-
×
Arri L10-C LED Fresnel Hanging blue/silver
1 × $10,417.00
Subtotal: $10,417.00
Lighting
Showing 361–375 of 5106 results
-
HMI lighting
Arri EB MAX 2.5/4 ALF CCL DMX AutoScan 1000 Hz
Starting with the EB MAX 1.8 in 2017 ARRI built the foundation for a whole new range of high speed electronic ballasts – the EB MAX Range. Together with three other models − EB MAX 2.5/4, EB MAX 6/9 and EB MAX 12/18 − the MAX ballasts offer cutting-edge features with new remote control possibilities from 575 up to 18,000 W.
Combined with state-of-the-art ARRI daylight lampheads such as the True Blue Daylight or M-Series, the EB MAX Range enables optimal performance and advanced control for high image quality at any frame rate.
For ultimate ease of use, indicators on the ballast’s front panel display the lamp wattage, DMX channel, operation mode and selected lamp frequency.
SKU: ARR-L2.0016746 -
HMI lighting
Arri EB MAX 6/9 ALF CCL DMX AutoScan 1000 Hz
Starting with the EB MAX 1.8 in 2017 ARRI built the foundation for a whole new range of high speed electronic ballasts – the EB MAX Range. Together with three other models − EB MAX 2.5/4, EB MAX 6/9 and EB MAX 12/18 − the MAX ballasts offer cutting-edge features with new remote control possibilities from 575 up to 18,000 W.
Combined with state-of-the-art ARRI daylight lampheads such as the True Blue Daylight or M-Series, the EB MAX Range enables optimal performance and advanced control for high image quality at any frame rate.
For ultimate ease of use, indicators on the ballast’s front panel display the lamp wattage, DMX channel, operation mode and selected lamp frequency.
SKU: ARR-L2.0016747 -
Yokes & brand-specific mounts
Arri Fixed Center Mount Yoke (SkyPanel)
The Fixed Center Mount Yoke is a fixed 28 mm spigot that allows for direct attachment from the back of the SkyPanel to mounting hardware. The Fixed Center Mount Yoke replaces the traditional stirrup and slides on to the rail mounting system located on the back of the SkyPanel. Great for low ceilings or pointing the SkyPanel straight down or straight forward (i.e. a wall of SkyPanels)
– 28 mm (Junior) Spigot
– Tool-less attached to the rail mounting system on the SkyPanel
– Works with the SkyPanel S30, S60 and S120
– Comes with two safety loop bracketsSKU: ARR-L2.0008080 -
On light modifiers
Arri Intensifier for SkyPanel S120-C 73° HPA
This intensifier panel for SkyPanel* increases light output by up to 50% while maintaining a soft, even beam of light. The increase in output is achieved by capturing some of the light going off to the side and refocusing it in a more forward direction. Light output in the center is thereby intensified and yet the quality of the light is retained.
Increased output up to 50%
Maintains homogeneous, soft beam of light
74° Half Peak AngleSKU: ARR-L2.0009503 -
On light modifiers
Arri Intensifier for SkyPanel S30-C 73° HPA
This intensifier panel for SkyPanel* increases light output by up to 50% while maintaining a soft, even beam of light. The increase in output is achieved by capturing some of the light going off to the side and refocusing it in a more forward direction. Light output in the center is thereby intensified and yet the quality of the light is retained.
Increased output up to 50%
Maintains homogeneous, soft beam of light
74° Half Peak AngleSKU: ARR-L2.0007823 -
On light modifiers
Arri Intensifier for SkyPanel S360-C 73° HPA
This intensifier panel for SkyPanel* increases light output by up to 50% while maintaining a soft, even beam of light. The increase in output is achieved by capturing some of the light going off to the side and refocusing it in a more forward direction. Light output in the center is thereby intensified and yet the quality of the light is retained.
Increased output up to 50%
Maintains homogeneous, soft beam of light
74° Half Peak AngleSKU: ARR-L2.0015022 -
On light modifiers
Arri Intensifier for SkyPanel S60-C 73° HPA
This intensifier panel for SkyPanel* increases light output by up to 50% while maintaining a soft, even beam of light. The increase in output is achieved by capturing some of the light going off to the side and refocusing it in a more forward direction. Light output in the center is thereby intensified and yet the quality of the light is retained.
Increased output up to 50%
Maintains homogeneous, soft beam of light
74° Half Peak AngleSKU: ARR-L2.0007818 -
LED continuous monolights and fresnels
Arri L10-C LED Fresnel Hanging blue/silver
Color temperature, tint and hue can be continuously adjusted from 2,800 K to 10,000 K, between full plus or minus green and RGBW colors.
The L10 is the brightest and largest L-Series lamphead to date. Its substantial 10″ Fresnel lens and powerful output allow for more distant fixture placement and the wrapping of light around objects in a natural and pleasing way. At more than twice the brightness of the L7, the L10 is also one of the brightest LED Fresnels on the market.
Tuneability is the cornerstone of all ARRI LED fixtures and much like the L7 and L5, its smaller counterparts, the L10 is fully color tuneable. With the ability to adjust the color temperature from 2,800 K to 10,000 K, as well as the green/magenta point, users have complete control over the color output of the fixture.
In a robust housing that combines aluminum with high-strength, fiberglass-reinforced thermoplastics, the L10 is designed to withstand the stresses of diverse professional environments, from motion picture sets to television studios and everything in-between. This robust construction allows the L10 to live up to the benchmark of rugged durability set by other ARRI lighting fixtures.
