Bags, cases, covers, setwear and straps
Showing 271–285 of 1547 results
-
Shoulder, sling and carry bags
Domke F-8 Small Shoulder Bag/Olive
Indent Item
The olive F-8 Domke Small Canvas Shoulder Bag is made to carry a small DSLR camera kit consisting of one or two camera bodies, two to four lenses, a flash unit, and accessories. The bag can be customized by using the included removable, padded partition wall. There are five pockets, including an upside-down zippered pouch inside the weather flap. The bag is carried by an adjustable shoulder strap.
Key Features
Durable, lightweight, water-resistant cotton canvas bag designed to carry a small DSLR camera kit
Open-cell foam liner in bottom adds cushioned support
Up to two compartments, depending on how the removable padded partition wall is utilized
Street-tough hardware
Adjustable, removable shoulder strap
Pockets
Two exterior open pockets
Two touch-fastener pockets on the side
Upside-down zippered pouch inside the weather flapSKU: DOM-700-80D -
Shoulder, sling and carry bags
Domke F-8 Small Shoulder Bag/Ruggedwear Brown
Indent Item
The brown F-8 Small Shoulder Bag – RuggedWear from Domke is a quality shooter’s bag designed with a distressed patina finish that improves with age. It’s designed to carry a host of photo gear including one to two cameras, two to four lenses, a flash, and accessories.
The F-8 RuggedWear is made of water-resistant canvas material coated with waxes and oils. The fabric produces a unique distressed and weathered look. The open-cell foam construction on the bottom adds cushioning for additional protection when the bag touches the ground. The fabric has been manufactured with Domke’s special non-solvent waxes and oils that provide long-term protection from harsh weather. The breathable fabric ages well but can be restored to its original look with the use of the included refinishing wax.
Inside the bag is a removable partition for organizational purposes. Its three interior compartments and five pockets deliver excellent storage and additional organizational capabilities, for rapid access to the gear you need at a specific time. The renowned Domke Gripper Strap is tough and runs completely around the bag. The front flap protects the interior from water and is secured with Domke’s traditional metal clip.
Dual side pockets are secured with touch fasteners and contain enough space for accessories, like a flash or light meter. There’s an additional zippered pouch stashed within the front weather flap. Domke’s hardware is made for tough day-after-day use, in a bag that is extremely lightweight at a mere 1.4 lb. If the bag gets dirty, it can readily be cleaned with a hose, damp cloth, or soft scrub brush. Saddle or flake soap also works well. Domke does not recommend machine washing the bag.
The name Domke is synonymous with bag quality. Their bags have graced the shoulders of photojournalists from all four corners of the planet for decades. Backed by a two-year warranty, the F-8 delivers quality and functionality that underscore the Domke reputation.
Eight compartments and pockets, plus Domke’s trademark “upside-down” zipper pouch inside the weather flap
Durable water-resistant, breathable cotton canvas
Removable, padded partition wall included
Adjustable non-slip Gripper Strap runs completely around the bag
Street-tough hardware
Open-cell foam liner on bottom adds cushioned support
Lightweight design
Accessible and ample
Carry-On Form Factor
FAA and airline carry-on specifications are subject to change without notice; please check with your airline before designating this case as a carry-on item. Most airlines require carry-on items to have an external linear measurement that is equal to or less than 45″. The external dimensions of this case add up to 21.25″.SKU: DOM-700-80A -
Shoulder, sling and carry bags
Domke F-802 Reporter’s Satchel/Black
Indent Item
The Domke F802 Reporter’s Satchel (Black) is a multi-use satchel made to carry various types of imaging equipment. It is made of waterproof cotton canvas with padded side walls. There is a flexible compartment, 2 large expandable cargo pockets with individual weather flaps and 2 full length slip pockets. The flap has two flat zippered pockets on the front. The satchel has an adjustable Gripper shoulder strap sewn completely around satchel and a reinforced handle that is box-stitched to top of bag.
Construction
Waterproof cotton canvas
Padded side walls
Rigid top panel
Metal snap hook closure
Flexible compartment holds equipment
Pockets
Two zippered pockets on flap
Two expandable cargo pockets with individual weather flaps under flap
Two full length slip pockets
Carrying options
Adjustable Gripper shoulder strap sewn completely around satchel
Reinforced handle is box-stitched to top of bag.SKU: DOM-701-82B -
Shoulder, sling and carry bags
Domke F-803 Camera Satchel/Black
Indent Item
Store, transport, and protect your DSLR or mirrorless camera, lens, flash, and related accessories with the black Domke F-803 Camera Messenger Bag. This handsome bag looks like a regular messenger bag versus a camera bag full of expensive gear, and the padded interior compartment has a touch-fastening divider to organize your kit. For style and protection, the bag is constructed from cotton canvas treated with a waterproof coating. Five pockets, two of which are large expandable cargo pockets, hold smaller items such as a flash, filters, a wallet, phone, and more. Carry the bag with the wide, adjustable Gripper shoulder strap or with its reinforced top handle.
