-
×
Aputure INFINIBAR Square Flat Connector
1 × $79.00
Subtotal: $79.00
Grip
Showing 61–75 of 1215 results
-
Tube and Bar Holders and Connectors
Aputure INFINIBAR Multi Light Shaping Kit
The INFINIBAR Multi-Light Shaping Kit is a rock-solid fixture- building hardware kit that allows users to create a wide number of shapes with the Aputure INFINIBAR PB3, PB6, and PB12 LED Pixel Bars. With all–metal splicing connectors that can share power across INFINIBARs and eye bolts for rigging, filmmakers and lighting designers can fully unleash their creativity with a light shaping kit that can be fully tailored to the needs of a production.
What’s in the Box
- INFINIBAR Multi-Light Shaping Kit Hard Case x 1
- INFINIBAR 3-Way Flat Connector x 1
- INFINIBAR 4-Way Flat Connector x 1
- INFINIBAR 6-Way Flat Connector x 1
- INFINIBAR Triangle Flat Connector x 3
- INFINIBAR Triangle 3D Connector x 3
- INFINIBAR Square Flat Connector x 4
- INFINIBAR Square 3D Connector x 4
- INFINIBAR Hexagon Flat Connector x 6
- INFINIBAR Hexagon 3D Connector x 6
- 1⁄4-20in Eye Bolt x 12
- 5mm Hex Wrench x 1
SKU: APU-24.APD0300A30 -
Tube and Bar Holders and Connectors
Aputure INFINIBAR Square 3D Connector
While Stocks Last
The INFINIBAR Square 3D Connector is an all-metal mounting accessory that is designed to be used with any INFINIBAR (PB3/PB6/PB12) to create an inward facing square fixture or other uniquely angled lighting shapes. Each connector features DC barrel connectors that allow the INFINIBARs to share power when being charged.
Each connector also features a 1⁄4-20in screw thread for additional mounting with the included 1⁄4-20in eye-bolts or other accessories.
SKU: APU-24.APD0300A39 -
Tube and Bar Holders and Connectors
Aputure INFINIBAR Square Flat Connector
While Stocks Last
The INFINIBAR Square Flat Connector is an all-metal mounting accessory that is designed to be used with any INFINIBAR (PB3/PB6/PB12) to create square or other uniquely angled lighting shapes.
Each connector features DC barrel connectors that allow the INFINIBARs to share power when being charged.
Each connector also features a 1⁄4-20in screw thread for additional mounting with the included 1⁄4-20in eye-bolts or other accessories.
SKU: APU-24.APD0300A38 -
Tube and Bar Holders and Connectors
Aputure INFINIBAR Straight Connector
This Straight Connector allows the user to arrange multiple Aputure INFINIBAR LED panel lights in a straight line consisting of multiple INFINIBAR lights.. Combine these shapes with the ability to synchronize the connected units into any number of bespoke lighting schemes. Each connector features DC barrel connectors that allow the INFINIBARs to share power when being charged and a 1/4-20″ screw thread for additional mounting with the included 1/4-20″ eye bolts or other accessories.
SKU: APU-24.APD0300A3E -
Tube and Bar Holders and Connectors
Aputure INFINIBAR Triangle 3D Connector
While Stocks Last
The INFINIBAR Triangle 3D Connector is an all-metal mounting accessory that is designed to be used with any INFINIBAR (PB3/PB6/PB12) to create triangular or other uniquely angled three-dimensional (inward-facing) lighting shapes. This connector can be used in conjunction with any INFINIBAR fixture to produce a variety of special lighting shapes and designs.
Each connector also features DC barrel connectors that allow the INFINIBARs to share power when being charged.
Each connector also features a 1/4-20in screw thread for additional mounting with the included 1/4-20in eyebolts or other accessories.
SKU: APU-24.APD0300A32 -
Tube and Bar Holders and Connectors
Aputure INFINIBAR Triangle flat Connector
While Stocks Last
The INFINIBAR Triangle Flat Connector is an all-metal mounting accessory that is designed to be used with any INFINIBAR (PB3/PB6/PB12) to create triangular or other uniquely angled lighting shapes. This connector can be used in conjunction with any INFINIBAR fixture to produce a variety of special lighting shapes and designs. Each connector also features DC barrel connectors that allow the INFINIBARs to share power when being charged.
Each connector also features a 1⁄4-20in screw thread for additional mounting with the included 1⁄4-20in eye bolts or other accessories.
