Showing 1201–1215 of 1272 results
This camera cage provides complete protective armor for the Sony a7, a7 II, a7 III, a7S, a7S II, a7R, a7R II, a7R III, and a9 cameras.
It provides several 1/4”-20 and 3/8”-16 mounting points as well as two cold shoe mounting points.
The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup.
A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations.
The quick release top handle and various optional side handles can be attached to the cage to provide for different ways to comfortably operate your camera setup.
This kit of the Sony a7/a9 cage will help to fully build out your setup. It includes: the base Sony a7/a9 cage, quick release top handle, Tilta Hand Strap, Arca and Manfrotto quick release baseplates, two different bottom plates depending on the camera you are mounting into the cage, a 15mm LWS baseplate for mounting accessories (as well as 15mm rods for the plate), an HDMI to Micro HDMI adapter, a Nucleus Nano run/stop cable for the Sony a7/a9, various clamps to attach the HDMI adapter and R/S cables comfortably to the cage, and finally the Tiltaing Side Power Handle Type III (F570 Battery).
** Note that this version of the Full Camera Cage for Sony a7/a9 Series is no longer being manufactured and that a new version is coming soon that will be compatible with the Sony a7R IV
This camera cage provides complete protective armor for the Sony a7C camera.
It provides several 1/4”-20 mounting points, two cold shoe mounting points as well as Rod Attachment Port which supports our Single Rod Holders.
This allows you to easily secure a 15mm rod to your cage.
The base of the cage also provides several mounting points when attaching your camera to gimbals to more easily fine tune the balance of your setup.
A variety of different base-plates can be attached to the bottom of the cage via ¼”-20 threads, allowing for various rod mounting and optional power supply configurations.
The cage also natively supports our 15mm LWS Baseplate and the included Manfrotto Quick Release Plate allows you to easily mount this cage to any Manfrotto receiver.
The included Quick Release Top Handle and various optional side handles can be attached to the cage to provide for different ways to comfortably operate your camera setup.
This camera cage provides complete protective armor for the Sony a7C camera.
It provides several 1/4”-20 mounting points, two cold shoe mounting points as well as Rod Attachment Port which supports our Single Rod Holders.
This allows you to easily secure a 15mm rod to your cage.
The base of the cage also provides several mounting points when attaching your camera to gimbals to more easily fine tune the balance of your setup.
A variety of different base-plates can be attached to the bottom of the cage via ¼”-20 threads, allowing for various rod mounting and optional power supply configurations.
The cage also natively supports our 15mm LWS Baseplate and the included Manfrotto Quick Release Plate allows you to easily mount this cage to any Manfrotto receiver.
The included Left Side Wooden Handle can be attached to the cage to provide different ways to comfortably operate your camera setup.
This “half” camera cage provides protective armor for the Sony a7S III camera. It provides several 1/4”-20 mounting points as well as one cold shoe mounting point.
The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup.
A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations.
A Tiltaing Lightweight Quick Release Top Handle with Arri Locating Pins can be attached to the cage to provide for a comfortable camera operating setup.
This kit of the Sony a7S III cage includes: the Half Camera Cage for Sony a7S III, a NATO rail that attaches to the side of the cage, a wooden side handle that attaches via the NATO rail connection, and finally a cold shoe attachment that mounts to the top of the wooden handle to allow for various accessories to be attached.
The Tilta Tiltaing Sony a7SIII Pro Kit (Black) provides complete protective armor for the Sony a7S III camera.
It provides several 1/4?-20 and 3/8?-16 mounting points, two cold shoe mounting points, one rosette connection to allow you to attach various side handles, as well as an opening for a single 15mm rod.
This SSD Drive Holder allows you to mount our new M2 SSD Case to any 1/4″-20 thread.
This allows you to easily record to an external SSD while providing the more flexibility in terms of where you can mount your drive.
Compatible with most of our camera cages and our older model NVMe and SATA M2 Cases.
This Top Camera Support Bracket attaches from the base of the height adjustment arm of the DJI RS2, RS3 & RS3 Pro to the top of your camera via a cold shoe mounting point.
This provides added stability for your camera setup and can help improve the performance of your gimbal.
This type of of support bracket is an especially helpful accessory for a system like our Hydra Alien.
It functions as an additional point of contact between the gimbal and camera body which can help stabilize the gimbal at higher speeds as well as provide additional security.
The Top Camera Support Bracket is compatible with the DJI RS2, RS3, and RS3 Pro.
This Extension Accessory for RED V-RAPTOR allows you to extend your Top Handle which offers additional mounting points and increased flexibility when handling.
This Extension includes a removable section that further extends the handle if needed to accommodate larger batteries.
The curved design of this handle extension is a great option for expanding ways in which you can operate the camera particularly at lower angles.
This Top Handle for the DJI Ronin 4D is the perfect lightweight accessory for mounting additional accessories and increasing flexibility when operating your camera.
This Top Handle attaches to the top of the Ronin 4D via four points of contact for an incredibly secure connection and features a Rosewood finish for comfortable handling.
This Handle features multiple 1/4″-20 and 3/8″-16 threads with locating pins which support a range of accessories such as external monitors, wireless video transmitters, or articulating arms.
The original Ronin 4D Monitor is fully compatible with this Top Handle, allowing you to mount the monitor via a horizontal cold shoe receiver.
The mounting points on top of this handle allow you to mount the 4D upright when using the Hydra Alien Car Mounting System.
This allows you to take full advantage of the Z-Axis stabilization for smoother shots that would normally not be possible if you were mounting the system via the threads on the bottom of the camera.
This Top Handle attaches to both the Top Plate and Front Top Plate for RED V-RAPTOR which creates a secure point of contact for handling and operating your camera while also providing additional mounting points for accessories.
This Top Handle features both 1/4”-20 and 3/8”-16 mounting points with locating pins as well as one cold shoe receiver.
This Handle mounts to our Top Plates via four ¼”-20 screws for improved security especially when supporting heavier camera builds.
This Handle can also be broken down into a more compact configuration that only requires the Front Top Plate to mount in order to better accommodate lightweight camera builds.
The newly designed 15mm rod mount allows you to mount a single 15mm rod either parallel or perpendicular to the Top Handle, allowing for more flexibility when mounting electronic viewfinders or external monitors.
Lishuai Mount Adapter Bowens Mount to 50D Mount 
Peak Design Mobile Everyday Fabric Case Pixel 9 - Charcoal 
Tilta Tiltaing V-Mount Battery Plate V2- Tilta Grey 