SKU: ARR-L0.0003383 -
LED continuous monolights and fresnels
Arri L5-C LED Fresnel Hanging blue/silver
Color temperature, tint and hue can be continuously adjusted from 2,800 K to 10,000K, between full plus or minus green and RGBW colors.
The L5 addition to the L-Series perfectly complements the L7, allowing for more mobile lighting and a wider range of power classes for television studios. Its compact size and low weight allow the L5 to be rigged in tight places and hung from low ceilings. The L5 is also ideal for cramped location shoots and interview setups. Low heat allows safer and more comfortable shooting conditions. This versatility and superb light quality make the L5 a highly anticipated addition to the award-winning L-Series family.
New features available on the L5 include a powerCON power connector and an on-board battery input that permits industry-standard batteries to power the L5 without any sacrifice in terms of features or light output. The resulting increase in portability opens up whole new application areas, giving productions with the L5 the tremendous freedom to move and work fast.
The L5 is approximately 45 % brighter than a 300 W tungsten Fresnel, but only consumes 115 watts. When compared to the L7, the L5 is half the weight and size.
SKU: ARR-L0.0001958 -
LED continuous monolights and fresnels
Arri L5-C Plus
- Up to 90% brighter, very similar size and weight to the original L-Series
- Direct network connectivity for LAN input and light control via ArtNet and Streaming ACN
- Continuous focusability from spot to flood
- Smooth, homogeneous field of light
- Complete control over color and intensity
- Intuitive SkyPanel Classic onboard control and user interface
- Two variants: L5-C Plus and L7-C Plus in blue-silver and black with different yoke options
- Compatible with standard barndoors and L-Series accessories
SKU: ARR-L1.0048800 -
LED continuous monolights and fresnels
Arri L5-C Plus Black
- Up to 90% brighter, very similar size and weight to the original L-Series
- Direct network connectivity for LAN input and light control via ArtNet and Streaming ACN
- Continuous focusability from spot to flood
- Smooth, homogeneous field of light
- Complete control over color and intensity
- Intuitive SkyPanel Classic onboard control and user interface
- Two variants: L5-C Plus and L7-C Plus in blue-silver and black with different yoke options
- Compatible with standard barndoors and L-Series accessories
SKU: ARR-L1.0048801 -
LED continuous monolights and fresnels
Arri L5-C Plus Black PO
Pole Operated versions are “Special Order Only”. No cancelations or returns allowed.
- Up to 90% brighter, very similar size and weight to the original L-Series
- Direct network connectivity for LAN input and light control via ArtNet and Streaming ACN
- Continuous focusability from spot to flood
- Smooth, homogeneous field of light
- Complete control over color and intensity
- Intuitive SkyPanel Classic onboard control and user interface
- Two variants: L5-C Plus and L7-C Plus in blue-silver and black with different yoke options
- Compatible with standard barndoors and L-Series accessories
SKU: ARR-L1.0048803 -
LED continuous monolights and fresnels
Arri L5-C Plus PO
Pole Operated versions are “Special Order Only”. No cancelations or returns allowed.
- Up to 90% brighter, very similar size and weight to the original L-Series
- Direct network connectivity for LAN input and light control via ArtNet and Streaming ACN
- Continuous focusability from spot to flood
- Smooth, homogeneous field of light
- Complete control over color and intensity
- Intuitive SkyPanel Classic onboard control and user interface
- Two variants: L5-C Plus and L7-C Plus in blue-silver and black with different yoke options
- Compatible with standard barndoors and L-Series accessories
SKU: ARR-L1.0048802 -
LED continuous monolights and fresnels
Arri L7-C LE2 LED Fresnel Hanging blue/silver
The ARRI L-Series is a wide-ranging family of LED Fresnel that provides gaffers and lighting designers with the versatility and quality they require in digital lighting fixtures. L-Series fixtures were the first LED lights to truly incorporate Fresnel characteristics such as continuous focusability from spot to flood and a smooth, homogenous light field. Encompassing multiple power classes, the L-Series offers solutions for almost any application, from large television studios to small interview setups and everything in-between.
The L7 is a mid-range model, featuring a 7 inch Fresnel lens and accommodating the vast majority of applications. The L7 is as bright as a 1,000 W tungsten Fresnel, but only consumes 150 W.
The L7 as well as L5 and L10 take full advantage of LED technology by allowing complete control over light intensity and color. At the heart of the L-Series are a few core concepts: tuneability, color fidelity, high build quality and ease of use. Three simple knobs permit the brightness, color temperature from 2,800 K to 10,000 K and green/magenta point to be fine-tuned, while a focus knob on the side of each fixture allows for smooth adjustment of the beam spread, just like conventional source. With color mode the calibrated light engine of L7 enables to set hue and saturation values, creating a huge range of vivid colors.
In conjunction with Stellar, ARRI’s new lighting control app, the L7 brings even more features – including more than predefined gels (Lee and Rosco) and light sources known from SkyPanel.
SKU: ARR-L0.0015232 -
LED continuous monolights and fresnels
Arri L7-C Plus
- Up to 90% brighter, very similar size and weight to the original L-Series
- Direct network connectivity for LAN input and light control via ArtNet and Streaming ACN
- Continuous focusability from spot to flood
- Smooth, homogeneous field of light
- Complete control over color and intensity
- Intuitive SkyPanel Classic onboard control and user interface
- Two variants: L5-C Plus and L7-C Plus in blue-silver and black with different yoke options
- Compatible with standard barndoors and L-Series accessories
SKU: ARR-L1.0048804