SKU: APU-24.APD0300A31 -
Yokes & brand-specific mounts
Aputure LS 1200 Four Lights Bracket
While Stocks Last
- Designed for LS 1200d Pro LED Lights
- Supports up to Four Fixtures
- Allows Pan and Tilt for Each Light
- Achieves 4800W Output with LS 1200d Pro
- Four Junior Pin Receivers
- Junior Mounting Pin for Stands & Rigging
- Compatible with Other Select Fixtures
- Rosette Yoke Supports Heavy Lights
- Heavy-Duty Aluminum Frame
- Reinforced Corners for Durability
PLEASE CALL FOR AVAILABILITY
T: 03 9486 5899SKU: APU-24.APB0249A35 -
Yokes & brand-specific mounts
Aputure Motorised Yoke
Designed for Aputure’s all-new Electro Storm point-source fixtures, the Motorised Yoke is an electronic accessory that dramatically increases your workflow efficiency on set. Whether suspended or rigged in hard-to-reach areas, the Motorised Yoke allows for smooth, remote operation of 360º pan and tilt adjustments.
Precision control is key on high-end professional film sets. When pairing the Motorised Yoke with the Electro Storm CS15 or Electro Storm XT26, adjusting your light source is now faster and more accurate than ever. Control the pan and tilt of your light directly from the control box or remotely via the Sidus Link app or DMX controls, allowing you to craft the perfect shot – even when your light is rigged in hard-to-reach places. And, do it all without needing additional cables or power supplies.
SKU: APU-APP3738A91 -
Yokes & brand-specific mounts
Aputure Nova P600C Dual Head Yoke
Designed for studio use and professional applications, this Aputure Dual Head Yoke allows you to mount mount two Nova P600c lamp heads onto a single yoke, providing the equivalent surface area of a 2 x 2′ light fixture. Both lamp heads feature independent 360° tilt adjustment so you can achieve a wider spread of light or a high-intensity push in a single direction. By stacking the two units and utilizing vertical space, this dual head yoke conserves valuable space on set and allows you to consolidate stands for fast-paced shoots or to minimize rigging for long-term installations.
– Mounts two Nova P600c LED Panels onto one yoke and offers 360° tilt adjustment for both lamps
– Provides equivalent surface area of a 2 x 2′ light fixture
– Two sets of high-strength disk brake tilt locks
– Durable single piece aluminum alloy frame with built-in 1-1/8″ junior pin
– Conserves valuable space on setSKU: APU-24.NOVAP600C-DHYOKE -
Yokes & brand-specific mounts
Aputure Nova P600C Pole Operated Yoke
Designed for studio use and permanent installations, this Aputure Pole Operated Yoke allows you to mount the Nova P600c LED Panel to a lighting grid. By rotating the knobs affixed to the yoke, the pan and tilt axes of the fixture can be independently adjusted for 360° rotation. Additionally, a pole can be used to operate the pan and tilt axes from a lower height, removing the need to climb up to the lighting grid when the angle of the Nova P600c needs to be adjusted.
SKU: APU-24.NOVAP600C-POLEYOKE -
Yokes & brand-specific mounts
Aputure Quick Release Clamp for Light Storm
The versatile lightning clamp features an adjustable jaw that can clamp onto a wide variety of stand sizes, as well as a ratchet handle for easy tightening. The integrated quick release receiver has a thumb lever for easy opening, and the included quick release plate has a V-mount wedge for conveniently hanging an external battery for a light unit.
SKU: APU-25.AP0148 -
Yokes & brand-specific mounts
Aputure Skid for STORM 1000c/1200x
Stocks coming mid-January 2025.
- For Aputure STORM 1200x/1000c Lights
- Use to Place Light Flat on Ground
- Prevents Light Tipping Over
- Accommodates Attached Head Cable
- Works with CF12 Fresnel and Barndoors
- Durable Stainless Steel Support
SKU: APU-24.AA0706003G -
-
Yokes & brand-specific mounts
Arri Center Mount Yoke (SkyPanel)
The Center Mount Yoke is a ball-in-socket yoke that allows for positioning the SkyPanel in almost any orientation including vertically. The Center Mount Yoke replaces the traditional stirrup and slides on to the rail mounting system located on the back of the SkyPanel.
Ball-in-socket design
28 mm (Junior) Spigot with long “goose neck”
+/- 90OE Movement
Tool-less attached to the rail mounting system on the SkyPanel
Works with the SkyPanel S30, S60 and S120SKU: ARR-L2.0008078
