Enlargers and copy stands

• Column made of special aluminum multisection tubing, matt black anodized, with cm and inch scales.
• Camera carrier made of aluminum section, can be horizontally adjusted over approx. 25 cm (9.8 in.) with rack-and-pinion parallel guides.
• Left hand/right hand operation, two blocking screws prevent inadvertent changing of the adjusted position.
• Camera mounting plate tiltable by ? 90?.
• Connecting screw horizontally adjustable.
• Height adjustment motorized, with two speeds.
• Cable remote control.
• Constant adjustment speed, independent of load.
• Automatic end switch by magnet sensor.

Specifications:

• Column height: 1.80 m (5.9 ft.)
• Column cross section: 105 x 74 mm (4.1 x 2.9 in.)
• Loading capacity: 8 kg (17.6 lbs.)
• Camera mounting plate: 130 x 78 mm (5.1 x 3.1 in.)
• Reversing mounting thread: 1/4? / 3/8? changeable

Accessories

Accessories

LED daylight lighting unit with thermo-management, consisting of two light banks for even and soft illumination.

For best reproducibility a thermo-management is necessary because light-emitting diodes also convert energy into heat, although the efficiency of LEDs is much higher than that of conventional light sources. As the temperature rises, both the brightness and the color temperature would change.

The integrated thermo-management ensures that the set brightness and color temperature always remain constant, regardless of the room and unit temperature, thus achieving reproducible results. In addition, the LEDs have a longer service life.

This thermo-management includes both sensor-controlled temperature monitoring with dynamic compensation control and elaborate passive cooling via LED board and aluminum housing.

Each light equipped with 272 selected white SMD LEDs, 5600 Kelvin, CRI = 95. Emitted light has absolutely no IR and UV content, is flicker free without residual ripple. Lights can be dimmed separately or synchronously in 1 %-steps from 10 % up to 100 %. Illuminated info screen.

The light intensity of the two LED panels is matched to each other. This results in precisely homogeneous illumination with symmetrical alignment of the two light banks.

Memory function: The copy lighting starts with the brightness that was set before the last switch-off.

Lamp housings made of sturdy anodized aluminum section, can be swiveled, shifted and adjusted in height. Detachable soft screens. Vertical arms with height markings, tiltable with detents. Mounted with strong die-cast clamp bases, clamp width up to 48 mm (1.9 in.). Comes with mains adapter.

Specifications:

Lights
LED arrays: 2 x 272 SMD LEDs
Color temperature: 5600 K
Color rendition index: CRI = 95
LED angle of radiation: 100?
Max. illumination* with soft screen: 6800 lux?
? ? ? ? ? ? ? ? ? ? ? ? ? ? ?w/o soft screen: 8000 lux
* based on uniform illumination of a 16.5 x 11.5 in. flat subject

Power consumption: 2 x ? 40 W
Operating voltage: 24 V
Light emitting area of one light: 58 x 16.5 cm (22.8 x 6.5 in.)
Vertical arms: 76 cm (29.9 in.) length / 20 x 20 mm (0.8 x 0.8 in.) edge dimension?

Mains adapter
Input: 100-240 V, 50/60 Hz
Output: 24 V, 4 A
Mains lead: approx. 2.50 m (8.2 ft.)

The RB 560 AL lighting unit is suitable for copy stands of the R1 System and RD system.

Accessories

LED daylight lighting unit with thermo-management, consisting of two light banks for even and soft illumination.

For best reproducibility a thermo-management is necessary because light-emitting diodes also convert energy into heat, although the efficiency of LEDs is much higher than that of conventional light sources. As the temperature rises, both the brightness and the color temperature would change.

The integrated thermo-management ensures that the set brightness and color temperature always remain constant, regardless of the room and unit temperature, thus achieving reproducible results. In addition, the LEDs have a longer service life.

This thermo-management includes both sensor-controlled temperature monitoring with dynamic compensation control and elaborate passive cooling via LED board and aluminum housing.

Each light equipped with 272 selected white SMD LEDs, 5600 Kelvin, CRI = 95. Emitted light has absolutely no IR and UV content, is flicker free without residual ripple. Lights can be dimmed separately or synchronously in 1 %-steps from 10 % up to 100 %. Illuminated info screen.

The light intensity of the two LED panels is matched to each other. This results in precisely homogeneous illumination with symmetrical alignment of the two light banks.

Memory function: The copy lighting starts with the brightness that was set before the last switch-off.

Lamp housings made of sturdy anodized aluminum section, can be swiveled, shifted and adjusted in height. Detachable soft screens. Vertical arms with height markings, tiltable with detents. Mounted with strong die-cast clamp bases, clamp width up to 55 mm (2.2 in.). Comes with mains adapter.

Specifications:

Lights
LED arrays: 2 x 272 SMD LEDs
Color temperature: 5600 K
Color rendition index: CRI = 95
LED angle of radiation: 100?
Max. illumination* with soft screen: 6800 lux?
? ? ? ? ? ? ? ? ? ? ? ? ? ? ?w/o soft screen: 8000 lux
* based on uniform illumination of a 16.5 x 11.5 in. flat subject

Power consumption: 2 x ? 40 W
Operating voltage: 24 V
Light emitting area of one light: 58 x 16.5 cm (22.8 x 6.5 in.)
Vertical arms: 87 cm (34.3 in.) length / 25 x 25 mm (1.0 x 1.0 in.) edge dimension?

Mains adapter
Input: 100-240 V, 50/60 Hz
Output: 24 V, 4 A
Mains lead: approx. 2.50 m (8.2 ft.)

The RB 570 AX lighting unit is suitable for copy stands of the rePRP System and for 5600 (from RD System).

Accessories

Extremely sturdy column, made of a multi-section special extrusion, black anodized, with printed cm and inch scales with two-level motor-driven adjustment.

• Camera carrier and base board with individual motorized height adjustment.
• Two travel speeds, independent of load.
• Self-limiting worm gear: any height position is exactly held.
• Automatic end switch by magnet sensor. Anti-collision device.
  
• Cable remote control.
• Detachable base board made of 4 mm aluminium with stabilizing substructure.
• Camera carrier made of die-cast aluminium, horizontally adjustable by parallel guides with friction drive and hand cranks for right-hand/left-hand operation.
• Two blocking screws.
• Camera mounting plate tiltable by +/- 90?.
• Built-in spirit level.
  

Specifications:
Total height: 216 cm (85 in.)
Column cross section: 120 x 80 mm (4.7 x 3.1 in.)
Maximum load:? on camera carrier: 10 kg (22 lbs.)
??????????????????????? on base board: 15 kg (33 lbs.)
Base board: 100 x 80 cm (39.4 x 31.5 in.)
Camera platform: 13 x 13 cm (5.1 x 5.1 in.)
Connecting thread (interchangeable): 1/4? / 3/8?

Accessories