Camera rigs

TheSmallRig aluminium constructed 1241 Cold Shoe directly mounts to any camera accessory with 1/4″-20 or M2.5 threads so it can be used to mount your camera to rigs, brackets, and cages. You can adapt a microphone, video light, or other accessory to the mount, just follow the arrows at the top that show the direction to slide the accessory in. The bending bevels inside the mount prevent the accessory from sliding out or becoming accidentally removed.

The SmallRig Tripod Mounting Kit with 2 x Plates and 2 x 15mm Rod Clamps is designed with two mounting plates, enabling you to offset the weight of a front-heavy camera rig so the rig remains balanced on your tripod. Two 15mm LWS rod clamps can be used separately or together on the baseplate to support camera accessories. The baseplates feature non-slip top surfaces, multiple 1/4″-20 and 3/8″-16 camera mounts, and thumb-lever locks. A center slot provides 1.6″ of front-to-back adjustment for optimally positioning your camera on the baseplate.

Contoured for a comfortable grip, the SmallRig Right-Side Wooden Handgrip with ARRI-Standard Rosette mounts onto your camera rig’s ARRI-standard rosette. The rosette allows the handle to rotate 360¬∞ for your desired position. Fasten the grip’s rosette component to one of several positions on the grip using the two M4 screws to adjust its vertical position and rotate the rosette itself to your preferred tilt angle. The center M6 screw may be removed for use with a rig requiring a female thread. This lightweight right-side grip is constructed with rosewood and aluminum.

Replace your existing shotgun mount or add a new one to your rig with this SmallRig Universal Shotgun Microphone Mount. The sturdy aluminum mount can fit shotgun mics from 19 to 25mm in diameter in its clamp, and it features silicone pads to absorb bumps and prevent scratches. A spring-loaded locking thumbscrew secures your microphone in place. The base is a 15mm rod clamp that can mount on standard 15mm rods.

The SmallRig Cold Shoe 2-Pack is designed for camera cages, top handles, and other supports that offer a 1/4″-20 threaded hole with an M2.5 threaded hole on the top and bottom of it. The shoe mounts feature the same threaded holes and matching screws are supplied. Two shoe mounts are included for expanding your rig to support additional accessories. Arrow markers on each one indicate which side your accessory should be mounted from. You can also attach these shoe mounts to your rig via the 1/4″-20 thread alone but without the anti-twist protection that the M2.5 threads are intended to provide.