling half ball mounted at the top of the tripod’s centre column, the top plate angle is now independent from the rest of the tripod. The half ball is locked and unlocked via a turning grip on the bottom of the centre column. The half ball-mounted plate has a 3/8” male screw for attachment to a photo or video head, and a bubble spirit level for even easier use.
Manfrotto 175F-2 Cold Shoe Spring Clamp
The 175F-2 Manfrotto Cold Shoe Spring Clamp is a versatile lightweight clamp that enables the user to safely and securely position key accessories in off camera locations that would not always be possible using a traditional support solution such as a lighting stand. The clamp features a number of useful fixing points allowing the user to attach essential lightweight accessories such as a Speedlite flashgun, a small LED panel or an audio mic.
Weighing in at only 350g the clamp incorporates an extremely strong spring mechanism which ensures a tight grip on a range of different surfaces or objects, boasting a payload of up to 2kg. The clamps jaws extend to accommodate a maximum diameter of 40mm allowing it to easily attach to a pole, a shelf, the back of a chair or even the branch of tree to name just a few of the many possibilities. The inside of the spring clamps jaws feature a number of durable hard rubber studs which provide further grip, particularly useful on irregular shaped surfaces.
Fixed to the clamp is a reliable, multi position Manfrotto centre ball head with full pan and tilt movement. Once the clamp is attached to the chosen surface, a single locking knob on the ball head then allows the user to precisely position the accessory at the correct angle and with a simple twist lock it firmly in position. On top of the ball head is Manfrotto’s highly acclaimed shoe mount mechanism. This unique mount allows the user to easily and securely, fasten their chosen accessory to the ball head. Simply unscrew the ring to open the shoe, slide in the accessory, then tighten the ring to lock it firmly to the ball head.
In addition to the ball head, the clamp also features a 5/8” (16mm) socket and a 5/8” (16mm) spigot with 3/8” female thread providing the option to attach an additional accessory or for the clamp to be attached to a light stand or support arm. This extremely versatile clamp is sure to capture the imagination of today’s creative imagemakers. Its compact form factor, super-fast set up time and clever design makes it easier than ever to place essential accessories in a range of off camera locations whether it be up high, at ground level, hidden out of sight or in confined spaces, opening up a whole host of creative opportunities.
An essential ‘go to’ accessories that should be part of any imagemakers kit bag.
Audio Implements PO-4.7K Receiver (4.7K Ohms)
Audio Implements supply the television and security industries with IFB Earpieces and/or listening devices for use in motion picture, television or surveillance applications. The PO-4.7 is a 4.7K Ohm Transducer (Magnetic Receiver). All Transducers have metal 1/4 nubbins and metal base for long life. * AudioClarifier, Receiver Cord and Eartips sold separately.
Avenger AV-I1023 Avenger Flag Cutter 101.6 x 101.6 cm/40 x 40 in Square
The Avenger I1023 Cutter is a 40 x 40 in/101.6 x 101.6 cm square flag made using black commando fabrics. Flags are designed to control light whether the light is natural or artificial. Flags are used to control spill from other lights or keep light from hitting areas where light is not wanted on sets, in studio or on location.
The built in 3/8 in/10 mm mounting pin allows for easy connection to Avenger grip heads, grip arms and C-Stands. Flags are a great tool that can be used to protect cameras and lens from unwanted flare too!
All Avenger flags, floppies and cutters are made using a strong webbing all around the frame to protect the edges from wear and the frames are a black powder coated mild steel.
Recommended Accessories: A2030DKIT, A2030DCBKIT, A2033LKIT, A2033FKIT, A2033FCBKIT, D200, D200B, D520L, D500L, AVCSA1301B, A5029
Chauvet DJ Slimpar T12 BT Tri Colour LED Par Can with Bluetooth
Chauvet DJ Slimpar T12 BT
The Chauvet DJ Slimpar T12 BT is a versatile LED parcan with integrated Bluetooth making controlling the light easier than ever. Simply connect via your favourite Bluetooth enabled smartphone or tablet device with the BTAir app and access the full control of the light without any additional hardware needed. The SlimPAR T12 BT features 12 tri-colour (RGB) LEDs that deliver a vibrant colour wash and its compact design easily fits inside sticks of truss making it perfect for truss warming. An optional IRC-6 remote can also be used for control as well as DMX, automated and sound-activated programs. Compatible with BTAir.
Shimoda Action X30 V2 Starter Kit – Army Green
Hidden AirTag pocket
Dual laptop pockets (the front pocket on the back has been lightly padded to better protect a larger laptop when needed)
Adjustable waist belt, which can be adjusted both smaller and wider than our previous belt
Base handle
Luggage pass-through handle
Larger phone pocket on the harness strap
Removable tripod / water bottle pocket
Rain cover and storage pocket in base
Avenger F830RH Adaptor Baby to Jnr Swivel Pin Ball Socket Ratcheting Handle

Avenger F830RH Adaptor Baby to Jnr Swivel Pin Ball Socket Ratcheting Handle
Avenger AV-F830RH Adaptor Baby to Jnr Swivel Pin Ball Socket Ratcheting Handle.
– Load Capacity: 28.6 lb – Weight: 2.4 lb – Zinc Steel Construction – 5/8″ Receiver, Male 5/8″ Pin – Ball in Socket Joint – 180? Tilt Range – Large Ratcheting Handle