Extend the power of your iPad, iPad Pro, or other mobile devices while on location with the ACC04 NP-F Battery Adapter from Accsoon. Fitting a separately purchased Sony NP-F battery with two USB-C and one USB-A charging ports, and a 6.6 to 8.4V DC output, this compact adapter provides extra power to your device while working on set. Although the ACC04 is primarily designed to be mounted onto PowerCage II and PowerCage Pro II with a 1/4″-20 mount, it can also be used as a standalone charger for almost any device. Please note that charging cables are not included.
Accsoon ACC04 NP-F Battery Plate
For PowerCage II & PowerCage Pro II
2 x USB-C Charging Ports
Supports Sony NP-F Battery
$59.00
Related products
-
Battery adapters and DC couplers
Jupio ProLine V-Mount Adapter plate for 2x Sony NP-F Series Batteries
Battery adapters and DC couplersJupio ProLine V-Mount Adapter plate for 2x Sony NP-F Series Batteries
0 out of 5(0)- V-Mount Adapter plate allows you to use 2 x Sony NP-F series batteries
SKU: JUP-BVM0250 -
Battery adapters and DC couplers
Nanlite BT-BA-V Battery adaptor V-Mount
0 out of 5(0)Attach a V-Mount battery to a light stand and power your Forza 60, Pavotube 15C, or 30C.
The Nanlite BT-BA-V can be easily mounted to a light stand or boom, and provide power to a high mounted Pavotube of Forza. The DC output is suitable for the Forza 60, Forza 60B, Pavotube 15C, and Pavotube 30C.
SKU: NAN-NNBTBAV -
Battery adapters and DC couplers
Dynacore D-2BS-24 Converter V-Lock 14.8V input to 24V output
0 out of 5(0)D-2BS/A-24 is a power station designed to utilise two 14.4 volt V-Lock batteries creating a power source outputing power for any device needing 24Volts, such as an LED panel.
It can supply up to 240Watt output (24V, 10A).
Designed to work with equal power batteries where a larger capacity is preferredLCD Display indicates Output Voltage
The unit has a Low Voltage Indicator LED to warn of potential problems shown here:
Color Red=Under/Over Voltage
Color Green=Good
Green Blinking=Battery LowOutput is via 3 Pin Female XLR Output
24V, 10A, 240W(Max)A Hexagon connector can be mounted to a stand using a super clamp or convi clamp.
SKU: DYN-D-2BS-24 -
Battery adapters and DC couplers
Dynacore D-TMS Tiny Hot Swap Plate for V-Mount Pocket-Sized Batteries
Battery adapters and DC couplersDynacore D-TMS Tiny Hot Swap Plate for V-Mount Pocket-Sized Batteries
0 out of 5(0)- Allows Hot Swapping of (2) Tiny V-Mount batteries
- LED Power Indicator for each Battery Position
- Adds 2x D-tap outputs
- Wire-Free internal
- Multiple circuit protection
SKU: DYN-D-TMS -
Battery adapters and DC couplers
Tether Tools Case Relay Camera Coupler CRN5B for Nikon
0 out of 5(0)- More cost effective than purchasing multiple proprietary camera batteries
- Power sources are non-proprietary. Power your camera with the same 5V battery you use to charge phones or tablets.
- Never need to charge camera batteries again. And never run out power.
- Compatible with most Canon, Nikon, Sony, Panasonic, Fujifilm, and Olympus cameras. Check to confirm your camera model is supported.
- A Case Relay Camera Power System (sold separately) is required to use the Relay Camera Coupler.
SKU: TET-30.CRN5B




















Dynacore DS-192D(S) Battery V-Lock Separable 14.8V 96+96Wh
Shure A58WS-YL Foam Windscreen for SM58 / Beta58 (Yellow)
Gitzo Center Ball Head Series 1 Quick Release Tripod Head GH1382QD
Pelican 1500 Case Without Foam Black
Epson 3880 / 3800 T5801 Photo Black ink (80ml)
Rycote Triangular Black Mic Flag
Inca Lens Cap 46mm
Benro GoKnob 1
Setwear Pouch Mini Tool 8 x 4" Black
Shure A57AWS Locking Windscreen for Beta57 Beta57 or Beta57A (Black)
Shure AP98WS Windscreen for PGA98H and PGA98D
Rycote Overcovers Adv, Black (Pack)
Shure A3WS Foam Windscreen for PG81-XLR (Black)
Calibrite ColorChecker Classic Nano
Calibrite ColorChecker GreyScale
Epson Light Light Black ink Stylus Pro 7800/9800/7880/9880 (220ml) T6039
Shure A53M Shock Mount Microphone Clip for SM59 SM62 SM63 SM81 SM87
Dynacore D-TS Hot-Swap Adapter V-Lock




