The short, 360mm Double Joint Arm from 9.Solutions has ball joints at each end with 5/8″ pins tapped with a 3/8″-16 thread. The pins and threads offer a wide means of support using optional clamps. They are loosened and tightened by a central clamping lever. Uses include support of scrims, signs, and video monitors.
$215.60
Key Features
– 2x 5/8″ Pins with 3/8″-16 Female Thread
– Load Capacity: 30.8 lb
The Avenger D244N Variable Friction Arm with large locking T-Knob is one of the most popular arms made by Avenger! Often called a Magic Arm™ the D244N is used for lights, camera and audio applications and is the industry standard for most remote rigging applications. The D244N Variable Friction Arm uses a central friction locking handle to lock all 3 points of the arm in place. The length of the arm is 53 cm/20.87 inch and is capable of holding loads up to 3 kg/6.6 lb. Typically the D244N arm is mounted on to a Super Clamp™ or a gravity cast Super Clamp™ but you can also mount it to light stands and other accessories such as wall plates by using the baby 16 mm/ 5/8 inch pin on either end of the arm. The baby pins on each end of the arms also have a 9.53 mm/ 3/8 inch thread receiver or a 6.35 mm/ 1/4 inch threaded receiver. The remote mounting possibilities of this versatile tool are endless! Recommended Accessories: C1575B, C1550, 125, 147, C155, FF3276, 014-14, 014-38, F301, F831TH.
Single articulated arm with three sections. Top attachment with a 16mm spigot 3/8” light attachment. Bottom attachment with a 16mm spigot (compatible with light attachment Superclamp) with 1/4” thread.
Single articulated arm with two sections. Top attachment with a 16mm spigot 3/8” light attachment. Bottom attachment with a 16mm spigot (compatible with light attachment Superclamp) with 1/4” thread.
Manfrotto 143BKT Bracket Camera and Umbrella for Magic or Variable Arm 
Manfrotto R3,0911 Bolt and Washer Set for 244 and 244RC Friction Arms 
Manfrotto 196AB-2 Arm Single Articulated 2 Sections 
