-
×
Aputure INFINIBAR Hexagon Flat Connector
1 × $99.00
Subtotal: $99.00
Grip
Showing 46–60 of 1215 results
-
Trays and monitor brackets
9.Solutions Tilt stud adaptor
The Tilt Adaptor is an articulating link featuring a friction locking disc that can securely and accurately set the angle between its built in 5/8″ pin and its corresponding 5/8″ receptacle via its adjustable tension lever. This allows users to quickly and precisely change the position of any mounted equipment. The ergonomic lever makes it easy to lock down the friction disc in confined spaces while the twist resistant 5/8″ pin prevents rotation when locked down. The Tilt Adaptor works great in combination with 9.Solutions” VESA Mounts (sold separately) to tilt and position monitors.
SKU: 9SL-9.VT5098 -
Trays and monitor brackets
9.Solutions VESA mount large (200mm)
The Large VESA to 5/8″ Receptacle allows small, medium, and large VESA
compatible monitors to be mounted on standard grip equipment via its 5/8″
receptacle or 1/4″-20 and 3/8″-16 female threaded tap-ins. It has two 5/8″
receptacles allowing you to mount monitors from below or from the back.
The Large VESA to 5/8″ Receptacle works well with a variety of industry standard
light stands, as well as the 9.Solutions El-Bo Arm (sold separately) that allows
you to easily reposition the monitor.It can accommodate monitors with the following mounting pattern 75×75,100×100,
100×200, and 200x200mm.SKU: 9SL-9.XV1024 -
Trays and monitor brackets
9.Solutions VESA to 5/8 Receptacle
The VESA to 5/8″ Receptacle allows small to medium sized VESA compatible monitors to be mounted on standard grip equipment via its 5/8″ receptacle or 1/4″-20 and 3/8″-16 female threaded tap-ins. It has two 5/8″ receptacles allowing you to mount monitors from below on stands or from the back via a horizontally mounted pin or articulating arm.
The VESA mount works well with the 9.Solutions El-Bo Arm, allowing you to easily reposition the monitor.SKU: 9SL-9.XV1014 -
Adaptors, Spigots and Studs
Accsoon ACC03 Monitor mounting Adaptor
The Accsoon ACC03 Monitor mount adaptor is designed to allow a CineView unit to mount to various monitors, cages and cameras in different ways. It is especially suited for use where the user is building a director’s monitor setup with both monitor and RX unit powered from a separate battery. It is also suitable for use with several popular monitors with dual NP battery slots where the second battery can be used to power the monitor. In both cases, power is supplied to the RX via DC barrel connector from an external battery. Another option is to turn an unused battery slot in a monitor, camera, RX or TX unit into a useful series of 1/4″ 20 and 3/8″ holes for mounting other accessories.
Suitable for use with several popular monitors with dual NP battery slots where the second battery can be used to power the monitor. *Please note that the ACC03 is a purely mechanical adapter with no power pass thru capability.
Users will need to power their CineView units via the DC barrel connection when using the ACC03.
SKU: ACC-ACC03 -
Adaptors, Spigots and Studs
Accsoon ACC05 Seemo Mounting Adaptor Plate
Constructed of lightweight aluminum the new ACC05 plate allows the main body of the SeeMo to simply clip onto it. Together they form a single compact unit that can then attach directly to a wide range of setups via a standard 1/4 20 screw thread. An anti-rotation pin further secures the ACC05 when used with cages with the appropriate hole pattern.
SKU: ACC-ACC05 -
Background Supports and Autopoles
Accsoon SR-01 Support rod set for Toprig S60 Motorised Slider
Adjustable length. The length can be adjusted from 49cm to 76cm, to fit different tripodd sizes.
Adjustable C Clamp. The width of the C clamp can change from 10mm to 55mm, to enable clamping to most tripod legs.
There are 1/4 thread mount holes on the bottom of the side plate, which can be used with support rods. We recommend using the support rodes when using the Toprig slider on an angle.SKU: ACC-ACSR01 -
Tube and Bar Holders and Connectors
Aputure INFINIBAR 3-Way Flat Connector
While Stocks Last
The INFINIBAR 3-Way Flat Connector is an all-metal mounting accessory that is designed to be used with any INFINIBAR (PB3/PB6/PB12) to create a rotating lighting shape consisting of three INFINIBAR lights. This connector can be used in conjunction with any INFINIBAR fixture to produce a variety of special lighting shapes and designs.
Each connector also features DC barrel connectors that allow the INFINIBARs to share power when being charged.
The 3-Way Flat Connector also features a baby pin with a 1/4-20in screw thread at the center of the connector for additional mounting onto C-stands or other stands with baby pin receivers.
SKU: APU-24.APD0300A35 -
Tube and Bar Holders and Connectors
Aputure INFINIBAR 4-Way Flat Connector
While Stocks Last
The INFINIBAR 4-Way Flat Connector is an all-metal mounting accessory that is designed to be used with any INFINIBAR (PB3/PB6/PB12) to create a rotating cross lighting shape consisting of four INFINIBAR lights. This connector can be used in conjunction with any INFINIBAR fixture to produce a variety of special lighting shapes and designs.
Each connector also features DC barrel connectors that allow the INFINIBARs to share power when being charged.
The 4-Way Flat Connector also features a baby pin with a 1/4-20in screw thread at the center of the connector for additional mounting onto C-stands or other stands with baby pin receivers.
SKU: APU-24.APD0300A36 -
Tube and Bar Holders and Connectors
Aputure INFINIBAR 6-Way Flat Connector
While Stocks Last
The INFINIBAR 6-Way Flat Connector is an all-metal mounting accessory that is designed to be used with any INFINIBAR (PB3/PB6/PB12) to create a rotating lighting shape consisting of six INFINIBAR lights. This connector can be used in conjunction with any INFINIBAR fixture to produce a variety of special lighting shapes and designs. Each connector also features DC barrel connectors that allow the INFINIBARs to share power when being charged.
The 6-Way Flat Connector also features a baby pin with a 1/4-20in screw thread at the center of the connector for additional mounting onto C-stands or other stands with baby pin receivers.
SKU: APU-24.APD0300A37 -
Tube and Bar Holders and Connectors
Aputure INFINIBAR Hexagon 3D Connector
While Stocks Last
The INFINIBAR Hexagon 3D Connector is an all-metal mounting accessory that is designed to be used with any INFINIBAR (PB3/PB6/PB12) to create hexagonal or other uniquely angled three-dimensional (inward-facing) lighting shapes. This connector can be used in conjunction with any INFINIBAR fixture to produce a variety of special lighting shapes and designs.
Each connector also features DC barrel connectors that allow the INFINIBARs to share power when being charged.
Each connector also features a 1/4-20in screw thread for additional mounting with the included 1/4-20in eyebolts or other accessories.
SKU: APU-24.APD0300A34 -
Tube and Bar Holders and Connectors
Aputure INFINIBAR Hexagon Flat Connector
While Stocks Last
The INFINIBAR Hexagon Flat Connector is an all-metal mounting accessory that is designed to be used with any INFINIBAR (PB3/PB6/PB12) to create hexagonal or other uniquely angled lighting shapes.
Each connector features DC barrel connectors that allow the INFINIBARs to share power when being charged.
Each connector also features a 1⁄4-20in screw thread for additional mounting with the included 1⁄4-20in eye-bolts or other accessories.
SKU: APU-24.APD0300A33