SKU: DOM-701-83B -
Straps and harnesses
Domke FA-031 U.S.P.O. Shoulder Pad
Indent Item
The Domke FA-031 U.S.P.O. Shoulder Pad is an ergonomically designed pad that is made of thick foam rubber on a tough leather backing. This pad is identical to the shoulder pad used by letter carriers with the addition of touch fastener tabs which adjusts to fit straps up to 2.75″ wide. The newly engineered foam makes pad more durable and attractive than ever.
The shoulder pad fits the contour of your shoulder.
Touch fastener tabs which adjust to fit straps up to 2.75″ wide.SKU: DOM-725-310 -
Accessory bags
Domke Filmguard Bag/Large
Indent Item
Designed to protect unprocessed film from harmful X-rays during airport security and customs checks. Lead-lined bags also protect other sensitive media from the low-dosage X-ray machines used in airports around the world. Without FilmGuard, unprocessed film can become fogged or streaked. Use FilmGuard in carry-on luggage, because checked luggage is exposed to high-dosage X-rays that FilmGuard cannot protect against.
FilmGuard bags were tested for effectiveness by InVision Technologies, Inc., manufacturers of the only Federal Aviation Administration-approved checked-luggage scanning system. Films with up to ISO 800 speeds were tested. The extensive tests showed that the FilmGuard design will protect film and disks from the low-dosage x-ray units used to check carry-on luggage. (The tests also showed that the amount of lead needed to protect film from high-dosage x-ray units would make the bags too heavy to be practical.)
Triple-layer construction also keeps dust and moisture out: lead-impregnated vinyl sheet sandwiched between an outer shell of ballistic nylon and interior lining of smooth lining. Available in three sizes, in black only.
SKU: DOM-711-15B -
Accessory bags
Domke Filmguard Bag/Mini
Indent Item
Designed to protect unprocessed film from harmful X-rays during airport security and customs checks. Lead-lined bags also protect other sensitive media from the low-dosage X-ray machines used in airports around the world. Without FilmGuard, unprocessed film can become fogged or streaked. Use FilmGuard in carry-on luggage, bacause checked luggage is exposed to high-dosage X-rays that FilmGuard cannot protect against.
FilmGuard bags were tested for effectiveness by InVision Technologies, Inc., manufacturers of the only Federal Aviation Administration-approved checked-luggage scanning system. Films with up to ISO 800 speeds were tested. The extensive tests showed that the FilmGuard design will protect film and disks from the low-dosage x-ray units used to check carry-on luggage. (The tests also showed that the amount of lead needed to protect film from high-dosage x-ray units would make the bags too heavy to be practical.)
Triple-layer construction also keeps dust and moisture out: lead-impregnated vinyl sheet sandwiched between an outer shell of ballistic nylon and interior lining of smooth lining. Available in three sizes, in black only.
SKU: DOM-711-11B -
Accessory bags
Domke Filmguard Bag/Small
Indent Item
Designed to protect unprocessed film from harmful X-rays during airport security and customs checks. Lead-lined bags also protect other sensitive media from the low-dosage X-ray machines used in airports around the world. Without FilmGuard, unprocessed film can become fogged or streaked. Use FilmGuard in carry-on luggage, because checked luggage is exposed to high-dosage X-rays that FilmGuard cannot protect against.
FilmGuard bags were tested for effectiveness by InVision Technologies, Inc., manufacturers of the only Federal Aviation Administration-approved checked-luggage scanning system. Films with up to ISO 800 speeds were tested. The extensive tests showed that the FilmGuard design will protect film and disks from the low-dosage x-ray units used to check carry-on luggage. (The tests also showed that the amount of lead needed to protect film from high-dosage x-ray units would make the bags too heavy to be practical.)
Triple-layer construction also keeps dust and moisture out: lead-impregnated vinyl sheet sandwiched between an outer shell of ballistic nylon and interior lining of smooth lining. Available in three sizes, in black only.
SKU: DOM-711-12B -
Setwear and belts
Domke Photogs Vest Sand/Large
Indent Item
The size large PhoTOGS Vest from Domke is a cargo vest made from 100% cotton. This vest is full-cut and pigment-dyed for a stylish stonewashed appearance. It has 12 pockets on the front and back including cargo pockets, large back pockets, pen or pencil pockets, hand warmer pockets, and a designated water bottle pocket on the back. A removable press pass/ID holder is also included. The pockets have weather-tight zipper closures and the cargo pockets are lined with waterproof nylon. Cotton mesh panels on the yoke and rear provide cooling ventilation. The shoulders and collar are padded for enhanced comfort.
Pockets
Cargo pockets are lined with waterproof nylon
Pockets have weather-tight zipper closures
Large back pockets
Pen/pencil pocketsSKU: DOM-VEST-Sand-LG -
Setwear and belts
Domke Photogs Vest Sand/Medium
Indent Item
The size medium PhoTOGS Vest from Domke is a cargo vest made from 100% cotton. This vest is full-cut and pigment-dyed for a stylish stonewashed appearance. It has 12 pockets on the front and back including cargo pockets, large back pockets, pen or pencil pockets, hand warmer pockets, and a designated water bottle pocket on the back. A removable press pass/ID holder is also included. The pockets have weather-tight zipper closures and the cargo pockets are lined with waterproof nylon. Cotton mesh panels on the yoke and rear provide cooling ventilation. The shoulders and collar are padded for enhanced comfort.
Pockets
Cargo pockets are lined with waterproof nylon
Pockets have weather-tight zipper closures
Large back pockets
Pen/pencil pocketsSKU: DOM-VEST-Sand-MD -
Setwear and belts
Domke Photogs Vest Sand/XL
Indent Item
The size x-large PhoTOGS Vest from Domke is a cargo vest made from 100% cotton. This vest is full-cut and pigment-dyed for a stylish stonewashed appearance. It has 12 pockets on the front and back including cargo pockets, large back pockets, pen or pencil pockets, hand warmer pockets, and a designated water bottle pocket on the back. A removable press pass/ID holder is also included. The pockets have weather-tight zipper closures and the cargo pockets are lined with waterproof nylon. Cotton mesh panels on the yoke and rear provide cooling ventilation. The shoulders and collar are padded for enhanced comfort.
Pockets
Cargo pockets are lined with waterproof nylon
Pockets have weather-tight zipper closures
Large back pockets
Pen/pencil pocketsSKU: DOM-VEST-Sand-XL -
Road cases
Encore 18RU Standard 19 Rack Mount Case with Castors; 500mmD (between Covers) – Black
• 9mm Laminated Plywood construction
• Egg-carton foam lid lining on front and back covers
• 4 x recessed handles
• 8 x Spring Loaded Padlockable Penn Elcom Butterfly Latches (12RU and above)
• Standard front and back dual rack strips including 10 pack cage nuts
• Double Angle aluminium extrusions
• Penn Elcom heavy duty castors (12RU and above)
• External Dimensions: 544mmL x 693mmD x 1009mmH
• Internal Dimensions: 490mmL x 470mmD x 800mmHSKU: ECR-ES-RM-R18U -
Hard cases
Encore 2RU Standard 19″ Rack Mount Case 500mmD (Between Covers) – Black
- 9mm Laminated Plywood construction
- Egg-carton foam lid lining on front and back covers
- 4 x recessed handles
- 8 x Spring Loaded Padlockable Penn Elcom Butterfly Latches (12RU and above)
- Standard front and back dual rack strips including 10 pack cage nuts
- Double Angle aluminium extrusions
- Penn Elcom heavy duty castors (12RU and above)
- External Dimensions: 542mmL x 705mmD x 170mmH
- Internal Dimensions: 490mmL x 466mmD x 110mmH
SKU: ECR-ES-RM-R2UE -
Hard cases
Encore 2RU Standard 19″ Rack Mount Case; 200mmD (excluding Covers) – Black
- 9mm Laminated Plywood construction
- Egg-carton foam lid lining on front and back covers
- 4 x recessed handles
- 8 x Spring Loaded Padlockable Penn Elcom Butterfly Latches (12RU and above)
- Standard front and back dual rack strips including 10 pack cage nuts
- Double Angle aluminium extrusions
- Penn Elcom heavy duty castors (12RU and above)
- External Dimensions: 538mmL x 404mmD x 150mmH
- Internal Dimensions: 490mmL x 160mmD x 110mmH
SKU: ECR-ES-RM-R2UE-S200 -
Hard cases
Encore 2RU Standard 19″ Rack Mount Case; 300mmD (excluding Covers) – Black
- 9mm Laminated Plywood construction
- Egg-carton foam lid lining on front and back covers
- 4 x recessed handles
- 8 x Spring Loaded Padlockable Penn Elcom Butterfly Latches (12RU and above)
- Standard front and back dual rack strips including 10 pack cage nuts
- Double Angle aluminium extrusions
- Penn Elcom heavy duty castors (12RU and above)
- External Dimensions: 564mmL x 480mmD x 155mmH
- Internal Dimensions: 490mmL x 260mmD x 109mmH
SKU: ECR-ES-RM-R2UE-S300